DumbbellNetwork¶

network DumbbellNetwork

(no description)

Usage diagram¶

Inheritance diagram¶

Extends¶

Name	Type	Description
WiredNetworkBase	network	(no description)

Parameters¶

Name	Type	Default value	Description
displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
recordPcap	bool	false
numPcapRecorders	int	recordPcap ? 1 : 0
numModuleDumps	int	0
hasGlobalArp	bool	true

Properties¶

Name	Value	Description
class	NetworkBase

Unassigned submodule parameters¶

Name	Type	Default value	Description
pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
pcapRecorder.verbose	bool	true	Whether to log packets on the module output
pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
pcapRecorder.fileFormat	string	“pcapng”
pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
visualizer.sceneVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.sceneVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.sceneVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.sceneVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.sceneVisualizer.physicalEnvironmentModule	string	“physicalEnvironment”	The physical environment module, refers to a top-level submodule by default
visualizer.sceneVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	The network node visualizer, refers to a sibling submodule by default
visualizer.sceneVisualizer.axisLength	double	nan m	Length of x, y, and z axes, no axis by default
visualizer.sceneVisualizer.animationSpeed	double	0	Always active animation speed independent of any visualization, the value must be in the range (0, +inf)
visualizer.sceneVisualizer.sceneMinX	double	nan m	Lower bound of x coordinates in the scene
visualizer.sceneVisualizer.sceneMinY	double	nan m	Lower bound of y coordinates in the scene
visualizer.sceneVisualizer.sceneMinZ	double	nan m	Lower bound of z coordinates in the scene
visualizer.sceneVisualizer.sceneMaxX	double	nan m	Upper bound of x coordinates in the scene
visualizer.sceneVisualizer.sceneMaxY	double	nan m	Upper bound of y coordinates in the scene
visualizer.sceneVisualizer.sceneMaxZ	double	nan m	Upper bound of z coordinates in the scene
visualizer.sceneVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.sceneVisualizer.viewAngle	string	“x right y down z out”	View angle is either
visualizer.sceneVisualizer.viewScale	string	“1 1”	The 2D scale is applied after the view projection
visualizer.sceneVisualizer.viewTranslation	string	“0 0”	The 2D translation is applied after the view projection
visualizer.sceneVisualizer.descriptionFigure	string	“”	If not empty, it should be the name of a text figure; it will display the active configuration’s description
visualizer.physicalEnvironmentVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.physicalEnvironmentVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.physicalEnvironmentVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.physicalEnvironmentVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.physicalEnvironmentVisualizer.physicalEnvironmentModule	string	“physicalEnvironment”	The physical environment module that is displayed, refers to a top-level sub-module by default
visualizer.physicalEnvironmentVisualizer.displayObjects	bool	true
visualizer.physicalEnvironmentVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.networkNodeVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.networkNodeVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.networkNodeVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.networkNodeVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.networkNodeVisualizer.nodeFilter	string	“*”	Determines which network nodes are displayed. All nodes are displayed by default.
visualizer.networkNodeVisualizer.annotationSpacing	double	4
visualizer.networkNodeVisualizer.placementPenalty	double	10
visualizer.networkNodeVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.networkConnectionVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.networkConnectionVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.networkConnectionVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.networkConnectionVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.networkConnectionVisualizer.displayNetworkConnections	bool	true
visualizer.networkConnectionVisualizer.nodeFilter	string	“”	Determines which network connections are displayed. All connections are displayed by default.
visualizer.networkConnectionVisualizer.lineColor	string	“black”	Connection line color.
visualizer.networkConnectionVisualizer.lineStyle	string	“solid”	Connection line style (solid, dashed, dotted).
visualizer.networkConnectionVisualizer.lineWidth	double	1	Connection line width.
visualizer.networkConnectionVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.mobilityVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.mobilityVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.mobilityVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.mobilityVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.mobilityVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	The network node visualizer module, refers to a sibling submodule by default
visualizer.mobilityVisualizer.displayMobility	bool	true	Display mobility, enabled by default
visualizer.mobilityVisualizer.animationSpeed	double	0	Animation speed while objects are moving around, value must be in the range (0, +inf)
visualizer.mobilityVisualizer.moduleFilter	string	“**.mobility”	Which mobilities are considered, matches all mobilities by default
visualizer.mobilityVisualizer.displayPositions	bool	false	Display a circle indicating the current position, disabled by default
visualizer.mobilityVisualizer.positionCircleRadius	double	4	Radius of the circle
visualizer.mobilityVisualizer.positionCircleLineWidth	double	1	Line width of the circle
visualizer.mobilityVisualizer.positionCircleLineColor	string	“dark”	Position circle line color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.mobilityVisualizer.positionCircleFillColor	string	“dark”	Position circle fill color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.mobilityVisualizer.displayOrientations	bool	false	Display a 3D cone indicating the current orientation, disabled by default
visualizer.mobilityVisualizer.orientationPieRadius	double	32	On-screen radius of the orientation cone, in pixels
visualizer.mobilityVisualizer.orientationPieSize	double	0.2	Angular half-width of the orientation cone as a fraction of a full circle; must be in the open interval (0, 0.5)
visualizer.mobilityVisualizer.orientationPieOpacity	double	0.25	Opacity of the orientation cone
visualizer.mobilityVisualizer.orientationLineColor	string	“black”	Orientation line color, black by default
visualizer.mobilityVisualizer.orientationLineStyle	string	“solid”	Orientation line style (solid, dashed, dotted)
visualizer.mobilityVisualizer.orientationLineWidth	double	1	Orientation line width
visualizer.mobilityVisualizer.orientationFillColorUp	string	“blue”	Fill color of the orientation base disc when the cone points up (toward the viewer); empty means the disc is not filled
visualizer.mobilityVisualizer.orientationFillColorDown	string	“red”	Fill color of the orientation base disc when the cone points down (away from the viewer); empty means the disc is not filled
visualizer.mobilityVisualizer.displayVelocities	bool	false	Display an arrow indicating the current velocity, disabled by default
visualizer.mobilityVisualizer.velocityArrowScale	double	1	Velocity scaling factor to pixels
visualizer.mobilityVisualizer.velocityLineColor	string	“black”	Velocity line color, black by default
visualizer.mobilityVisualizer.velocityLineStyle	string	“solid”	Velocity line style (solid, dashed, dotted)
visualizer.mobilityVisualizer.velocityLineWidth	double	1	Velocity line width
visualizer.mobilityVisualizer.velocityProjection	string	“projected”	How the velocity arrow is projected on an equirectangular map: “projected” applies the full equirectangular distortion; “trueLength” uses the map heading (sheared direction) at true length; “isometric” preserves true heading and length. No effect without a geographic/equirectangular projection.
visualizer.mobilityVisualizer.orientationProjection	string	“projected”	How the orientation cone is projected on an equirectangular map: “projected” shears the base disc per the equirectangular distortion; “isometric” preserves true heading and length (the base disc stays circular); “trueLength” uses the map heading at true length. No effect without a geographic/equirectangular projection.
visualizer.mobilityVisualizer.displayMovementTrails	bool	false	Display a line along the recent path of mobilities, disabled by default
visualizer.mobilityVisualizer.movementTrailLineColor	string	“dark”	Movement trail line color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.mobilityVisualizer.movementTrailLineStyle	string	“solid”	Movement trail line style (solid, dashed, dotted)
visualizer.mobilityVisualizer.movementTrailLineWidth	double	1	Movement trail line width
visualizer.mobilityVisualizer.trailLength	int	100	Number of sections in the trail
visualizer.mobilityVisualizer.movementTrailSegmentHideThreshold	double	inf	Trail segments longer than this many pixels (e.g. a node wrapping across the map on an equirectangular projection) are treated as discontinuities and hidden, so the trail shows as disjoint pieces; the default (positive infinity) hides nothing
visualizer.mobilityVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.statisticVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.statisticVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.statisticVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.statisticVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.statisticVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	The network node visualizer module, refers to a sibling submodule by default
visualizer.statisticVisualizer.displayStatistics	bool	false
visualizer.statisticVisualizer.signalName	string	“”	Signal name to subscribe, no signal name by default
visualizer.statisticVisualizer.statisticName	string	signalName	Statistic name to get the value, signal name by default
visualizer.statisticVisualizer.statisticUnit	string	“”	Statistic unit, undefined by default
visualizer.statisticVisualizer.statisticExpression	string	“”	Statistic expression, received value by default
visualizer.statisticVisualizer.sourceFilter	string	“**”	Pattern that must match the signal source, no source filter by default
visualizer.statisticVisualizer.format	string	“%n: %v %u”	Determines what is displayed, info by default
visualizer.statisticVisualizer.unit	string	“”	Display the value in one of the specified units, statistic unit by default
visualizer.statisticVisualizer.font	string	“<default>”	Statistic value font, automatic by default
visualizer.statisticVisualizer.textColor	string	“black”	Statistic value font color, black by default
visualizer.statisticVisualizer.backgroundColor	string	“white”	Statistic value background color, white by default
visualizer.statisticVisualizer.opacity	double	1.0	Opacity of the visualization
visualizer.statisticVisualizer.placementHint	string	“top”	Annotation placement hint, space separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.statisticVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.statisticVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.statisticVisualizer.propertyName	string	“”	Optional property name of a figure template along the module path of the visualizer
visualizer.statisticVisualizer.propertyIndex	string	“”	Optional property index of a figure template along the module path of the visualizer
visualizer.infoVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.infoVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.infoVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.infoVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.infoVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	Module path to the network node visualizer module, refers to a sibling submodule by default
visualizer.infoVisualizer.displayInfos	bool	true
visualizer.infoVisualizer.modules	string	“”	Specifies the path of the submodules of network nodes, no submodules by default
visualizer.infoVisualizer.format	string	“%t”	Determines what is displayed on network nodes
visualizer.infoVisualizer.font	string	“<default>”	Info text font, automatic by default
visualizer.infoVisualizer.textColor	string	“black”	Info text font color
visualizer.infoVisualizer.textAlignment	string	“left”	Alignment of multi-line text
visualizer.infoVisualizer.backgroundColor	string	“white”	Text box fill color, specify an empty string for no fill
visualizer.infoVisualizer.lineColor	string	“black”	Text box outline color, specify an empty string for no line
visualizer.infoVisualizer.opacity	double	1.0	Opacity of the visualization
visualizer.infoVisualizer.placementHint	string	“top”	Annotation placement hint, space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.infoVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.infoVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.energyStorageVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.energyStorageVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.energyStorageVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.energyStorageVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.energyStorageVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	Module path to the network node visualizer module, refers to a sibling submodule by default
visualizer.energyStorageVisualizer.displayEnergyStorages	bool	false
visualizer.energyStorageVisualizer.energyStorageFilter	string	“**”	Which energy storages are considered; matches all energy storages by default
visualizer.energyStorageVisualizer.color	string	“green”
visualizer.energyStorageVisualizer.width	double	8
visualizer.energyStorageVisualizer.height	double	24
visualizer.energyStorageVisualizer.spacing	double	2
visualizer.energyStorageVisualizer.placementHint	string	“right”	Annotation placement hint; space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.energyStorageVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.energyStorageVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.mediumVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.mediumVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.mediumVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.mediumVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.mediumVisualizer.mediumModule	string	“radioMedium”	The medium module that is displayed, refers to a top-level submodule by default
visualizer.mediumVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	The network node visualizer module, refers to a sibling submodule by default
visualizer.mediumVisualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.mediumVisualizer.interfaceFilter	string	“*”	Which interfaces are considered, matches all interfaces by default
visualizer.mediumVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.mediumVisualizer.displaySignals	bool	false	Display signals propagating through the medium, disabled by default
visualizer.mediumVisualizer.signalColor	string	“dark”	Signal color is a list of colors or a color group name (e.g., dark, light), a set of dark colors by default
visualizer.mediumVisualizer.signalPropagationAnimationSpeed	double	nan	Animation speed while the very beginning or end of a signal is propagating on the medium, value must be in the range (0, +inf) or NaN, the latter means automatic setting
visualizer.mediumVisualizer.signalPropagationAnimationTime	double	1s	Signal propagation animation duration when signalPropagationAnimationSpeed is unspecified
visualizer.mediumVisualizer.signalPropagationAdditionalTime	double	0s	Additional simulation time to animate signal propagation after leaving the last receiver
visualizer.mediumVisualizer.signalTransmissionAnimationSpeed	double	nan	Animation speed while a signal is being transmitted on the medium, value must be in the range (0, +inf) or NaN, the latter means automatic setting
visualizer.mediumVisualizer.signalTransmissionAnimationTime	double	1s	Signal transmission animation duration when signalTransmissionAnimationSpeed is unspecified
visualizer.mediumVisualizer.signalAnimationSpeedChangeTimeMode	string	“realTime”	Specifies the time mode for animation speed changes between propagation and transmission animation
visualizer.mediumVisualizer.signalAnimationSpeedChangeTime	double	1s	Animation speed changes smoothly from propagationAnimationSpeed to transmissionAnimationSpeed in the specified real time
visualizer.mediumVisualizer.displaySignalDepartures	bool	false	Display an image where a signal departure is currently in progress, disabled by default
visualizer.mediumVisualizer.signalDepartureImage	string	“misc/signal_departure.png”	Image for ongoing signal departures
visualizer.mediumVisualizer.signalDeparturePlacementHint	string	“topCenter”	Annotation placement hint, space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.mediumVisualizer.signalDeparturePlacementPriority	double	1	Determines the order of annotation positioning
visualizer.mediumVisualizer.displaySignalArrivals	bool	false	Display an image where a signal arrival is currently in progress, disabled by default
visualizer.mediumVisualizer.signalArrivalImage	string	“misc/signal_arrival.png”	Image for ongoing signal arrivals
visualizer.mediumVisualizer.signalArrivalPlacementHint	string	“topCenter”	Annotation placement hint, space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.mediumVisualizer.signalArrivalPlacementPriority	double	-1	Determines the order of annotation positioning
visualizer.mediumVisualizer.displayCommunicationRanges	bool	false	Display communication ranges as circles around radios, enabled by default
visualizer.mediumVisualizer.communicationRangeLineColor	string	“blue”	Communication range circle line color, blue by default
visualizer.mediumVisualizer.communicationRangeLineStyle	string	“solid”	Communication range circle line style, solid by default
visualizer.mediumVisualizer.communicationRangeLineWidth	double	1	Communication range circle line width, 1 by default
visualizer.mediumVisualizer.displayInterferenceRanges	bool	false	Display interference ranges as circles around radios, disabled by default
visualizer.mediumVisualizer.interferenceRangeLineColor	string	“gray”	Interference range circle color, gray by default
visualizer.mediumVisualizer.interferenceRangeLineStyle	string	“solid”	Interference range circle line style, solid by default
visualizer.mediumVisualizer.interferenceRangeLineWidth	double	1	Interference range circle line width, 1 by default
visualizer.mediumVisualizer.autoPowerAxis	bool	true	Enables automatic power axis configuration
visualizer.mediumVisualizer.signalMinPower	double	inf dBmW	Minimum signal power if the axis is not automatic
