ApskReceiver¶

Package: inet.physicallayer.wireless.apsk.packetlevel

compound module ApskReceiver

This receiver model receives a transmission successfully if the minimum of the signal-to-noise and interference ratio over the duration of the reception is sufficiently high. It uses the error model to compute the error rate based on this value and the used modulation.

Inheritance diagram¶

Extends¶

Name	Type	Description
NarrowbandReceiverBase	compound module	Serves as a base module for narrowband receiver models.

Parameters¶

Name	Type	Default value	Description
displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
ignoreInterference	bool	false	True means interfering transmissions are ignored when determining whether a reception is successful or not
signalAnalogRepresentation	string	“scalar”
snirThreshold	double		Reception is not successful if the SNIR is below this threshold (unsuccessful reception)
snirThresholdMode	string	“min”
energyDetection	double		No signal is detected at all below this reception power threshold (idle state)
sensitivity	double		Reception is not possible if the signal power is below sensitivity (idle or busy states)
centerFrequency	double		Center frequency of the band where this receiver listens on the medium
bandwidth	double		Bandwidth of the band where this receiver listens on the medium
modulation	string	“BPSK”	One of “BPSK”, “16-QAM”, “256-QAM”

Properties¶

Name	Value	Description
class	ApskReceiver
display	i=block/wrx

Source code¶

//
// This receiver model receives a transmission successfully if the minimum of the
// signal-to-noise and interference ratio over the duration of the reception is
// sufficiently high. It uses the error model to compute the error rate based on
// this value and the used modulation.
//
// @see ~ApskTransmitter, ~ApskRadio, ~ScalarRadioMedium,
// ~ScalarMediumAnalogModel.
//
module ApskReceiver extends NarrowbandReceiverBase
{
    parameters:
        modulation = default("BPSK");
        errorModel.typename = default("ApskErrorModel");
        @class(ApskReceiver);
}

File: src/inet/physicallayer/wireless/apsk/packetlevel/ApskReceiver.ned