IWiredInterface¶
Package: inet.linklayer.contract
module interface IWiredInterface
Interface for wired network interfaces.
Inheritance diagram¶
Implemented by¶
Name |
Type |
Description |
|---|---|---|
compound module |
Provides an Ethernet network interface suitable for emulation. The lower part of the network interface is realized in the real world using a real Ethernet socket of the host computer which is running the simulation. |
|
compound module |
Provides an Ethernet network interface suitable for emulation. The upper part of the network interface is realized in the real world using a real TAP device of the host computer which is running the simulation. |
|
compound module |
Represents an Ethernet network interface. |
|
compound module |
Implements a network interface that is suitable for use in Ethernet 10BASE-T1S multidrop links. Such a multidrop link uses the Ethernet Phyisical Layer Collision Avoidance (PLCA) protocol. The protocol is defined in the IEEE 802.3cg-2019 standard. This network interface can be used in any network node module (e.g. StandardHost) that allows replacing its network interfaces. All network interfaces on the same multidrop link must use this module. |
|
compound module |
Represents an Ethernet network interface with Ethernet cut-through switching support. In contrast with store-and-forward switching, Ethernet cut-through switching can begin the transmission of the outgoing packet before the reception of the corresponding incoming packet ends. Ethernet cut-through switching can significantly reduce end-to-end delay in the network. |
|
compound module |
Implements an Ethernet network interface. |
|
compound module |
Implements a PPP network interface. |
Known subclasses¶
Name |
Type |
Description |
|---|---|---|
module interface |
Interface for Ethernet network interfaces. |
|
module interface |
Interface for PPP network interfaces. |
Extends¶
Name |
Type |
Description |
|---|---|---|
module interface |
Interface for network interfaces. |
Properties¶
Name |
Value |
Description |
|---|---|---|
display |
i=block/ifcard |
Source code¶
//
// Interface for wired network interfaces.
//
moduleinterface IWiredInterface extends INetworkInterface
{
parameters:
@display("i=block/ifcard");
gates:
inout phys;
}