visualizer.mediumVisualizer.signalMaxPower	double	0 dBmW	Maximum signal power if the axis is not automatic
visualizer.mediumVisualizer.signalMinPowerDensity	double	inf dBmWpMHz	Minimum signal power density if the axis is not automatic
visualizer.mediumVisualizer.signalMaxPowerDensity	double	-inf dBmWpMHz	Maximum signal power density if the axis is not automatic
visualizer.mediumVisualizer.autoTimeAxis	bool	true	Enables automatic time axis configuration
visualizer.mediumVisualizer.signalMinTime	double	0 s	Relative to the current simulation time
visualizer.mediumVisualizer.signalMaxTime	double	0 s	Relative to the current simulation time
visualizer.mediumVisualizer.autoFrequencyAxis	bool	true	Enables automatic frequency axis configuration
visualizer.mediumVisualizer.signalMinFrequency	double	inf Hz	Minimum signal frequency if the axis is not automatic
visualizer.mediumVisualizer.signalMaxFrequency	double	-inf Hz	Maximum signal frequency if the axis is not automatic
visualizer.mediumVisualizer.displayMainPowerDensityMap	bool	false	Display a power density map for the transmission medium, can be enabled with dimensional analog models only
visualizer.mediumVisualizer.mainPowerDensityMapPixmapDensity	double	1	Pixmap relative resolution
visualizer.mediumVisualizer.mainPowerDensityMapMinX	double	0	Minimum X coordinate
visualizer.mediumVisualizer.mainPowerDensityMapMaxX	double	nan	Maximum X coordinate, compound module size by default
visualizer.mediumVisualizer.mainPowerDensityMapMinY	double	0	Minimum Y coordinate
visualizer.mediumVisualizer.mainPowerDensityMapMaxY	double	nan	Maximum Y coordinate, compound module size by default
visualizer.mediumVisualizer.mainPowerDensityMapZ	double	0	Z coordinate
visualizer.mediumVisualizer.mainPowerDensityMapFigureXTickCount	int	3	Number of ticks along the X-axis
visualizer.mediumVisualizer.mainPowerDensityMapFigureYTickCount	int	3	Number of ticks along the Y-axis
visualizer.mediumVisualizer.displayPowerDensityMaps	bool	false	Display power density maps at the nodes, can be enabled with dimensional analog models only
visualizer.mediumVisualizer.powerDensityMapMode	string	“auto”	Total means total transmission medium, signal means transmitted or received signal, auto means total or signal and noise if transmission or reception is in progress
visualizer.mediumVisualizer.powerDensityMapPixelMode	string	“mean”	Specifies the method used to determine the color of each pixel, the sample method is the least accurate but the fastest (sample < partition < mean)
visualizer.mediumVisualizer.powerDensityMapApproximationSize	int	10	Medium power density function approximation along the X and Y axes
visualizer.mediumVisualizer.powerDensityMapCenterFrequency	double	nan Hz	Center frequency of medium power density sampling or integration
visualizer.mediumVisualizer.powerDensityMapBandwidth	double	0 Hz	Bandwidth of medium power density integration, 0 means sampling, inf means total integrated power
visualizer.mediumVisualizer.powerDensityMapFigureWidth	double	200	Plot figure width in pixels
visualizer.mediumVisualizer.powerDensityMapFigureHeight	double	120	Plot figure height in pixels
visualizer.mediumVisualizer.powerDensityMapPixmapWidth	double	powerDensityMapFigureWidth	Pixmap resolution width
visualizer.mediumVisualizer.powerDensityMapPixmapHeight	double	powerDensityMapFigureHeight	Pixmap resolution height
visualizer.mediumVisualizer.powerDensityMapZ	double	0	Z coordinate
visualizer.mediumVisualizer.powerDensityMapFigureXTickCount	int	3	Number of ticks along the X-axis
visualizer.mediumVisualizer.powerDensityMapFigureYTickCount	int	3	Number of ticks along the Y-axis
visualizer.mediumVisualizer.displaySpectrums	bool	false	Display power spectral density at the nodes, can be enabled with dimensional analog models only
visualizer.mediumVisualizer.spectrumMode	string	“auto”	Total means total transmission medium, signal means transmitted or received signal, auto means total or signal and noise if transmission or reception is in progress
visualizer.mediumVisualizer.spectrumFigureWidth	double	200	Plot figure width in pixels
visualizer.mediumVisualizer.spectrumFigureHeight	double	120	Plot figure height in pixels
visualizer.mediumVisualizer.spectrumFigureXTickCount	int	3	Number of ticks along the X-axis
visualizer.mediumVisualizer.spectrumFigureYTickCount	int	5	Number of ticks along the Y-axis
visualizer.mediumVisualizer.spectrumFigureInterpolationSize	double	5	Power spectrum density interpolation distance along the frequency axis
visualizer.mediumVisualizer.spectrumPlacementHint	string	“bottomCenter”	Annotation placement hint, space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.mediumVisualizer.spectrumPlacementPriority	double	-1	Determines the order of annotation positioning
visualizer.mediumVisualizer.displaySpectrograms	bool	false	Display power density spectrograms at the nodes, can be enabled with dimensional analog models only
visualizer.mediumVisualizer.spectrogramMode	string	“auto”	Total means total transmission medium, signal means transmitted or received signal, auto means total or signal and noise if transmission or reception is in progress
visualizer.mediumVisualizer.spectrogramPixelMode	string	“mean”	Specifies the method used to determine the color of each pixel, sample method is the least accurate but the fastest (sample < partition < mean)
visualizer.mediumVisualizer.spectrogramFigureWidth	double	200	Plot figure width in pixels
visualizer.mediumVisualizer.spectrogramFigureHeight	double	120	Plot figure height in pixels
visualizer.mediumVisualizer.spectrogramPixmapWidth	double	spectrogramFigureWidth	Pixmap resolution width
visualizer.mediumVisualizer.spectrogramPixmapHeight	double	spectrogramFigureHeight	Pixmap resolution height
visualizer.mediumVisualizer.spectrogramFigureXTickCount	int	3	Number of ticks along the X-axis
visualizer.mediumVisualizer.spectrogramFigureYTickCount	int	5	Number of ticks along the Y-axis
visualizer.mediumVisualizer.spectrogramPlacementHint	string	“bottomCenter”	Annotation placement hint, space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.mediumVisualizer.spectrogramPlacementPriority	double	-1	Determines the order of annotation positioning
visualizer.mediumVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.mediumVisualizer.signalShape	string	“ring”	Shape for displaying signals
visualizer.mediumVisualizer.signalOpacity	double	0.5	Signal opacity, value must be in the range [0, 1]
visualizer.mediumVisualizer.signalRingCount	int	20	Number of stationary rings around the transmitter, value must be in the range [0, +inf)
visualizer.mediumVisualizer.signalRingSize	double	50m	Width of stationary rings, value must be in the range (0, +inf)
visualizer.mediumVisualizer.signalFadingDistance	double	50m	Distance parameter for exponential opacity decreasing, value must be in the range (0, +inf)
visualizer.mediumVisualizer.signalFadingFactor	double	1.2	Factor parameter for exponential opacity decreasing, value must be in the range (1, +inf)
visualizer.mediumVisualizer.signalWaveCount	int	20	Number of moving circles representing waves around the transmitter, value must be in the range [0, +inf)
visualizer.mediumVisualizer.signalWaveLength	double	50m	Distance between moving circles representing waves, value must be in the range (0, +inf)
visualizer.mediumVisualizer.signalWaveWidth	double	10m	Width of moving circles representing waves, value must be in the range (0, +inf)
visualizer.mediumVisualizer.signalWaveFadingAnimationSpeedFactor	double	1	Value must be in the range [0, 1]
visualizer.mediumVisualizer.displayCommunicationHeat	bool	false	When enabled the radio medium displays recent successful receptions as a heat map overlay
visualizer.obstacleLossVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.obstacleLossVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.obstacleLossVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.obstacleLossVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.obstacleLossVisualizer.displayIntersections	bool	false	Display intersections of transmissions and physical objects, disabled by default
visualizer.obstacleLossVisualizer.intersectionLineColor	string	“red”
visualizer.obstacleLossVisualizer.intersectionLineStyle	string	“solid”
visualizer.obstacleLossVisualizer.intersectionLineWidth	double	1
visualizer.obstacleLossVisualizer.displayFaceNormalVectors	bool	false	Display face normal vectors of intersections, disabled by default
visualizer.obstacleLossVisualizer.faceNormalLineColor	string	“grey”
visualizer.obstacleLossVisualizer.faceNormalLineStyle	string	“solid”
visualizer.obstacleLossVisualizer.faceNormalLineWidth	double	1
visualizer.obstacleLossVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive obstacle losses fade out
visualizer.obstacleLossVisualizer.fadeOutTime	double	1s	How quickly link breaks fade away, 1 second by default
visualizer.obstacleLossVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are obstacle losses, value must be in the range (0, +inf)
visualizer.obstacleLossVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.packetDropVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.packetDropVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.packetDropVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.packetDropVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.packetDropVisualizer.displayPacketDrops	bool	false	Display packet drops, disabled by default
visualizer.packetDropVisualizer.nodeFilter	string	“*”	Which network nodes are considered, matches all network nodes by default
visualizer.packetDropVisualizer.interfaceFilter	string	“*”	Which network interfaces are considered, matches all network interfaces by default
visualizer.packetDropVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.packetDropVisualizer.detailsFilter	string	“*”	Which packet drops are considered, matches all packet drops by default
visualizer.packetDropVisualizer.icon	string	“msg/packet_s”	Packet drop visualization icon
visualizer.packetDropVisualizer.iconTintAmount	double	1	Colorization amount between 0 and 1, enabled by default
visualizer.packetDropVisualizer.iconTintColor	string	“dark”	Icon tint color is a list of colors, a set of dark colors by default
visualizer.packetDropVisualizer.labelFormat	string	“%n”	Determines what data is displayed in the label, packet name by default
visualizer.packetDropVisualizer.labelFont	string	“<default>”	Label font, automatic by default
visualizer.packetDropVisualizer.labelColor	string	“black”	Label color, black by default
visualizer.packetDropVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive packet drops fade out, real time by default
visualizer.packetDropVisualizer.fadeOutTime	double	1s	How quickly packet drops fade away, 1 second by default
visualizer.packetDropVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are packet drops, value must be in the range (0, +inf), disabled by default
visualizer.packetDropVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.packetDropVisualizer.dx	double	32	Specifies how far the animation turns over along the X axis
visualizer.packetDropVisualizer.dy	double	64	Specifies how far the animation turns over along the Y axis
visualizer.packetFlowVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.packetFlowVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.packetFlowVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.packetFlowVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.packetFlowVisualizer.displayRoutes	bool	false	Display polyline arrow for active routes, disabled by default
visualizer.packetFlowVisualizer.startPathSignal	string	“packetFlowStarted”
visualizer.packetFlowVisualizer.extendPathSignal	string	“packetReceivedFromLower”
visualizer.packetFlowVisualizer.endPathSignal	string	“packetFlowEnded”
visualizer.packetFlowVisualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.packetFlowVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.packetFlowVisualizer.lineColor	string	“dark”	Route color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.packetFlowVisualizer.lineStyle	string	“dashed”	Route line style (solid, dashed, dotted)
visualizer.packetFlowVisualizer.lineWidth	double	3	Route line width
visualizer.packetFlowVisualizer.lineSmooth	bool	false	When true polylines are displayed as curves
visualizer.packetFlowVisualizer.lineShift	double	16	Route line shift to avoid overlapping routes
visualizer.packetFlowVisualizer.lineShiftMode	string	“normal”	Determines how overlapping lines are shifted, possible values are: normal, x, y, z; optional prefix + or -
visualizer.packetFlowVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.packetFlowVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.packetFlowVisualizer.labelFormat	string	“%L %p pk (%l)”	Determines what path data is displayed
visualizer.packetFlowVisualizer.labelFont	string	“<default>, 8px”	Label font, automatic by default
visualizer.packetFlowVisualizer.labelColor	string	“”	Label color, same as line by default
visualizer.packetFlowVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive routes fade out
visualizer.packetFlowVisualizer.fadeOutTime	double	0s	How quickly inactive routes fade away, 1 second by default
visualizer.packetFlowVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are active routes, value must be in the range (0, +inf)
visualizer.packetFlowVisualizer.zIndex	double	4	Determines the drawing order of figures relative to other visualizers
visualizer.queueVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.queueVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.queueVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.queueVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.queueVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	Module path to the network node visualizer module, refers to a sibling submodule by default
visualizer.queueVisualizer.displayQueues	bool	false
visualizer.queueVisualizer.queueFilter	string	“**”	Which queues are considered, matches all queues by default
visualizer.queueVisualizer.color	string	“blue”
visualizer.queueVisualizer.width	double	8
visualizer.queueVisualizer.height	double	24
visualizer.queueVisualizer.spacing	double	2
visualizer.queueVisualizer.placementHint	string	“right”	Annotation placement hint, space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.queueVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.queueVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.gateScheduleVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.gateScheduleVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.gateScheduleVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.gateScheduleVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.gateScheduleVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	Module path to the network node visualizer module, refers to a sibling submodule by default
visualizer.gateScheduleVisualizer.displayGateSchedules	bool	false
visualizer.gateScheduleVisualizer.labelFormat	string	“%i %D”
visualizer.gateScheduleVisualizer.gateFilter	string	“**”	Which gates are considered, matches all gates by default
visualizer.gateScheduleVisualizer.width	double	100
visualizer.gateScheduleVisualizer.height	double	8
visualizer.gateScheduleVisualizer.spacing	double	2
visualizer.gateScheduleVisualizer.placementHint	string	“right”	Annotation placement hint, space separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.gateScheduleVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.gateScheduleVisualizer.displayDuration	double	0s	Gate operation time duration visualized in the amount of space available, use gate period by default
visualizer.gateScheduleVisualizer.currentTimePosition	double	width / 2	Position of the current simulation time in the visualization, horizontally centered by default
visualizer.gateScheduleVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.radioVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.radioVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.radioVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.radioVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.radioVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	Module path to the network node visualizer module, refers to a sibling submodule by default
visualizer.radioVisualizer.displayRadios	bool	false
visualizer.radioVisualizer.displayRadioMode	bool	true
visualizer.radioVisualizer.displayReceptionState	bool	true
visualizer.radioVisualizer.displayTransmissionState	bool	true
visualizer.radioVisualizer.displayAntennaLobes	bool	false
visualizer.radioVisualizer.radioFilter	string	“**”	Which radios are considered, matches all radios by default
visualizer.radioVisualizer.radioModeImages	string	“block/process_vs block/timer_vs block/wrx_vs block/wtx_vs block/wrxtx_vs block/cogwheel_vs”
visualizer.radioVisualizer.receptionStateImages	string	“- - misc/receiving misc/receiving”
visualizer.radioVisualizer.transmissionStateImages	string	“- - misc/transmitting”
visualizer.radioVisualizer.width	double	16
visualizer.radioVisualizer.height	double	16
visualizer.radioVisualizer.placementHint	string	“bottomRight”	Annotation placement hint, space separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.radioVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.radioVisualizer.antennaLobeNormalize	bool	false	True means maximum gain, false means 0dB is displayed at the given antennaLobeRadius
visualizer.radioVisualizer.antennaLobeRelativeLabels	bool	false	Determines whether gain labels are relative or absolute (if true, maximum gain label is 0dB)
visualizer.radioVisualizer.antennaLobePlaneGlobal	bool	true	Compute antenna lobe relative to the global or antenna local coordinate systems, global by default
visualizer.radioVisualizer.antennaLobePlane	string	“view”	Compute antenna lobe in this plane, view by default
visualizer.radioVisualizer.antennaLobeMode	string	“logarithmic”
visualizer.radioVisualizer.antennaLobeLogarithmicBase	double	10
visualizer.radioVisualizer.antennaLobeLogarithmicScale	double	100	Distance change in pixels for 10dB
visualizer.radioVisualizer.antennaLobeRadius	double	100	Distance in pixels for 0dB (1 gain) or maximum gain depending on antennaLobeNormalize parameter
visualizer.radioVisualizer.antennaLobeStep	double	10deg
visualizer.radioVisualizer.antennaLobeOpacity	double	0.25	Opacity of the antenna lobe
visualizer.radioVisualizer.antennaLobeLineSmooth	bool	true
visualizer.radioVisualizer.antennaLobeLineColor	string	“black”	Antenna lobe line color, black by default
visualizer.radioVisualizer.antennaLobeLineStyle	string	“solid”	Antenna lobe line style (solid, dashed, dotted)
visualizer.radioVisualizer.antennaLobeLineWidth	double	1	Antenna lobe line width
visualizer.radioVisualizer.antennaLobeFillColor	string	“white”	Antenna lobe fill color, white by default
