The 802.11 Model¶
Overview¶
IEEE 802.11 a.k.a. WiFi is the most widely used and universal wireless networking standard. Specifications are updated every few years, adding more features and ever-increasing bit rates.
In INET, nodes become WiFi-enabled by adding an Ieee80211Interface
to them. (As mentioned earlier, WirelessHost and AdhocHost
already contain one in their default configuration.) APs are represented
with the AccessPoint node type. WiFi networks require a matching
transmission medium module to be present in the network, which is
usually an Ieee80211ScalarRadioMedium.
The operation mode (infrastructure vs ad hoc) is determined by the
ingredients of the wireless interface. The Ieee80211Interface has the
following submodules (incomplete list):
management: performs association/disassociation with access points, channel scanning, beaconing
agent: initiates actions such as channel scanning and connecting to and disconnecting from access points
MAC: transmits and receives frames according to the IEEE 802.11 medium access procedure
PHY: represents the radio
The management component has several implementations which differ in their role and level of detail:
Ieee80211MgmtAdhoc: for ad hoc mode stationsIeee80211MgmtSta,Ieee80211MgmtStaSimplified: for infrastructure mode stationsIeee80211MgmtAp,Ieee80211MgmtApSimplified: for access points
The “simplified” ones assume that stations are statically associated with an access point for the entire duration of the simulation (the scan-authenticate-associate process is not simulated), so they cannot be used e.g. in experiments involving handover.
The Ieee80211MgmtSta does not take any action by itself, it
requires an agent (Ieee80211AgentSta or a custom one) to initiate
actions.
The following sections examine the above components.
MAC¶
The Ieee80211Mac module type represents the IEEE 802.11 MAC. The
structure of the implementation closely follows the architecture described in
the standard, IEEE 802.11-2012 Part 11: Wireless LAN Medium Access Control (MAC)
and Physical Layer (PHY) Specifications.
The Ieee80211Mac performs transmission of frames according to the
CSMA/CA protocol. Data and management frames are received from the upper
layers and transmitted using the Ieee80211Radio.
The Ieee80211Mac was designed with modularity in mind to facilitate
experimentation with new policies, features, and algorithms within the MAC
layer. Individual components can be easily replaced with custom
implementations. Policies, which are most likely to be experimented with,
are extracted into their own modules.
The new model also separates the following components from the 802.11 standard into modules:
Coordination function:
Dcf,Hcf. The coordination functions control the medium access as specified by the standard.Channel access method as specified by the standard:
EdcaChannel access function:
Edcaf,Dcaf. The channel access function controls channel ownership, etc.MAC data services:
OriginatorMacDataService,RecipientMacDataService,OriginatorQosMacDataService,RecipientQosMacDataService. The MAC data services are implemented as compound modules, which combine functions related to transforming data frames (sequence numbering, duplicate removal, frame reordering, fragmentation, aggregation).Aggregation and deaggregation (C++ class in MAC data services): These classes implement aggregation and deaggregation according to the policy modules (see below).
Fragmentation and defragmentation (C++ classes in MAC data services): These classes carry out the task of fragmentation and defragmentation according to the policy modules (see below).
Block ACK agreements and frame reordering (C++ classes): These classes carry out the task according to the policy modules (see below).
Frame exchange sequences (implemented as C++ classes in coordination functions, like
Hcf): These classes strictly follow the standard specifying the valid frame sequences.TXOP procedure (
TxopProcedure): This module implements the transmission opportunity behavior of the standard.Duplicate removal (C++ class in RecipientMacDataService): This class removes duplicate received frames based on sequence numbers.
Rate selection:
QosRateSelection. This module controls the data rate for all kinds of frames, including management and control frames.Rate control:
AarfRateControl,OnoeRateControl. These modules determine the optimal data rate for data frames.Protection mechanism:
OriginatorProtectionMechanism. This module provides channel allocation for frame exchange sequences.Recovery procedure:
NonQosRecoveryProcedure,QosRecoveryProcedure. These modules determine what to do in case of frame exchange failure.Contention:
Contention. The contention module implements contention-based channel access, using defer, backoff, etc.PendingQueue: This module is a queue containing frames received fromhigher layers, waiting for transmission unchanged.
InProgressFrames: This modules is a queue containing frames waitingfor transmission that have been processed by the MAC data service.
TX/RX (
Tx,Rx). Responsible for simple frame transmission/reception.
The MAC model has the following replaceable built-in policy submodules by default:
ACK policy (e.g.
OriginatorAckPolicy,RecipientAckPolicy): controls the type of acknowledgment used per-frame (none, normal, block-ack)RTS/CTS policy (e.g.
RtsPolicy,CtsPolicy): determines which frames are protected by the RTS/CTS mechanismOriginator and recipient block ACK agreement policies (e.g.
OriginatorBlockAckAgreementPolicy,RecipientBlockAckAgreementPolicy): determine when and what kind of agreements are madeMSDU aggregation policy (e.g.
BasicMsduAggregationPolicy): controls which frames are aggregated into an A-MSDU and whenFragmentation policy (e.g.
BasicFragmentationPolicy): controls when and how fragmentation occurs
Physical Layer¶
The physical layer modules (Ieee80211Radio) deal with modeling
transmission and reception of frames. They model the characteristics of
the radio channel and determine if a frame was received correctly (that
is, it did not suffer bit errors due to low signal power or interference
in the radio channel). Frames received correctly are passed up to the
MAC.
On the physical layer, one can choose from several radios with different levels of detail. The various radio types (with the matching transmission medium types in parentheses) are:
Management¶
The management layer exchanges management frames via the MAC with its peer management entities in other STAs and APs. Beacon, Probe Request/Response, Authentication, Association Request/Response, etc frames are generated and interpreted by management entities and transmitted/received via the MAC layer. During scanning, it is the management entity that periodically switches channels and collects information from received beacons and probe responses.
The management layer has several implementations which differ in their
role (STA/AP/ad-hoc) and level of detail: Ieee80211MgmtAdhoc,
Ieee80211MgmtAp, Ieee80211MgmtApSimplified,
Ieee80211MgmtSta, Ieee80211MgmtStaSimplified. The
..Simplified ones differ from the others in that they do not simulate the
scan-authenticate-associate process, so they cannot be used in
experiments involving handover.
Agent¶
The agent is what instructs the management layer to perform scanning, authentication, and association. The management layer itself just carries out these commands by performing the scanning, authentication, and association procedures and reports back the results to the agent.
The agent component is currently only needed with the
Ieee80211MgmtSta module. The management entities in other NIC
variants do not have as much freedom and do not require an agent.
Ieee80211MgmtSta requires an Ieee80211AgentSta or a custom
agent. By modifying or replacing the agent, one can alter the dynamic
behavior of STAs in the network, for example, implementing different
handover strategies.