Ieee80211ScalarRadioMedium¶

Package: inet.physicallayer.wireless.ieee80211.packetlevel

compound module Ieee80211ScalarRadioMedium

This radio medium model uses scalar transmission power in the analog representation. It must be used in conjunction with the analog model in radios.

See also: ScalarMediumAnalogModel

Inheritance diagram¶

Extends¶

Name	Type	Description
Ieee80211RadioMedium	compound module	This radio medium model is part of the IEEE 802.11 physical layer model. It must be used in conjunction with the Ieee80211Radio model or other derived models.

Parameters¶

Name	Type	Default value	Description
displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
physicalEnvironmentModule	string	“physicalEnvironment”	Module path of the physical environment model
signalAnalogRepresentation	string	“scalar”
rangeFilter	string	“”	When either set to ‘interferenceRange’ or ‘communicationRange’ the radio medium doesn’t send signals to a radio if it’s outside the provided range
radioModeFilter	bool	false	When enabled, the radio medium doesn’t send signals to a radio if it’s neither in receiver nor in transceiver mode
listeningFilter	bool	false	When enabled, the radio medium doesn’t send signals to a radio if it listens on the channel in an incompatible mode (e.g. different carrier frequency and bandwidth, different modulation)
macAddressFilter	bool	false	When enabled, the radio medium doesn’t send signals to a radio if the destination MAC address differs
recordTransmissionLog	bool	false	When enabled, the medium writes one line per transmission into the communication log file
recordReceptionLog	bool	false	When enabled, the medium writes one line per reception into the communication log file
sameTransmissionStartTimeCheck	string	“error”	Specifies what should happen if two transmissions start at the same moment

Properties¶

Name	Value	Description
class	RadioMedium
display	i=misc/sun

Signals¶

Name	Type	Unit	Description
radioAdded
radioRemoved
signalAdded
signalArrivalEnded
signalArrivalStarted
signalDepartureEnded
signalDepartureStarted
signalRemoved

Unassigned submodule parameters¶

Name	Type	Default value	Description
neighborCache.refillPeriod	double

Source code¶

//
// This radio medium model uses scalar transmission power in the analog
// representation. It must be used in conjunction with the analog model
// in radios.
//
// @see ~ScalarMediumAnalogModel
//
module Ieee80211ScalarRadioMedium extends Ieee80211RadioMedium
{
    parameters:
        signalAnalogRepresentation = default("scalar");
}

File: src/inet/physicallayer/wireless/ieee80211/packetlevel/Ieee80211ScalarRadioMedium.ned