visualizer.radioVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.physicalLinkVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.physicalLinkVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.physicalLinkVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.physicalLinkVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.physicalLinkVisualizer.displayLinks	bool	false	Display arrows for active links, disabled by default
visualizer.physicalLinkVisualizer.activityLevel	string	“service”	Determines what level of activity is displayed, service level by default
visualizer.physicalLinkVisualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.physicalLinkVisualizer.interfaceFilter	string	“*”	Which interfaces are considered, matches all interfaces by default
visualizer.physicalLinkVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.physicalLinkVisualizer.lineColor	string	“olive”	Link arrow color, black by default
visualizer.physicalLinkVisualizer.lineStyle	string	“dotted”	Link arrow style (solid, dashed, dotted)
visualizer.physicalLinkVisualizer.lineWidth	double	3	Link arrow width
visualizer.physicalLinkVisualizer.lineShift	double	16	Line shift to avoid overlapping arrows
visualizer.physicalLinkVisualizer.lineShiftMode	string	“normal”	Determines how overlapping arrows are shifted, possible values are: none, normal, x, y, z; optional prefix + or -
visualizer.physicalLinkVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.physicalLinkVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.physicalLinkVisualizer.labelFormat	string	“%n”	Determines what link data is displayed
visualizer.physicalLinkVisualizer.labelFont	string	“<default>, 8px”	Label font, automatic by default
visualizer.physicalLinkVisualizer.labelColor	string	“olive”	Label color, black by default
visualizer.physicalLinkVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive links fade out
visualizer.physicalLinkVisualizer.fadeOutTime	double	1s	How quickly inactive links fade away, 1 second by default
visualizer.physicalLinkVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are active links, value must be in the range (0, +inf)
visualizer.physicalLinkVisualizer.holdAnimationTime	double	0s	Hold simulation (no progress) for the specified amount of animation time when the link is activated
visualizer.physicalLinkVisualizer.zIndex	double	1	Determines the drawing order of figures relative to other visualizers
visualizer.interfaceTableVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.interfaceTableVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.interfaceTableVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.interfaceTableVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.interfaceTableVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	Module path to the network node visualizer module, refers to a sibling submodule by default
visualizer.interfaceTableVisualizer.displayInterfaceTables	bool	false	Display interface table data, disabled by default
visualizer.interfaceTableVisualizer.displayWiredInterfacesAtConnections	bool	true	Specifies where wired interfaces are displayed
visualizer.interfaceTableVisualizer.displayBackground	bool	false	Specifies whether the text should have a background or not
visualizer.interfaceTableVisualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.interfaceTableVisualizer.interfaceFilter	string	“not(lo*)”	Which interfaces are considered, matches all non-local interfaces by default
visualizer.interfaceTableVisualizer.format	string	“%N %\\%a%/%l”	Determines what interface data is displayed
visualizer.interfaceTableVisualizer.placementHint	string	“top”	Annotation placement hint, space separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.interfaceTableVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.interfaceTableVisualizer.font	string	“<default>”	Interface text font, automatic by default
visualizer.interfaceTableVisualizer.textColor	string	“#005030”	Interface text font color
visualizer.interfaceTableVisualizer.backgroundColor	string	“white”	Interface text background color
visualizer.interfaceTableVisualizer.opacity	double	1.0	Opacity of the visualization
visualizer.interfaceTableVisualizer.zIndex	double	10	Determines the drawing order of figures relative to other visualizers
visualizer.interfaceTableVisualizer.anchor	string	“l”	Specifies the beginning/end/middle
visualizer.dataLinkVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.dataLinkVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.dataLinkVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.dataLinkVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.dataLinkVisualizer.displayLinks	bool	false	Display arrows for active links, disabled by default
visualizer.dataLinkVisualizer.activityLevel	string	“service”	Determines what level of activity is displayed, service level by default
visualizer.dataLinkVisualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.dataLinkVisualizer.interfaceFilter	string	“*”	Which interfaces are considered, matches all interfaces by default
visualizer.dataLinkVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.dataLinkVisualizer.lineColor	string	“darkcyan”	Link arrow color, black by default
visualizer.dataLinkVisualizer.lineStyle	string	“solid”	Link arrow style (solid, dashed, dotted)
visualizer.dataLinkVisualizer.lineWidth	double	3	Link arrow width
visualizer.dataLinkVisualizer.lineShift	double	16	Line shift to avoid overlapping arrows
visualizer.dataLinkVisualizer.lineShiftMode	string	“normal”	Determines how overlapping arrows are shifted, possible values are: none, normal, x, y, z; optional prefix + or -
visualizer.dataLinkVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.dataLinkVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.dataLinkVisualizer.labelFormat	string	“%n”	Determines what link data is displayed
visualizer.dataLinkVisualizer.labelFont	string	“<default>, 8px”	Label font, automatic by default
visualizer.dataLinkVisualizer.labelColor	string	“darkcyan”	Label color, black by default
visualizer.dataLinkVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive links fade out
visualizer.dataLinkVisualizer.fadeOutTime	double	1s	How quickly inactive links fade away, 1 second by default
visualizer.dataLinkVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are active links, value must be in the range (0, +inf)
visualizer.dataLinkVisualizer.holdAnimationTime	double	0s	Hold simulation (no progress) for the specified amount of animation time when the link is activated
visualizer.dataLinkVisualizer.zIndex	double	2	Determines the drawing order of figures relative to other visualizers
visualizer.linkBreakVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.linkBreakVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.linkBreakVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.linkBreakVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.linkBreakVisualizer.displayLinkBreaks	bool	false	Display icons for link breaks, disabled by default
visualizer.linkBreakVisualizer.nodeFilter	string	“*”	Which network nodes are considered, matches all nodes by default
visualizer.linkBreakVisualizer.interfaceFilter	string	“*”	Which interfaces are considered, matches all interfaces by default
visualizer.linkBreakVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.linkBreakVisualizer.icon	string	“status/stop”
visualizer.linkBreakVisualizer.iconTintAmount	double	0
visualizer.linkBreakVisualizer.iconTintColor	string	“”
visualizer.linkBreakVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive link breaks fade out
visualizer.linkBreakVisualizer.fadeOutTime	double	1s	How quickly link breaks fade away, 1 second by default
visualizer.linkBreakVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are link breaks, value must be in the range (0, +inf)
visualizer.linkBreakVisualizer.zIndex	double	2	Determines the drawing order of figures relative to other visualizers
visualizer.ieee80211Visualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.ieee80211Visualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.ieee80211Visualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.ieee80211Visualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.ieee80211Visualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	Module path to the network node visualizer module, refers to a sibling submodule by default
visualizer.ieee80211Visualizer.displayAssociations	bool	false	Display association icon and SSID, disabled by default
visualizer.ieee80211Visualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.ieee80211Visualizer.interfaceFilter	string	“*”	Which interfaces are considered, matches all interfaces by default
visualizer.ieee80211Visualizer.minPower	double	-85dBm	Minimum expected signal power
visualizer.ieee80211Visualizer.maxPower	double	-50dBm	Maximum expected signal power
visualizer.ieee80211Visualizer.icons	string	“misc/signal_power_0 misc/signal_power_1 misc/signal_power_2 misc/signal_power_3”	Wireless network visualization icon for different signal powers
visualizer.ieee80211Visualizer.iconColor	string	“dark”	Wireless network icon color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.ieee80211Visualizer.labelFont	string	“<default>”	Label font, automatic by default
visualizer.ieee80211Visualizer.labelColor	string	“black”	Label color, black by default
visualizer.ieee80211Visualizer.placementHint	string	“top”	Annotation placement hint, space-separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.ieee80211Visualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.ieee80211Visualizer.zIndex	double	2	Determines the drawing order of figures relative to other visualizers
visualizer.networkRouteVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.networkRouteVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.networkRouteVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.networkRouteVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.networkRouteVisualizer.displayRoutes	bool	false	Display polyline arrow for active routes, disabled by default
visualizer.networkRouteVisualizer.startPathSignal	string	“packetReceivedFromUpper”
visualizer.networkRouteVisualizer.extendPathSignal	string	“packetReceivedFromLower”
visualizer.networkRouteVisualizer.endPathSignal	string	“packetSentToUpper”
visualizer.networkRouteVisualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.networkRouteVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.networkRouteVisualizer.lineColor	string	“dark”	Route color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.networkRouteVisualizer.lineStyle	string	“solid”	Route line style (solid, dashed, dotted)
visualizer.networkRouteVisualizer.lineWidth	double	3	Route line width
visualizer.networkRouteVisualizer.lineSmooth	bool	false	When true polylines are displayed as curves
visualizer.networkRouteVisualizer.lineShift	double	16	Route line shift to avoid overlapping routes
visualizer.networkRouteVisualizer.lineShiftMode	string	“normal”	Determines how overlapping lines are shifted, possible values are: normal, x, y, z; optional prefix + or -
visualizer.networkRouteVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.networkRouteVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.networkRouteVisualizer.labelFormat	string	“%n”	Determines what path data is displayed
visualizer.networkRouteVisualizer.labelFont	string	“<default>, 8px”	Label font, automatic by default
visualizer.networkRouteVisualizer.labelColor	string	“”	Label color, same as line by default
visualizer.networkRouteVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive routes fade out
visualizer.networkRouteVisualizer.fadeOutTime	double	1s	How quickly inactive routes fade away, 1 second by default
visualizer.networkRouteVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are active routes, value must be in the range (0, +inf)
visualizer.networkRouteVisualizer.zIndex	double	3	Determines the drawing order of figures relative to other visualizers
visualizer.routingTableVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.routingTableVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.routingTableVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.routingTableVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.routingTableVisualizer.displayRoutingTables	bool	false	Displays routing table data, disabled by default
visualizer.routingTableVisualizer.displayRoutesIndividually	bool	true	Displays routes between the same network nodes individually, enabled by default
visualizer.routingTableVisualizer.displayLabels	bool	true	Displays labels on arrows, enabled by default
visualizer.routingTableVisualizer.destinationFilter	string	“*”	Determines the destinations that are considered, matches all destinations by default
visualizer.routingTableVisualizer.nodeFilter	string	“*”	Determines the nodes that are considered, matches all nodes by default
visualizer.routingTableVisualizer.multicastSourceNodeFilter	string	“*”	Determines the multicast source nodes that are considered, matches all nodes by default
visualizer.routingTableVisualizer.multicastSourceAddressFilter	string	“*”	Determines the multicast source addresses that are considered, matches all addresses by default
visualizer.routingTableVisualizer.multicastGroupFilter	string	“*”	Determines the multicast group addresses that are considered, matches all group addresses by default
visualizer.routingTableVisualizer.lineColor	string	“black”	Route line color, black by default
visualizer.routingTableVisualizer.lineStyle	string	“solid”	Route line style (solid, dashed, dotted)
visualizer.routingTableVisualizer.lineWidth	double	2	Route line width
visualizer.routingTableVisualizer.lineShift	double	16	Line shift to avoid overlapping lines
visualizer.routingTableVisualizer.lineShiftMode	string	“normal”	Determines how overlapping lines are shifted, possible values are: none, normal, x, y, z; optional prefix + or -
visualizer.routingTableVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.routingTableVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.routingTableVisualizer.labelFormat	string	“%d/%m -> %g (%n)”	Determines what route data is displayed
visualizer.routingTableVisualizer.labelFont	string	“<default>, 8px”	Label font, automatic by default
visualizer.routingTableVisualizer.labelColor	string	“black”	Label color, black by default
visualizer.routingTableVisualizer.zIndex	double	0	Determines the drawing order of figures relative to other visualizers
visualizer.transportRouteVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.transportRouteVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.transportRouteVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.transportRouteVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.transportRouteVisualizer.displayRoutes	bool	false	Display polyline arrow for active routes, disabled by default
visualizer.transportRouteVisualizer.startPathSignal	string	“packetReceivedFromUpper”
visualizer.transportRouteVisualizer.extendPathSignal	string	“packetReceivedFromLower”
visualizer.transportRouteVisualizer.endPathSignal	string	“packetSentToUpper”
visualizer.transportRouteVisualizer.nodeFilter	string	“*”	Which nodes are considered, matches all nodes by default
visualizer.transportRouteVisualizer.packetFilter	object	“*”	Which packets are considered, matches all packets by default
visualizer.transportRouteVisualizer.lineColor	string	“dark”	Route color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.transportRouteVisualizer.lineStyle	string	“solid”	Route line style (solid, dashed, dotted)
visualizer.transportRouteVisualizer.lineWidth	double	3	Route line width
visualizer.transportRouteVisualizer.lineSmooth	bool	false	When true polylines are displayed as curves
visualizer.transportRouteVisualizer.lineShift	double	16	Route line shift to avoid overlapping routes
visualizer.transportRouteVisualizer.lineShiftMode	string	“normal”	Determines how overlapping lines are shifted, possible values are: normal, x, y, z; optional prefix + or -
visualizer.transportRouteVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.transportRouteVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.transportRouteVisualizer.labelFormat	string	“%n”	Determines what path data is displayed
visualizer.transportRouteVisualizer.labelFont	string	“<default>, 8px”	Label font, automatic by default
visualizer.transportRouteVisualizer.labelColor	string	“”	Label color, same as line by default
visualizer.transportRouteVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive routes fade out
visualizer.transportRouteVisualizer.fadeOutTime	double	1s	How quickly inactive routes fade away, 1 second by default
visualizer.transportRouteVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are active routes, value must be in the range (0, +inf)
visualizer.transportRouteVisualizer.zIndex	double	4	Determines the drawing order of figures relative to other visualizers
visualizer.transportConnectionVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.transportConnectionVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.transportConnectionVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.transportConnectionVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.transportConnectionVisualizer.networkNodeVisualizerModule	string	“^.networkNodeVisualizer”	The network node visualizer module, refers to a sibling submodule by default
visualizer.transportConnectionVisualizer.displayTransportConnections	bool	false	display transport connection endpoints, disabled by default
visualizer.transportConnectionVisualizer.sourceNodeFilter	string	“*”	Which source network nodes are considered to display connections, matches no nodes by default
visualizer.transportConnectionVisualizer.sourcePortFilter	string	“*”	Which source ports are considered to display connections, matches all ports by default
visualizer.transportConnectionVisualizer.destinationNodeFilter	string	“*”	Which destination network nodes are considered to display connections, matches no nodes by default
visualizer.transportConnectionVisualizer.destinationPortFilter	string	“*”	Which destination ports are considered to display connections, matches all ports by default
visualizer.transportConnectionVisualizer.icon	string	“misc/marker_s”	Transport connection visualization icon
visualizer.transportConnectionVisualizer.iconColor	string	“dark”	Transport connection icon color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.transportConnectionVisualizer.labelFont	string	“<default>”	Label font, automatic by default
visualizer.transportConnectionVisualizer.labelColor	string	“black”	Label color, black by default
visualizer.transportConnectionVisualizer.placementHint	string	“top”	Annotation placement hint, space separated list of any, top, bottom, left, right, topLeft, topCenter, topRight, etc.
