IReceiver¶

Package: inet.physicallayer.wireless.common.contract.packetlevel

module interface IReceiver

The receiver model describes the physical process that converts electric signals into packets.

Usage diagram¶

Inheritance diagram¶

Implemented by¶

Name	Type	Description
ApskLayeredReceiver	compound module	This receiver model is part of a simple hypothetical layered radio. It receives detailed transmissions that have a separate representation for all simulated domains. The `levelOfDetail` parameter controls which domains are actually simulated, but all parameters relevant to the error model are expected to be set on the reception.
ApskReceiver	compound module	This receiver model receives a transmission successfully if the minimum of the signal-to-noise and interference ratio over the duration of the reception is sufficiently high. It uses the error model to compute the error rate based on this value and the used modulation.
NarrowbandReceiverBase	compound module	Serves as a base module for narrowband receiver models.
SnirReceiverBase	compound module	Serves as a base module for SNIR receiver models.
GenericReceiver	compound module	This receiver is part of the generic radio architecture.
Ieee80211LayeredOfdmReceiver	compound module	Implements an IEEE 802.11 OFDM receiver. The implementation details are based on the following standard: IEEE Std 802.11-2012 PART 11: WIRELESS LAN MAC AND PHY SPECIFICATIONS
Ieee80211Receiver	compound module	This receiver model receives an IEEE 802.11 transmission successfully if the minimum of the signal to noise and interference ratio over the duration of the reception is sufficiently high. It uses one of the IEEE 802.11 specific error models to compute the error rate based on this value and the used operation mode.
Ieee802154UwbIrReceiver	compound module	(no description)
Ieee802154NarrowbandReceiver	compound module	(no description)

Used in compound modules¶

Name	Type	Description
Radio	compound module	The radio model describes the physical device that is capable of transmitting and receiving signals on the medium. It contains an antenna model, a transmitter model, a receiver model, and an energy consumer model.

Properties¶

Name	Value	Description
display	i=block/wrx

Source code¶

//
// The receiver model describes the physical process that converts electric
// signals into packets.
//
moduleinterface IReceiver
{
    parameters:
        @display("i=block/wrx");
}

File: src/inet/physicallayer/wireless/common/contract/packetlevel/IReceiver.ned