visualizer.transportConnectionVisualizer.placementPriority	double	0	Determines the order of annotation positioning
visualizer.transportConnectionVisualizer.zIndex	double	4	Determines the drawing order of figures relative to other visualizers
visualizer.failureProtectionConfigurationVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.failureProtectionConfigurationVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.failureProtectionConfigurationVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.failureProtectionConfigurationVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.failureProtectionConfigurationVisualizer.displayTrees	bool	false	Display a set of polyline arrows for trees, disabled by default
visualizer.failureProtectionConfigurationVisualizer.lineColor	string	“dark”	Line color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.failureProtectionConfigurationVisualizer.lineStyle	string	“solid”	Line style (solid, dashed, dotted)
visualizer.failureProtectionConfigurationVisualizer.lineWidth	double	3	Line width
visualizer.failureProtectionConfigurationVisualizer.lineSmooth	bool	false	When true polylines are displayed as curves
visualizer.failureProtectionConfigurationVisualizer.lineShift	double	16	Line shift to avoid overlapping lines
visualizer.failureProtectionConfigurationVisualizer.lineShiftMode	string	“normal”	Determines how overlapping lines are shifted, possible values are: normal, x, y, z; optional prefix + or -
visualizer.failureProtectionConfigurationVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.failureProtectionConfigurationVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.failureProtectionConfigurationVisualizer.failureProtectionConfiguratorModule	string	“failureProtectionConfigurator”
visualizer.failureProtectionConfigurationVisualizer.streamFilter	string	“*”
visualizer.failureProtectionConfigurationVisualizer.zIndex	double	3	Determines the drawing order of figures relative to other visualizers
visualizer.streamRedundancyConfigurationVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.streamRedundancyConfigurationVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.streamRedundancyConfigurationVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.streamRedundancyConfigurationVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.streamRedundancyConfigurationVisualizer.displayTrees	bool	false	Display a set of polyline arrows for trees, disabled by default
visualizer.streamRedundancyConfigurationVisualizer.lineColor	string	“dark”	Line color is a list of colors or a color group name (e.g. dark, light), a set of dark colors by default
visualizer.streamRedundancyConfigurationVisualizer.lineStyle	string	“solid”	Line style (solid, dashed, dotted)
visualizer.streamRedundancyConfigurationVisualizer.lineWidth	double	3	Line width
visualizer.streamRedundancyConfigurationVisualizer.lineSmooth	bool	false	When true polylines are displayed as curves
visualizer.streamRedundancyConfigurationVisualizer.lineShift	double	16	Line shift to avoid overlapping lines
visualizer.streamRedundancyConfigurationVisualizer.lineShiftMode	string	“normal”	Determines how overlapping lines are shifted, possible values are: normal, x, y, z; optional prefix + or -
visualizer.streamRedundancyConfigurationVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon
visualizer.streamRedundancyConfigurationVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules
visualizer.streamRedundancyConfigurationVisualizer.streamRedundancyConfiguratorModule	string	“streamRedundancyConfigurator”
visualizer.streamRedundancyConfigurationVisualizer.streamFilter	string	“*”
visualizer.streamRedundancyConfigurationVisualizer.zIndex	double	3	Determines the drawing order of figures relative to other visualizers
visualizer.channelVisualizer.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
visualizer.channelVisualizer.visualizationTargetModule	string	“^”	Module path relative to the visualizer which determines where the visualization should appear in the user interface, parent module by default
visualizer.channelVisualizer.visualizationSubjectModule	string	“^”	Module path relative to the visualizer which determines what part of the simulation model the visualizer displays in the user interface, parent module by default
visualizer.channelVisualizer.tags	string	“”	Tag added to each visualization for disambiguation in the runtime environment
visualizer.channelVisualizer.displayChannelActivity	bool	false	Display arrows for active channels. Disabled by default.
visualizer.channelVisualizer.nodeFilter	string	“*”	Which nodes are considered. Matches all nodes by default.
visualizer.channelVisualizer.packetFilter	object	“*”	Which packets are considered. Matches all packets by default.
visualizer.channelVisualizer.lineColor	string	“blue”	Arrow color. Black by default.
visualizer.channelVisualizer.lineStyle	string	“solid”	Arrow style (solid, dashed, dotted).
visualizer.channelVisualizer.lineWidth	double	3	Arrow width.
visualizer.channelVisualizer.lineShift	double	16	Line shift to avoid overlapping arrows.
visualizer.channelVisualizer.lineShiftMode	string	“normal”	Determines how overlapping arrows are shifted. Possible values are: none, normal, x, y, z; optional prefix + or -.
visualizer.channelVisualizer.lineContactSpacing	double	3	Spacing between arrow end and submodule icon.
visualizer.channelVisualizer.lineContactMode	string	“rectangular”	Determines how arrows are clipped at the submodules.
visualizer.channelVisualizer.labelFormat	string	“%n”	Determines what data is displayed.
visualizer.channelVisualizer.labelFont	string	“<default>, 8px”	Label font. Automatic by default.
visualizer.channelVisualizer.labelColor	string	“blue”	Label color. Black by default.
visualizer.channelVisualizer.fadeOutMode	string	“realTime”	Specifies how inactive channels fade out.
visualizer.channelVisualizer.fadeOutTime	double	1s	How quickly inactive channels fade away. 1 second by default.
visualizer.channelVisualizer.fadeOutAnimationSpeed	double	0	Animation speed while there are active channels. Value must be in the range (0, +inf).
visualizer.channelVisualizer.holdAnimationTime	double	0s	Hold simulation (no progress) for the specified amount of animation time when the channel is activated.
visualizer.channelVisualizer.zIndex	double	1	Determines the drawing order of figures relative to other visualizers.
visualizer.geoMapVisualizer.visualizationTargetModule	string
visualizer.geoMapVisualizer.visualizationSubjectModule	string
visualizer.geoSkyViewVisualizer.visualizationTargetModule	string
visualizer.geoSkyViewVisualizer.visualizationSubjectModule	string
visualizer.geoHorizonVisualizer.visualizationTargetModule	string
visualizer.geoHorizonVisualizer.visualizationSubjectModule	string
visualizer.geoHorizonVisualizer.mapVisualizer	string
configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
configurator.minLinkWeight	double	1E-3
configurator.configureIsolatedNetworksSeparatly	bool	false
configurator.config	xml	xml(“<config><interface hosts=’**’ address=’10.x.x.x’ netmask=’255.x.x.x’/></config>”)	XML configuration parameters for IP address assignment and adding manual routes
configurator.assignAddresses	bool	true	Assign IP addresses to all interfaces in the network
configurator.assignUniqueAddresses	bool	true	Avoid using the same address and raise an error if not possible
configurator.assignDisjunctSubnetAddresses	bool	true	Avoid using the same address prefix and netmask on different links when assigning IP addresses to interfaces
configurator.addStaticRoutes	bool	true	Add static routes to the routing tables of all nodes to route to all destination interfaces (only where applicable; turn off when config file contains manual routes)
configurator.addDefaultRoutes	bool	true	Add default routes if all routes from a source node go through the same gateway (used only if addStaticRoutes is true)
configurator.addSubnetRoutes	bool	true	Add subnet routes instead of destination interface routes (only where applicable; used only if addStaticRoutes is true)
configurator.addDirectRoutes	bool	true	Add direct routes towards local network members (i.e. directly connected interfaces) to the routing table (used only if addStaticRoutes is true)
configurator.addRemoteRoutes	bool	true	Add routes towards remote (non-directly-connected) destinations via a gateway (used only if addStaticRoutes is true)
configurator.optimizeRoutes	bool	true	Optimize routing tables by merging routes, the resulting routing table might route more packets than the original (used only if addStaticRoutes is true)
configurator.addManualRoutes	bool	true	Add manual routes from the XML configuration; independent of addStaticRoutes
configurator.updateRoutes	bool	false	Recalculate static routes if an interface goes down/up or a carrier is lost/back
configurator.dumpTopology	bool	false	Print extracted network topology to the module output
configurator.dumpLinks	bool	false	Print recognized network links to the module output
configurator.dumpAddresses	bool	false	Print assigned IP addresses for all interfaces to the module output
configurator.dumpRoutes	bool	false	Print configured and optimized routing tables for all nodes to the module output
configurator.dumpConfig	string	“”	Write configuration into the given config file that can be fed back to speed up subsequent runs (network configurations)
moduleDump.modulePath	string	“^”
moduleDump.fileName	string	“”
moduleDump.time	double	0
moduleDump.printClassNames	bool	false
moduleDump.printProperties	bool	false
moduleDump.printParamAssignmentLocations	bool	false
macForwardingTableConfigurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.status.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.status.initialStatus	string	“UP”	Initial status of the network node
client1.environment.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.environment.initStage	int	0	Initialization stage for the setup command
client1.environment.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
client1.environment.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
client1.environment.setupCommand	string	“”	A host OS system command
client1.environment.teardownCommand	string	“”	A host OS system command
client1.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client1.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client1.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client1.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client1.pcapRecorder.fileFormat	string	“pcapng”
client1.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client1.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client1.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client1.pcapRecorder.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
client1.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client1.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client1.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client1.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client1.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client1.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client1.interfaceTable.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.interfaceTable.displayAddresses	bool	false	Whether to display IP addresses on links
client1.cb.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.cb.interfaceTableModule	string		Module path to the InterfaceTable module
client1.cb.forwardServiceRegistration	bool	true
client1.cb.forwardProtocolRegistration	bool	true
client1.cb.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.cb.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.cb.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.bl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.bl.interfaceTableModule	string		Module path to the InterfaceTable module
client1.bl.forwardServiceRegistration	bool	true
client1.bl.forwardProtocolRegistration	bool	true
client1.bl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.bl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.bl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.ethernet.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ethernet.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
client1.ethernet.interfaceTableModule	string		The path to the InterfaceTable module
client1.ethernet.fcsMode	string	“declared”
client1.ethernet.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
client1.ethernet.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
client1.li.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.li.interfaceTableModule	string		Module path to the InterfaceTable module
client1.li.forwardServiceRegistration	bool	true
client1.li.forwardProtocolRegistration	bool	true
client1.li.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.li.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.li.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.lo.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.lo.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client1.lo.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client1.lo.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client1.lo.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client1.lo.pcapRecorder.fileFormat	string	“pcapng”
client1.lo.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client1.lo.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client1.lo.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client1.lo.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client1.lo.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client1.lo.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client1.lo.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client1.lo.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client1.lo.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client1.lo.lo.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.lo.lo.interfaceTableModule	string		The path to the InterfaceTable module
client1.lo.lo.mtu	int	4470B
client1.wlan.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client1.wlan.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client1.wlan.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client1.wlan.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client1.wlan.pcapRecorder.fileFormat	string	“pcapng”
client1.wlan.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client1.wlan.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client1.wlan.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client1.wlan.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client1.wlan.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client1.wlan.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client1.wlan.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client1.wlan.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client1.wlan.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client1.wlan.mib.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.agent.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.agent.interfaceTableModule	string		The path to the InterfaceTable module
client1.wlan.agent.mibModule	string
client1.wlan.agent.activeScan	bool	true	Selects between active and passive scanning
client1.wlan.agent.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
client1.wlan.agent.probeDelay	double	100ms	Delay before sending a probe request during active scanning
client1.wlan.agent.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
client1.wlan.agent.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
client1.wlan.agent.authenticationTimeout	double	5s	Timeout for the authentication procedure
client1.wlan.agent.associationTimeout	double	5s	Timeout for the association procedure
client1.wlan.agent.startingTime	double	-1s	Agent starting time.
client1.wlan.agent.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
client1.wlan.mgmt.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mgmt.interfaceTableModule	string		The path to the InterfaceTable module
client1.wlan.mgmt.numChannels	int	1	Number of channels to scan
client1.wlan.mgmt.mibModule	string
client1.wlan.mgmt.macModule	string		The path to the MAC module
client1.wlan.mac.dcf.channelAccess.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.channelAccess.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
client1.wlan.mac.dcf.channelAccess.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
client1.wlan.mac.dcf.channelAccess.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
client1.wlan.mac.dcf.channelAccess.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
client1.wlan.mac.dcf.channelAccess.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
client1.wlan.mac.dcf.channelAccess.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.channelAccess.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
client1.wlan.mac.dcf.channelAccess.inProgressFrames.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
client1.wlan.mac.dcf.channelAccess.inProgressFrames.ackHandlerModule	string	“^.^.ackHandler”
client1.wlan.mac.dcf.channelAccess.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.channelAccess.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
client1.wlan.mac.dcf.channelAccess.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
client1.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
client1.wlan.mac.dcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.rateSelection.multicastFrameBitrate	double	-1bps
client1.wlan.mac.dcf.rateSelection.responseAckFrameBitrate	double	-1bps
client1.wlan.mac.dcf.rateSelection.responseCtsFrameBitrate	double	-1bps
client1.wlan.mac.dcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
client1.wlan.mac.dcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
client1.wlan.mac.dcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
client1.wlan.mac.dcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
client1.wlan.mac.dcf.rateSelection.controlFrameBitrate	double	-1bps
client1.wlan.mac.dcf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.recoveryProcedure.shortRetryLimit	int	7
client1.wlan.mac.dcf.recoveryProcedure.longRetryLimit	int	4
client1.wlan.mac.dcf.originatorProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.originatorProtectionMechanism.rateSelectionModule	string
client1.wlan.mac.dcf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.originatorAckPolicy.rateSelectionModule	string
client1.wlan.mac.dcf.originatorAckPolicy.ackTimeout	double	-1s
client1.wlan.mac.dcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.recipientAckPolicy.rateSelectionModule	string
client1.wlan.mac.dcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.rtsPolicy.rateSelectionModule	string
client1.wlan.mac.dcf.rtsPolicy.ctsTimeout	double	-1s
client1.wlan.mac.dcf.rtsPolicy.rtsThreshold	int	2346B
client1.wlan.mac.dcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.dcf.ctsPolicy.rxModule	string
client1.wlan.mac.dcf.ctsPolicy.rateSelectionModule	string
client1.wlan.mac.hcf.edca.edcaf.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.edcaf.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
client1.wlan.mac.hcf.edca.edcaf.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
client1.wlan.mac.hcf.edca.edcaf.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
client1.wlan.mac.hcf.edca.edcaf.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
client1.wlan.mac.hcf.edca.edcaf.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
client1.wlan.mac.hcf.edca.edcaf.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.edcaf.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
client1.wlan.mac.hcf.edca.edcaf.inProgressFrames.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
client1.wlan.mac.hcf.edca.edcaf.inProgressFrames.ackHandlerModule	string	“^.ackHandler”
client1.wlan.mac.hcf.edca.edcaf.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.edcaf.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
client1.wlan.mac.hcf.edca.edcaf.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
client1.wlan.mac.hcf.edca.edcaf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.edcaf.txopProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.edcaf.txopProcedure.txopLimit	double	-1s
client1.wlan.mac.hcf.edca.edcaf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.edcaf.recoveryProcedure.shortRetryLimit	int	7
client1.wlan.mac.hcf.edca.edcaf.recoveryProcedure.longRetryLimit	int	4
client1.wlan.mac.hcf.edca.collisionController.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.shortRetryLimit	int	7
client1.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.longRetryLimit	int	4
client1.wlan.mac.hcf.hcca.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
client1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
client1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.maxAMsduSize	int	4065	-1 means infinity
client1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
client1.wlan.mac.hcf.originatorMacDataService.mpduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
client1.wlan.mac.hcf.singleProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.singleProtectionMechanism.rateSelectionModule	string
client1.wlan.mac.hcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.rateSelection.multicastFrameBitrate	double	-1bps
client1.wlan.mac.hcf.rateSelection.responseAckFrameBitrate	double	-1bps
client1.wlan.mac.hcf.rateSelection.responseBlockAckFrameBitrate	double	-1bps
client1.wlan.mac.hcf.rateSelection.responseCtsFrameBitrate	double	-1bps
client1.wlan.mac.hcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
client1.wlan.mac.hcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
client1.wlan.mac.hcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
client1.wlan.mac.hcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
client1.wlan.mac.hcf.rateSelection.controlFrameBitrate	double	-1bps
client1.wlan.mac.hcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.originatorAckPolicy.rateSelectionModule	string
client1.wlan.mac.hcf.originatorAckPolicy.blockAckReqThreshold	int	5
client1.wlan.mac.hcf.originatorAckPolicy.maxBlockAckPolicyFrameLength	int	1000B
client1.wlan.mac.hcf.originatorAckPolicy.blockAckTimeout	double	-1s
client1.wlan.mac.hcf.originatorAckPolicy.ackTimeout	double	-1s
client1.wlan.mac.hcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.recipientAckPolicy.rateSelectionModule	string
client1.wlan.mac.hcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.rtsPolicy.rateSelectionModule	string
client1.wlan.mac.hcf.rtsPolicy.ctsTimeout	double	-1s
client1.wlan.mac.hcf.rtsPolicy.rtsThreshold	int	2346B
client1.wlan.mac.hcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.ctsPolicy.rxModule	string
client1.wlan.mac.hcf.ctsPolicy.rateSelectionModule	string
client1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
client1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.aMsduSupported	bool	true
client1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
client1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
client1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
client1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.aMsduSupported	bool	true
client1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
client1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
client1.wlan.mac.ds.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.ds.mibModule	string
client1.wlan.mac.rx.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.tx.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.wlan.mac.tx.rxModule	string
client1.ppp.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ppp.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client1.ppp.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client1.ppp.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client1.ppp.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client1.ppp.pcapRecorder.fileFormat	string	“pcapng”
client1.ppp.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client1.ppp.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client1.ppp.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client1.ppp.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client1.ppp.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client1.ppp.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client1.ppp.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client1.ppp.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client1.ppp.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client1.ppp.queue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ppp.queue.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
client1.ppp.queue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
client1.ppp.queue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
client1.ppp.queue.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
client1.ppp.queue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
client1.ppp.ppp.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ppp.ppp.interfaceTableModule	string		The path to the InterfaceTable module
client1.ppp.ppp.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
client1.ppp.ppp.mtu	int	4470B
client1.ppp.ppp.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
client1.ppp.ppp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
client1.eth.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.eth.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client1.eth.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client1.eth.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client1.eth.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client1.eth.pcapRecorder.fileFormat	string	“pcapng”
client1.eth.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client1.eth.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client1.eth.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client1.eth.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client1.eth.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client1.eth.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client1.eth.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client1.eth.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client1.eth.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client1.tun.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.tun.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client1.tun.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client1.tun.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client1.tun.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client1.tun.pcapRecorder.fileFormat	string	“pcapng”
client1.tun.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client1.tun.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client1.tun.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client1.tun.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client1.tun.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client1.tun.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client1.tun.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client1.tun.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client1.tun.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client1.tun.tun.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.tun.tun.interfaceTableModule	string		The path to the InterfaceTable module
client1.tun.tun.mtu	int	1500B
client1.virt.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.virt.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client1.virt.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client1.virt.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client1.virt.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client1.virt.pcapRecorder.fileFormat	string	“pcapng”
client1.virt.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client1.virt.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client1.virt.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client1.virt.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client1.virt.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client1.virt.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client1.virt.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client1.virt.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client1.virt.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client1.virt.tunnel.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.virt.tunnel.interfaceTableModule	string
client1.virt.tunnel.realInterface	string
client1.virt.tunnel.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
client1.virt.tunnel.address	string	“copy”
client1.virt.tunnel.vlanId	int	-1
client1.virt.tunnel.steal	bool	vlanId != -1
client1.ipv4.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.configurator.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv4.configurator.routingTableModule	string
client1.ipv4.configurator.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
client1.ipv4.configurator.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
client1.ipv4.routingTable.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv4.routingTable.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
client1.ipv4.routingTable.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
client1.ipv4.routingTable.forwarding	bool	true	Turns IP forwarding on/off
client1.ipv4.routingTable.multicastForwarding	bool	false	Turns multicast forwarding on/off
client1.ipv4.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
client1.ipv4.routingTable.routingFile	string	“”	Routing table file name
client1.ipv4.natTable.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.natTable.networkProtocolModule	string	“^.ip”
client1.ipv4.natTable.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
client1.ipv4.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.up.interfaceTableModule	string		Module path to the InterfaceTable module
client1.ipv4.up.forwardServiceRegistration	bool	true
client1.ipv4.up.forwardProtocolRegistration	bool	true
client1.ipv4.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.ipv4.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.ipv4.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.ipv4.igmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.igmp.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv4.igmp.routingTableModule	string
client1.ipv4.igmp.checksumMode	string	“declared”
client1.ipv4.igmp.enabled	bool	true
client1.ipv4.igmp.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
client1.ipv4.igmp.queryInterval	double	125s
client1.ipv4.igmp.queryResponseInterval	double	10s
client1.ipv4.igmp.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
client1.ipv4.igmp.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
client1.ipv4.igmp.startupQueryInterval	double	queryInterval / 4
client1.ipv4.igmp.startupQueryCount	int	robustnessVariable
client1.ipv4.igmp.lastMemberQueryInterval	double	1s
client1.ipv4.igmp.lastMemberQueryCount	int	robustnessVariable
client1.ipv4.igmp.unsolicitedReportInterval	double	10s
client1.ipv4.icmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.icmp.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv4.icmp.routingTableModule	string
client1.ipv4.icmp.checksumMode	string	“declared”
client1.ipv4.icmp.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
client1.ipv4.mp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.mp.interfaceTableModule	string		Module path to the InterfaceTable module
client1.ipv4.mp.forwardServiceRegistration	bool	true
client1.ipv4.mp.forwardProtocolRegistration	bool	true
client1.ipv4.mp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.ipv4.mp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.ipv4.mp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.ipv4.ip.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.ip.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv4.ip.routingTableModule	string
client1.ipv4.ip.arpModule	string
client1.ipv4.ip.icmpModule	string
client1.ipv4.ip.checksumMode	string	“declared”
client1.ipv4.ip.timeToLive	int	32
client1.ipv4.ip.multicastTimeToLive	int	32
client1.ipv4.ip.fragmentTimeout	double	60s
client1.ipv4.ip.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
client1.ipv4.ip.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
client1.ipv4.ip.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
client1.ipv4.ip.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
client1.ipv4.ip.maxLifetime	double	-1s	Packets older than the limit are discarded
client1.ipv4.arp.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.arp.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv4.arp.routingTableModule	string
client1.ipv4.arp.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
client1.ipv4.arp.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
client1.ipv4.arp.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
client1.ipv4.arp.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
client1.ipv4.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.ipsec.networkProtocolModule	string	“^.ip”
client1.ipv4.ipsec.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
client1.ipv4.ipsec.interfaceTableModule	string
client1.ipv4.ipsec.spdModule	string	“^.spd”
client1.ipv4.ipsec.sadModule	string	“^.sad”
client1.ipv4.ipsec.spdConfig	xml
client1.ipv4.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
client1.ipv4.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
client1.ipv4.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
client1.ipv4.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
client1.ipv4.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
client1.ipv4.ipsec.ahProtectOutDelay	double	0.0s
client1.ipv4.ipsec.ahProtectInDelay	double	0.0s
client1.ipv4.ipsec.espProtectOutDelay	double	0.0s
client1.ipv4.ipsec.espProtectInDelay	double	0.0s
client1.ipv4.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv4.lp.interfaceTableModule	string		Module path to the InterfaceTable module
client1.ipv4.lp.forwardServiceRegistration	bool	true
client1.ipv4.lp.forwardProtocolRegistration	bool	true
client1.ipv4.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.ipv4.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.ipv4.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.ipv6.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.configurator.interfaceTableModule	string
client1.ipv6.configurator.routingTableModule	string
client1.ipv6.configurator.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
client1.ipv6.configurator.configureRoutingTable	bool	true
client1.ipv6.routingTable.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv6.routingTable.routes	xml	xml(“<routingTable/>”)
client1.ipv6.routingTable.forwarding	bool	false
client1.ipv6.routingTable.isRouter	bool	this.forwarding
client1.ipv6.routingTable.multicastForwarding	bool	false
client1.ipv6.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
client1.ipv6.routingTable.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
client1.ipv6.routingTable.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
client1.ipv6.routingTable.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
client1.ipv6.routingTable.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
client1.ipv6.routingTable.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
client1.ipv6.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.up.interfaceTableModule	string		Module path to the InterfaceTable module
client1.ipv6.up.forwardServiceRegistration	bool	true
client1.ipv6.up.forwardProtocolRegistration	bool	true
client1.ipv6.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.ipv6.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.ipv6.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.ipv6.icmpv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.icmpv6.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv6.icmpv6.checksumMode	string	“declared”
client1.ipv6.icmpv6.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
client1.ipv6.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.lp.interfaceTableModule	string		Module path to the InterfaceTable module
client1.ipv6.lp.forwardServiceRegistration	bool	true
client1.ipv6.lp.forwardProtocolRegistration	bool	true
client1.ipv6.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.ipv6.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.ipv6.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.ipv6.neighbourDiscovery.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.neighbourDiscovery.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv6.neighbourDiscovery.checksumMode	string	“declared”
client1.ipv6.neighbourDiscovery.icmpv6Module	string
client1.ipv6.neighbourDiscovery.mipv6Module	string
client1.ipv6.neighbourDiscovery.routingTableModule	string
client1.ipv6.neighbourDiscovery.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
client1.ipv6.neighbourDiscovery.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
client1.ipv6.neighbourDiscovery.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
client1.ipv6.neighbourDiscovery.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
client1.ipv6.neighbourDiscovery.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
client1.ipv6.neighbourDiscovery.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
client1.ipv6.neighbourDiscovery.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
client1.ipv6.neighbourDiscovery.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
client1.ipv6.neighbourDiscovery.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
client1.ipv6.neighbourDiscovery.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
client1.ipv6.ipv6.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.ipv6.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv6.ipv6.routingTableModule	string
client1.ipv6.ipv6.ipv6NeighbourDiscoveryModule	string
client1.ipv6.ipv6.icmpv6Module	string
client1.ipv6.ipv6.procDelay	double	0s
client1.ipv6.ipv6.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
client1.ipv6.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.ipsec.interfaceTableModule	string
client1.ipv6.ipsec.spdModule	string	“^.spd”
client1.ipv6.ipsec.sadModule	string	“^.sad”
client1.ipv6.ipsec.spdConfig	xml
client1.ipv6.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
client1.ipv6.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
client1.ipv6.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
client1.ipv6.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
client1.ipv6.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
client1.ipv6.ipsec.ahProtectOutDelay	double	0.0s
client1.ipv6.ipsec.ahProtectInDelay	double	0.0s
client1.ipv6.ipsec.espProtectOutDelay	double	0.0s
client1.ipv6.ipsec.espProtectInDelay	double	0.0s
client1.ipv6.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.mipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.mipv6.interfaceTableModule	string		The path to the InterfaceTable module
client1.ipv6.mipv6.ipv6NeighbourDiscoveryModule	string
client1.ipv6.mipv6.bindingUpdateListModule	string
client1.ipv6.mipv6.bindingCacheModule	string
client1.ipv6.mipv6.isHomeAgent	bool
client1.ipv6.mipv6.isMobileNode	bool
client1.ipv6.mipv6.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
client1.ipv6.mipv6.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
client1.ipv6.mipv6.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
client1.ipv6.buList.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.bindingCache.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.pmipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.pmipv6.interfaceTableModule	string		path to the InterfaceTable module
client1.ipv6.pmipv6.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
client1.ipv6.pmipv6.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
client1.ipv6.pmipv6.isMobileAccessGateway	bool	false
client1.ipv6.pmipv6.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
client1.ipv6.pmipv6.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
client1.ipv6.pmipv6.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
client1.ipv6.pmipv6.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
client1.ipv6.pmipv6.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
client1.ipv6.mld.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.ipv6.mld.interfaceTableModule	string		path to the InterfaceTable module
client1.ipv6.mld.routingTableModule	string		path to the Ipv6RoutingTable module
client1.ipv6.mld.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
client1.ipv6.mld.enabled	bool	true	when false, MLD is inert on this node (see above)
client1.ipv6.mld.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
client1.ipv6.mld.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
client1.ipv6.mld.queryInterval	double	125s	querier: interval between periodic General Queries
client1.ipv6.mld.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
client1.ipv6.mld.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
client1.ipv6.mld.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
client1.ipv6.mld.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
client1.ipv6.mld.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
client1.ipv6.mld.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
client1.nl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.nl.interfaceTableModule	string		Module path to the InterfaceTable module
client1.nl.forwardServiceRegistration	bool	true
client1.nl.forwardProtocolRegistration	bool	true
client1.nl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.nl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.nl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.udp.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.udp.interfaceTableModule	string		The path to the InterfaceTable module
client1.udp.checksumMode	string	“declared”
client1.udp.defaultMulticastLoop	bool	true
client1.tcp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.tcp.checksumMode	string	“declared”
client1.tcp.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
client1.tcp.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
client1.tcp.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
client1.tcp.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
client1.tcp.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
client1.tcp.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
client1.tcp.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
client1.tcp.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
client1.tcp.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
client1.tcp.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
client1.tcp.msl	int	120s	Maximum Segment Lifetime
client1.tcp.tcpAlgorithmClass	string	“TcpReno”
client1.tcp.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
client1.tcp.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
client1.tcp.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
client1.tcp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
client1.tcp.ecnWillingness	bool	false	True if willing to use ECN
client1.tcp.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
client1.tcp.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
client1.tcp.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
client1.sctp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.sctp.interfaceTableModule	string
client1.sctp.routingTableModule	string
client1.sctp.checksumMode	string	“declared”
client1.sctp.numGapReports	int	3
client1.sctp.rtoInitial	double	3s
client1.sctp.rtoMin	double	1s
client1.sctp.rtoMax	double	60s
client1.sctp.rtoAlpha	double	0.125
client1.sctp.rtoBeta	double	0.250
client1.sctp.maxBurst	int	4
client1.sctp.maxBurstVariant	string	“maxBurst”
client1.sctp.initialWindow	int	0
client1.sctp.assocMaxRetrans	int	10
client1.sctp.pathMaxRetrans	int	5
client1.sctp.maxInitRetrans	int	8
client1.sctp.sackPeriod	double	200ms
client1.sctp.sackFrequency	int	2
client1.sctp.reactivatePrimaryPath	bool	false
client1.sctp.sendQueueLimit	int	0
client1.sctp.validCookieLifetime	double	10s
client1.sctp.enableHeartbeats	bool	true
client1.sctp.hbInterval	double	30s
client1.sctp.sendHeartbeatsOnActivePaths	bool	false
client1.sctp.nagleEnabled	bool	true
client1.sctp.naglePoint	int	1468
client1.sctp.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
client1.sctp.fastRecoverySupported	bool	true
client1.sctp.sctpAlgorithmClass	string	“SctpAlg”
client1.sctp.ccModule	int	0	RFC4960=0
client1.sctp.osbWithHeader	bool	false
client1.sctp.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
client1.sctp.ssModule	int	0	ROUND_ROBIN=0
client1.sctp.arwnd	int	65535
client1.sctp.swsLimit	int	3000	Limit for SWS
client1.sctp.udpEncapsEnabled	bool	false
client1.sctp.natFriendly	bool	false
client1.sctp.bytesToAddPerRcvdChunk	int	0	For flow control
client1.sctp.bytesToAddPerPeerChunk	int	0	For flow control
client1.sctp.tellArwnd	bool	false	For flow control
client1.sctp.messageAcceptLimit	int	0	For flow control
client1.sctp.fairStart	double	0s
client1.sctp.fairStop	double	0s
client1.sctp.streamsToPaths	string	“”
client1.sctp.startEndToEndDelay	int	0
client1.sctp.stopEndToEndDelay	int	10
client1.sctp.throughputInterval	double	1
client1.sctp.auth	bool	false
client1.sctp.chunks	string	“”
client1.sctp.padding	bool	false
client1.sctp.addIP	bool	false
client1.sctp.addTime	double	0s
client1.sctp.addAddress	string	“”
client1.sctp.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
client1.sctp.packetDrop	bool	false
client1.sctp.sackNow	bool	false
client1.sctp.highSpeedCC	bool	false
client1.sctp.checkSackSeqNumber	bool	false
client1.sctp.nrSack	bool	false
client1.sctp.disableReneging	bool	false
client1.sctp.gapReportLimit	int	100000000
client1.sctp.gapListOptimizationVariant	string	“none”
client1.sctp.smartOverfullSACKHandling	bool	false
client1.sctp.allowQoSTracking	bool	false
client1.sctp.qosTrackingInterval	double	1.0s
client1.sctp.cmtSendAllVariant	string	“normal”
client1.sctp.cmtRetransmissionVariant	string	“normal”
client1.sctp.cmtCUCVariant	string	“normal”
client1.sctp.cmtBufferSplitVariant	string	“none”
client1.sctp.cmtBufferSplittingUsesOSB	bool	false
client1.sctp.cmtUseSFR	bool	true
client1.sctp.cmtUseDAC	bool	true
client1.sctp.cmtUseFRC	bool	true
client1.sctp.cmtSmartT3Reset	bool	true
client1.sctp.cmtSmartFastRTX	bool	true
client1.sctp.cmtSmartReneging	bool	false
client1.sctp.cmtSlowPathRTTUpdate	bool	false
client1.sctp.cmtChunkReschedulingVariant	string	“none”
client1.sctp.cmtChunkReschedulingThreshold	double	0.5
client1.sctp.cmtMovedChunksReduceCwnd	bool	true
client1.sctp.movedChunkFastRTXFactor	double	2.0
client1.sctp.cmtSackPath	string	“standard”
client1.sctp.strictCwndBooking	bool	false
client1.sctp.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
client1.sctp.cmtCCPathGroups	string	“”
client1.sctp.rpPathBlocking	bool	false
client1.sctp.rpScaleBlockingTimeout	bool	false
client1.sctp.rpMinCwnd	int	1
client1.quic.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.quic.routingTableModule	string		Set by StandardHost.
client1.quic.sendZeroRttTokenAsServer	bool	false
client1.quic.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
client1.quic.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
client1.quic.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
client1.quic.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
client1.quic.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
client1.quic.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
client1.quic.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
client1.quic.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
client1.quic.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
client1.quic.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
client1.quic.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
client1.quic.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
client1.quic.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
client1.quic.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
client1.quic.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
client1.quic.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
client1.quic.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
client1.quic.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
client1.quic.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
client1.quic.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
client1.quic.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
client1.quic.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
client1.quic.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
client1.quic.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
client1.quic.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
client1.quic.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
client1.quic.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
client1.quic.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
client1.quic.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
client1.tn.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.tn.interfaceTableModule	string		Module path to the InterfaceTable module
client1.tn.forwardServiceRegistration	bool	true
client1.tn.forwardProtocolRegistration	bool	true
client1.tn.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.tn.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.tn.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client1.at.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client1.at.interfaceTableModule	string		Module path to the InterfaceTable module
client1.at.forwardServiceRegistration	bool	true
client1.at.forwardProtocolRegistration	bool	true
client1.at.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client1.at.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client1.at.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.status.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.status.initialStatus	string	“UP”	Initial status of the network node
client2.environment.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.environment.initStage	int	0	Initialization stage for the setup command
client2.environment.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
client2.environment.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
client2.environment.setupCommand	string	“”	A host OS system command
client2.environment.teardownCommand	string	“”	A host OS system command
client2.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client2.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client2.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client2.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client2.pcapRecorder.fileFormat	string	“pcapng”
client2.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client2.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client2.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client2.pcapRecorder.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
client2.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client2.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client2.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client2.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client2.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client2.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client2.interfaceTable.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.interfaceTable.displayAddresses	bool	false	Whether to display IP addresses on links
client2.cb.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.cb.interfaceTableModule	string		Module path to the InterfaceTable module
client2.cb.forwardServiceRegistration	bool	true
client2.cb.forwardProtocolRegistration	bool	true
client2.cb.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.cb.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.cb.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.bl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.bl.interfaceTableModule	string		Module path to the InterfaceTable module
client2.bl.forwardServiceRegistration	bool	true
client2.bl.forwardProtocolRegistration	bool	true
client2.bl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.bl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.bl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.ethernet.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ethernet.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
client2.ethernet.interfaceTableModule	string		The path to the InterfaceTable module
client2.ethernet.fcsMode	string	“declared”
client2.ethernet.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
client2.ethernet.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
client2.li.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.li.interfaceTableModule	string		Module path to the InterfaceTable module
client2.li.forwardServiceRegistration	bool	true
client2.li.forwardProtocolRegistration	bool	true
client2.li.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.li.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.li.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.lo.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.lo.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client2.lo.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client2.lo.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client2.lo.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client2.lo.pcapRecorder.fileFormat	string	“pcapng”
client2.lo.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client2.lo.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client2.lo.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client2.lo.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client2.lo.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client2.lo.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client2.lo.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client2.lo.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client2.lo.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client2.lo.lo.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.lo.lo.interfaceTableModule	string		The path to the InterfaceTable module
client2.lo.lo.mtu	int	4470B
client2.wlan.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client2.wlan.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client2.wlan.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client2.wlan.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client2.wlan.pcapRecorder.fileFormat	string	“pcapng”
client2.wlan.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client2.wlan.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client2.wlan.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client2.wlan.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client2.wlan.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client2.wlan.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client2.wlan.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client2.wlan.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client2.wlan.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client2.wlan.mib.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.agent.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.agent.interfaceTableModule	string		The path to the InterfaceTable module
client2.wlan.agent.mibModule	string
client2.wlan.agent.activeScan	bool	true	Selects between active and passive scanning
client2.wlan.agent.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
client2.wlan.agent.probeDelay	double	100ms	Delay before sending a probe request during active scanning
client2.wlan.agent.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
client2.wlan.agent.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
client2.wlan.agent.authenticationTimeout	double	5s	Timeout for the authentication procedure
client2.wlan.agent.associationTimeout	double	5s	Timeout for the association procedure
client2.wlan.agent.startingTime	double	-1s	Agent starting time.
client2.wlan.agent.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
client2.wlan.mgmt.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mgmt.interfaceTableModule	string		The path to the InterfaceTable module
client2.wlan.mgmt.numChannels	int	1	Number of channels to scan
client2.wlan.mgmt.mibModule	string
client2.wlan.mgmt.macModule	string		The path to the MAC module
client2.wlan.mac.dcf.channelAccess.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.channelAccess.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
client2.wlan.mac.dcf.channelAccess.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
client2.wlan.mac.dcf.channelAccess.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
client2.wlan.mac.dcf.channelAccess.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
client2.wlan.mac.dcf.channelAccess.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
client2.wlan.mac.dcf.channelAccess.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.channelAccess.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
client2.wlan.mac.dcf.channelAccess.inProgressFrames.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
client2.wlan.mac.dcf.channelAccess.inProgressFrames.ackHandlerModule	string	“^.^.ackHandler”
client2.wlan.mac.dcf.channelAccess.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.channelAccess.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
client2.wlan.mac.dcf.channelAccess.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
client2.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
client2.wlan.mac.dcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.rateSelection.multicastFrameBitrate	double	-1bps
client2.wlan.mac.dcf.rateSelection.responseAckFrameBitrate	double	-1bps
client2.wlan.mac.dcf.rateSelection.responseCtsFrameBitrate	double	-1bps
client2.wlan.mac.dcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
client2.wlan.mac.dcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
client2.wlan.mac.dcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
client2.wlan.mac.dcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
client2.wlan.mac.dcf.rateSelection.controlFrameBitrate	double	-1bps
client2.wlan.mac.dcf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.recoveryProcedure.shortRetryLimit	int	7
client2.wlan.mac.dcf.recoveryProcedure.longRetryLimit	int	4
client2.wlan.mac.dcf.originatorProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.originatorProtectionMechanism.rateSelectionModule	string
client2.wlan.mac.dcf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.originatorAckPolicy.rateSelectionModule	string
client2.wlan.mac.dcf.originatorAckPolicy.ackTimeout	double	-1s
client2.wlan.mac.dcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.recipientAckPolicy.rateSelectionModule	string
client2.wlan.mac.dcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.rtsPolicy.rateSelectionModule	string
client2.wlan.mac.dcf.rtsPolicy.ctsTimeout	double	-1s
client2.wlan.mac.dcf.rtsPolicy.rtsThreshold	int	2346B
client2.wlan.mac.dcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.dcf.ctsPolicy.rxModule	string
client2.wlan.mac.dcf.ctsPolicy.rateSelectionModule	string
client2.wlan.mac.hcf.edca.edcaf.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.edcaf.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
client2.wlan.mac.hcf.edca.edcaf.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
client2.wlan.mac.hcf.edca.edcaf.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
client2.wlan.mac.hcf.edca.edcaf.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
client2.wlan.mac.hcf.edca.edcaf.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
client2.wlan.mac.hcf.edca.edcaf.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.edcaf.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
client2.wlan.mac.hcf.edca.edcaf.inProgressFrames.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
client2.wlan.mac.hcf.edca.edcaf.inProgressFrames.ackHandlerModule	string	“^.ackHandler”
client2.wlan.mac.hcf.edca.edcaf.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.edcaf.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
client2.wlan.mac.hcf.edca.edcaf.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
client2.wlan.mac.hcf.edca.edcaf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.edcaf.txopProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.edcaf.txopProcedure.txopLimit	double	-1s
client2.wlan.mac.hcf.edca.edcaf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.edcaf.recoveryProcedure.shortRetryLimit	int	7
client2.wlan.mac.hcf.edca.edcaf.recoveryProcedure.longRetryLimit	int	4
client2.wlan.mac.hcf.edca.collisionController.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.shortRetryLimit	int	7
client2.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.longRetryLimit	int	4
client2.wlan.mac.hcf.hcca.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
client2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
client2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.maxAMsduSize	int	4065	-1 means infinity
client2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
client2.wlan.mac.hcf.originatorMacDataService.mpduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
client2.wlan.mac.hcf.singleProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.singleProtectionMechanism.rateSelectionModule	string
client2.wlan.mac.hcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.rateSelection.multicastFrameBitrate	double	-1bps
client2.wlan.mac.hcf.rateSelection.responseAckFrameBitrate	double	-1bps
client2.wlan.mac.hcf.rateSelection.responseBlockAckFrameBitrate	double	-1bps
client2.wlan.mac.hcf.rateSelection.responseCtsFrameBitrate	double	-1bps
client2.wlan.mac.hcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
client2.wlan.mac.hcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
client2.wlan.mac.hcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
client2.wlan.mac.hcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
client2.wlan.mac.hcf.rateSelection.controlFrameBitrate	double	-1bps
client2.wlan.mac.hcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.originatorAckPolicy.rateSelectionModule	string
client2.wlan.mac.hcf.originatorAckPolicy.blockAckReqThreshold	int	5
client2.wlan.mac.hcf.originatorAckPolicy.maxBlockAckPolicyFrameLength	int	1000B
client2.wlan.mac.hcf.originatorAckPolicy.blockAckTimeout	double	-1s
client2.wlan.mac.hcf.originatorAckPolicy.ackTimeout	double	-1s
client2.wlan.mac.hcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.recipientAckPolicy.rateSelectionModule	string
client2.wlan.mac.hcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.rtsPolicy.rateSelectionModule	string
client2.wlan.mac.hcf.rtsPolicy.ctsTimeout	double	-1s
client2.wlan.mac.hcf.rtsPolicy.rtsThreshold	int	2346B
client2.wlan.mac.hcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.ctsPolicy.rxModule	string
client2.wlan.mac.hcf.ctsPolicy.rateSelectionModule	string
client2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
client2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.aMsduSupported	bool	true
client2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
client2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
client2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
client2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.aMsduSupported	bool	true
client2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
client2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
client2.wlan.mac.ds.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.ds.mibModule	string
client2.wlan.mac.rx.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.tx.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.wlan.mac.tx.rxModule	string
client2.ppp.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ppp.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client2.ppp.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client2.ppp.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client2.ppp.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client2.ppp.pcapRecorder.fileFormat	string	“pcapng”
client2.ppp.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client2.ppp.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client2.ppp.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client2.ppp.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client2.ppp.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client2.ppp.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client2.ppp.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client2.ppp.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client2.ppp.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client2.ppp.queue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ppp.queue.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
client2.ppp.queue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
client2.ppp.queue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
client2.ppp.queue.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
client2.ppp.queue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
client2.ppp.ppp.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ppp.ppp.interfaceTableModule	string		The path to the InterfaceTable module
client2.ppp.ppp.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
client2.ppp.ppp.mtu	int	4470B
client2.ppp.ppp.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
client2.ppp.ppp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
client2.eth.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.eth.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client2.eth.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client2.eth.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client2.eth.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client2.eth.pcapRecorder.fileFormat	string	“pcapng”
client2.eth.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client2.eth.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client2.eth.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client2.eth.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client2.eth.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client2.eth.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client2.eth.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client2.eth.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client2.eth.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client2.tun.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.tun.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client2.tun.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client2.tun.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client2.tun.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client2.tun.pcapRecorder.fileFormat	string	“pcapng”
client2.tun.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client2.tun.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client2.tun.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client2.tun.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client2.tun.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client2.tun.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client2.tun.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client2.tun.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client2.tun.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client2.tun.tun.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.tun.tun.interfaceTableModule	string		The path to the InterfaceTable module
client2.tun.tun.mtu	int	1500B
client2.virt.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.virt.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
client2.virt.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
client2.virt.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
client2.virt.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
client2.virt.pcapRecorder.fileFormat	string	“pcapng”
client2.virt.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
client2.virt.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
client2.virt.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
client2.virt.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
client2.virt.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
client2.virt.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
client2.virt.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
client2.virt.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
client2.virt.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
client2.virt.tunnel.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.virt.tunnel.interfaceTableModule	string
client2.virt.tunnel.realInterface	string
client2.virt.tunnel.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
client2.virt.tunnel.address	string	“copy”
client2.virt.tunnel.vlanId	int	-1
client2.virt.tunnel.steal	bool	vlanId != -1
client2.ipv4.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.configurator.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv4.configurator.routingTableModule	string
client2.ipv4.configurator.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
client2.ipv4.configurator.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
client2.ipv4.routingTable.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv4.routingTable.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
client2.ipv4.routingTable.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
client2.ipv4.routingTable.forwarding	bool	true	Turns IP forwarding on/off
client2.ipv4.routingTable.multicastForwarding	bool	false	Turns multicast forwarding on/off
client2.ipv4.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
client2.ipv4.routingTable.routingFile	string	“”	Routing table file name
client2.ipv4.natTable.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.natTable.networkProtocolModule	string	“^.ip”
client2.ipv4.natTable.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
client2.ipv4.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.up.interfaceTableModule	string		Module path to the InterfaceTable module
client2.ipv4.up.forwardServiceRegistration	bool	true
client2.ipv4.up.forwardProtocolRegistration	bool	true
client2.ipv4.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.ipv4.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.ipv4.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.ipv4.igmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.igmp.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv4.igmp.routingTableModule	string
client2.ipv4.igmp.checksumMode	string	“declared”
client2.ipv4.igmp.enabled	bool	true
client2.ipv4.igmp.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
client2.ipv4.igmp.queryInterval	double	125s
client2.ipv4.igmp.queryResponseInterval	double	10s
client2.ipv4.igmp.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
client2.ipv4.igmp.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
client2.ipv4.igmp.startupQueryInterval	double	queryInterval / 4
client2.ipv4.igmp.startupQueryCount	int	robustnessVariable
client2.ipv4.igmp.lastMemberQueryInterval	double	1s
client2.ipv4.igmp.lastMemberQueryCount	int	robustnessVariable
client2.ipv4.igmp.unsolicitedReportInterval	double	10s
client2.ipv4.icmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.icmp.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv4.icmp.routingTableModule	string
client2.ipv4.icmp.checksumMode	string	“declared”
client2.ipv4.icmp.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
client2.ipv4.mp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.mp.interfaceTableModule	string		Module path to the InterfaceTable module
client2.ipv4.mp.forwardServiceRegistration	bool	true
client2.ipv4.mp.forwardProtocolRegistration	bool	true
client2.ipv4.mp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.ipv4.mp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.ipv4.mp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.ipv4.ip.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.ip.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv4.ip.routingTableModule	string
client2.ipv4.ip.arpModule	string
client2.ipv4.ip.icmpModule	string
client2.ipv4.ip.checksumMode	string	“declared”
client2.ipv4.ip.timeToLive	int	32
client2.ipv4.ip.multicastTimeToLive	int	32
client2.ipv4.ip.fragmentTimeout	double	60s
client2.ipv4.ip.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
client2.ipv4.ip.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
client2.ipv4.ip.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
client2.ipv4.ip.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
client2.ipv4.ip.maxLifetime	double	-1s	Packets older than the limit are discarded
client2.ipv4.arp.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.arp.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv4.arp.routingTableModule	string
client2.ipv4.arp.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
client2.ipv4.arp.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
client2.ipv4.arp.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
client2.ipv4.arp.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
client2.ipv4.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.ipsec.networkProtocolModule	string	“^.ip”
client2.ipv4.ipsec.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
client2.ipv4.ipsec.interfaceTableModule	string
client2.ipv4.ipsec.spdModule	string	“^.spd”
client2.ipv4.ipsec.sadModule	string	“^.sad”
client2.ipv4.ipsec.spdConfig	xml
client2.ipv4.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
client2.ipv4.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
client2.ipv4.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
client2.ipv4.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
client2.ipv4.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
client2.ipv4.ipsec.ahProtectOutDelay	double	0.0s
client2.ipv4.ipsec.ahProtectInDelay	double	0.0s
client2.ipv4.ipsec.espProtectOutDelay	double	0.0s
client2.ipv4.ipsec.espProtectInDelay	double	0.0s
client2.ipv4.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv4.lp.interfaceTableModule	string		Module path to the InterfaceTable module
client2.ipv4.lp.forwardServiceRegistration	bool	true
client2.ipv4.lp.forwardProtocolRegistration	bool	true
client2.ipv4.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.ipv4.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.ipv4.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.ipv6.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.configurator.interfaceTableModule	string
client2.ipv6.configurator.routingTableModule	string
client2.ipv6.configurator.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
client2.ipv6.configurator.configureRoutingTable	bool	true
client2.ipv6.routingTable.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv6.routingTable.routes	xml	xml(“<routingTable/>”)
client2.ipv6.routingTable.forwarding	bool	false
client2.ipv6.routingTable.isRouter	bool	this.forwarding
client2.ipv6.routingTable.multicastForwarding	bool	false
client2.ipv6.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
client2.ipv6.routingTable.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
client2.ipv6.routingTable.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
client2.ipv6.routingTable.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
client2.ipv6.routingTable.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
client2.ipv6.routingTable.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
client2.ipv6.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.up.interfaceTableModule	string		Module path to the InterfaceTable module
client2.ipv6.up.forwardServiceRegistration	bool	true
client2.ipv6.up.forwardProtocolRegistration	bool	true
client2.ipv6.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.ipv6.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.ipv6.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.ipv6.icmpv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.icmpv6.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv6.icmpv6.checksumMode	string	“declared”
client2.ipv6.icmpv6.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
client2.ipv6.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.lp.interfaceTableModule	string		Module path to the InterfaceTable module
client2.ipv6.lp.forwardServiceRegistration	bool	true
client2.ipv6.lp.forwardProtocolRegistration	bool	true
client2.ipv6.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.ipv6.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.ipv6.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.ipv6.neighbourDiscovery.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.neighbourDiscovery.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv6.neighbourDiscovery.checksumMode	string	“declared”
client2.ipv6.neighbourDiscovery.icmpv6Module	string
client2.ipv6.neighbourDiscovery.mipv6Module	string
client2.ipv6.neighbourDiscovery.routingTableModule	string
client2.ipv6.neighbourDiscovery.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
client2.ipv6.neighbourDiscovery.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
client2.ipv6.neighbourDiscovery.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
client2.ipv6.neighbourDiscovery.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
client2.ipv6.neighbourDiscovery.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
client2.ipv6.neighbourDiscovery.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
client2.ipv6.neighbourDiscovery.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
client2.ipv6.neighbourDiscovery.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
client2.ipv6.neighbourDiscovery.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
client2.ipv6.neighbourDiscovery.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
client2.ipv6.ipv6.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.ipv6.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv6.ipv6.routingTableModule	string
client2.ipv6.ipv6.ipv6NeighbourDiscoveryModule	string
client2.ipv6.ipv6.icmpv6Module	string
client2.ipv6.ipv6.procDelay	double	0s
client2.ipv6.ipv6.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
client2.ipv6.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.ipsec.interfaceTableModule	string
client2.ipv6.ipsec.spdModule	string	“^.spd”
client2.ipv6.ipsec.sadModule	string	“^.sad”
client2.ipv6.ipsec.spdConfig	xml
client2.ipv6.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
client2.ipv6.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
client2.ipv6.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
client2.ipv6.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
client2.ipv6.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
client2.ipv6.ipsec.ahProtectOutDelay	double	0.0s
client2.ipv6.ipsec.ahProtectInDelay	double	0.0s
client2.ipv6.ipsec.espProtectOutDelay	double	0.0s
client2.ipv6.ipsec.espProtectInDelay	double	0.0s
client2.ipv6.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.mipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.mipv6.interfaceTableModule	string		The path to the InterfaceTable module
client2.ipv6.mipv6.ipv6NeighbourDiscoveryModule	string
client2.ipv6.mipv6.bindingUpdateListModule	string
client2.ipv6.mipv6.bindingCacheModule	string
client2.ipv6.mipv6.isHomeAgent	bool
client2.ipv6.mipv6.isMobileNode	bool
client2.ipv6.mipv6.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
client2.ipv6.mipv6.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
client2.ipv6.mipv6.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
client2.ipv6.buList.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.bindingCache.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.pmipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.pmipv6.interfaceTableModule	string		path to the InterfaceTable module
client2.ipv6.pmipv6.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
client2.ipv6.pmipv6.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
client2.ipv6.pmipv6.isMobileAccessGateway	bool	false
client2.ipv6.pmipv6.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
client2.ipv6.pmipv6.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
client2.ipv6.pmipv6.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
client2.ipv6.pmipv6.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
client2.ipv6.pmipv6.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
client2.ipv6.mld.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.ipv6.mld.interfaceTableModule	string		path to the InterfaceTable module
client2.ipv6.mld.routingTableModule	string		path to the Ipv6RoutingTable module
client2.ipv6.mld.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
client2.ipv6.mld.enabled	bool	true	when false, MLD is inert on this node (see above)
client2.ipv6.mld.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
client2.ipv6.mld.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
client2.ipv6.mld.queryInterval	double	125s	querier: interval between periodic General Queries
client2.ipv6.mld.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
client2.ipv6.mld.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
client2.ipv6.mld.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
client2.ipv6.mld.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
client2.ipv6.mld.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
client2.ipv6.mld.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
client2.nl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.nl.interfaceTableModule	string		Module path to the InterfaceTable module
client2.nl.forwardServiceRegistration	bool	true
client2.nl.forwardProtocolRegistration	bool	true
client2.nl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.nl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.nl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.udp.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.udp.interfaceTableModule	string		The path to the InterfaceTable module
client2.udp.checksumMode	string	“declared”
client2.udp.defaultMulticastLoop	bool	true
client2.tcp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.tcp.checksumMode	string	“declared”
client2.tcp.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
client2.tcp.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
client2.tcp.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
client2.tcp.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
client2.tcp.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
client2.tcp.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
client2.tcp.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
client2.tcp.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
client2.tcp.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
client2.tcp.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
client2.tcp.msl	int	120s	Maximum Segment Lifetime
client2.tcp.tcpAlgorithmClass	string	“TcpReno”
client2.tcp.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
client2.tcp.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
client2.tcp.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
client2.tcp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
client2.tcp.ecnWillingness	bool	false	True if willing to use ECN
client2.tcp.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
client2.tcp.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
client2.tcp.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
client2.sctp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.sctp.interfaceTableModule	string
client2.sctp.routingTableModule	string
client2.sctp.checksumMode	string	“declared”
client2.sctp.numGapReports	int	3
client2.sctp.rtoInitial	double	3s
client2.sctp.rtoMin	double	1s
client2.sctp.rtoMax	double	60s
client2.sctp.rtoAlpha	double	0.125
client2.sctp.rtoBeta	double	0.250
client2.sctp.maxBurst	int	4
client2.sctp.maxBurstVariant	string	“maxBurst”
client2.sctp.initialWindow	int	0
client2.sctp.assocMaxRetrans	int	10
client2.sctp.pathMaxRetrans	int	5
client2.sctp.maxInitRetrans	int	8
client2.sctp.sackPeriod	double	200ms
client2.sctp.sackFrequency	int	2
client2.sctp.reactivatePrimaryPath	bool	false
client2.sctp.sendQueueLimit	int	0
client2.sctp.validCookieLifetime	double	10s
client2.sctp.enableHeartbeats	bool	true
client2.sctp.hbInterval	double	30s
client2.sctp.sendHeartbeatsOnActivePaths	bool	false
client2.sctp.nagleEnabled	bool	true
client2.sctp.naglePoint	int	1468
client2.sctp.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
client2.sctp.fastRecoverySupported	bool	true
client2.sctp.sctpAlgorithmClass	string	“SctpAlg”
client2.sctp.ccModule	int	0	RFC4960=0
client2.sctp.osbWithHeader	bool	false
client2.sctp.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
client2.sctp.ssModule	int	0	ROUND_ROBIN=0
client2.sctp.arwnd	int	65535
client2.sctp.swsLimit	int	3000	Limit for SWS
client2.sctp.udpEncapsEnabled	bool	false
client2.sctp.natFriendly	bool	false
client2.sctp.bytesToAddPerRcvdChunk	int	0	For flow control
client2.sctp.bytesToAddPerPeerChunk	int	0	For flow control
client2.sctp.tellArwnd	bool	false	For flow control
client2.sctp.messageAcceptLimit	int	0	For flow control
client2.sctp.fairStart	double	0s
client2.sctp.fairStop	double	0s
client2.sctp.streamsToPaths	string	“”
client2.sctp.startEndToEndDelay	int	0
client2.sctp.stopEndToEndDelay	int	10
client2.sctp.throughputInterval	double	1
client2.sctp.auth	bool	false
client2.sctp.chunks	string	“”
client2.sctp.padding	bool	false
client2.sctp.addIP	bool	false
client2.sctp.addTime	double	0s
client2.sctp.addAddress	string	“”
client2.sctp.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
client2.sctp.packetDrop	bool	false
client2.sctp.sackNow	bool	false
client2.sctp.highSpeedCC	bool	false
client2.sctp.checkSackSeqNumber	bool	false
client2.sctp.nrSack	bool	false
client2.sctp.disableReneging	bool	false
client2.sctp.gapReportLimit	int	100000000
client2.sctp.gapListOptimizationVariant	string	“none”
client2.sctp.smartOverfullSACKHandling	bool	false
client2.sctp.allowQoSTracking	bool	false
client2.sctp.qosTrackingInterval	double	1.0s
client2.sctp.cmtSendAllVariant	string	“normal”
client2.sctp.cmtRetransmissionVariant	string	“normal”
client2.sctp.cmtCUCVariant	string	“normal”
client2.sctp.cmtBufferSplitVariant	string	“none”
client2.sctp.cmtBufferSplittingUsesOSB	bool	false
client2.sctp.cmtUseSFR	bool	true
client2.sctp.cmtUseDAC	bool	true
client2.sctp.cmtUseFRC	bool	true
client2.sctp.cmtSmartT3Reset	bool	true
client2.sctp.cmtSmartFastRTX	bool	true
client2.sctp.cmtSmartReneging	bool	false
client2.sctp.cmtSlowPathRTTUpdate	bool	false
client2.sctp.cmtChunkReschedulingVariant	string	“none”
client2.sctp.cmtChunkReschedulingThreshold	double	0.5
client2.sctp.cmtMovedChunksReduceCwnd	bool	true
client2.sctp.movedChunkFastRTXFactor	double	2.0
client2.sctp.cmtSackPath	string	“standard”
client2.sctp.strictCwndBooking	bool	false
client2.sctp.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
client2.sctp.cmtCCPathGroups	string	“”
client2.sctp.rpPathBlocking	bool	false
client2.sctp.rpScaleBlockingTimeout	bool	false
client2.sctp.rpMinCwnd	int	1
client2.quic.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.quic.routingTableModule	string		Set by StandardHost.
client2.quic.sendZeroRttTokenAsServer	bool	false
client2.quic.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
client2.quic.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
client2.quic.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
client2.quic.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
client2.quic.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
client2.quic.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
client2.quic.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
client2.quic.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
client2.quic.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
client2.quic.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
client2.quic.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
client2.quic.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
client2.quic.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
client2.quic.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
client2.quic.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
client2.quic.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
client2.quic.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
client2.quic.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
client2.quic.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
client2.quic.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
client2.quic.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
client2.quic.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
client2.quic.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
client2.quic.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
client2.quic.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
client2.quic.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
client2.quic.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
client2.quic.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
client2.quic.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
client2.tn.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.tn.interfaceTableModule	string		Module path to the InterfaceTable module
client2.tn.forwardServiceRegistration	bool	true
client2.tn.forwardProtocolRegistration	bool	true
client2.tn.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.tn.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.tn.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
client2.at.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
client2.at.interfaceTableModule	string		Module path to the InterfaceTable module
client2.at.forwardServiceRegistration	bool	true
client2.at.forwardProtocolRegistration	bool	true
client2.at.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
client2.at.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
client2.at.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch1.macTable.displayStringTextFormat	string	“addr: %a\nvlan: %v”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.macTable.agingTime	double	120s
switch1.macTable.forwardingTable	object	[]
switch1.macTable.forwardingTableFile	string	“”
switch1.macTable.interfaceTableModule	string
switch1.interfaceTable.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.interfaceTable.displayAddresses	bool	false	Whether to display IP addresses on links
switch1.l2NodeConfigurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.l2NodeConfigurator.interfaceTableModule	string
switch1.l2NodeConfigurator.l2ConfiguratorModule	string	“l2NetworkConfigurator”	The absolute path to the L2NetworkConfigurator; use “” if there is no configurator
switch1.status.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.status.initialStatus	string	“UP”	Initial status of the network node
switch1.clock.oscillator.displayStringTextFormat	string	“%c (%n + %d)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.clock.oscillator.emitNumTicksSignal	bool	!parent.useFutureEventSet	Enables emitting a signal at each oscillator tick, can be useful for validating the behavior of the more efficient implementation without events
switch1.clock.oscillator.oscillatorTickEventSchedulingPriority	int	0	Specifies the scheduling priority of the tick event
switch1.clock.oscillator.nominalTickLength	double		Specifies the elapsed time between oscillator ticks
switch1.clock.oscillator.tickOffset	double	0s	Shifts ticks to the past, must be in the range of [0, current tick length)
switch1.clock.oscillator.driftRate	double	0ppm	Constant fractional frequency offset
switch1.clock.underlyingClock.oscillator.displayStringTextFormat	string	“%c (%n + %d)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.clock.underlyingClock.oscillator.emitNumTicksSignal	bool	!parent.useFutureEventSet	Enables emitting a signal at each oscillator tick, can be useful for validating the behavior of the more efficient implementation without events
switch1.clock.underlyingClock.oscillator.oscillatorTickEventSchedulingPriority	int	0	Specifies the scheduling priority of the tick event
switch1.clock.underlyingClock.oscillator.nominalTickLength	double		Specifies the elapsed time between oscillator ticks
switch1.clock.underlyingClock.oscillator.tickOffset	double	0s	Shifts ticks to the past, must be in the range of [0, current tick length)
switch1.clock.underlyingClock.oscillator.driftRate	double	0ppm	Constant fractional frequency offset
switch1.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
switch1.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
switch1.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
switch1.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
switch1.pcapRecorder.fileFormat	string	“pcapng”
switch1.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
switch1.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
switch1.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
switch1.pcapRecorder.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
switch1.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
switch1.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
switch1.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
switch1.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch1.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
switch1.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
switch1.mrp.displayStringTextFormat	string	“role: %r\nnode: %n\nring: %g”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.mrp.linkDetectionDelay	double	truncnormal(385ms,325ms)	Switches do not detect a link change immediately. This parameter sets the simulated delay of a “link down” event. Note: the delay for “link up” is hardcoded to 1us in the code.
switch1.mrp.processingDelay	double	truncnormal(100us,80us)	Switches require a certain amount of time to process each received packet. This parameter sets the processing delay; it is applied in handleMessageWhenUp().
switch1.mrp.timingProfile	int	500ms	MRP defines four Maximum Recovery Time settings for rings: 500 ms, 200 ms, 30 ms, or 10 ms. This parameter sets a hard upper time limit guaranteed by the protocol, and the interval for test frames, topology changes, and link change times are adapted accordingly. It should be set to the same value on all nodes within a ring.
switch1.mrp.mrpRole	string	“disabled”	Each MRP node can either be disabled (value 0, no MRP function), be a MediaRedundancyClient (MRC, value 1), a MediaRedundancyManager (MRM, value 2), or a MediaRedundancyAutoManager (MRA, value 4). The model does not support the backward-compatible MRA (value 3) as it would be redundant. Each network may have only one MRM; all other nodes must assume the MRC role. MRAs can vote on which node should take the MRM role based on priority and MAC address value; other nodes dynamically switch to the MRC role. Mixing MRM and MRA is possible but not recommended.
switch1.mrp.ringPort1	int	0	Each MRP node has exactly two ring interfaces, which must be configured by the network administrator. The ringPort1 and ringPort2 parameters define the port index of the first and second ring port, respectively.
switch1.mrp.ringPort2	int	1
switch1.mrp.uuid0	int		An MRP ring has a UUID, split into two 64-bit parts. Every node in a ring must be configured with the same UUID.
switch1.mrp.uuid1	int
switch1.mrp.enableLinkCheckOnRing	bool	false	It is possible to enable active link checks on Layer 2 for each ring port, using CCM (Connectivity Check Message) messages defined in 802.1q Continuity Fault Management (CFM). Consider the additional load on the node and network when enabling this feature.
switch1.mrp.ccmInterval	double	10ms	CCM (Connectivity Check Message) link checks can be performed every 3.3 ms or every 10 ms.
switch1.mrp.interconnectionRingCheckAware	bool	true	MRP rings can be redundantly connected by interconnection nodes. To manage necessary communication, normal MRP nodes should be aware of the check methods used. Checks can be performed either by ring check (similar to the ring test mechanism) or by link check on Layer 2 (CCM messages).
switch1.mrp.interconnectionLinkCheckAware	bool	true
switch1.mrp.visualize	bool	true	Visualizes the ring by coloring connections in the network graphics. Labels the Ethernet interface with port role and status.
switch1.mrp.interfaceTableModule	string		The path to the InterfaceTable module.
switch1.mrp.macTableModule	string		The path to the MacForwardingTable module.
switch1.mrp.mrpRelayModule	string		The path to the MrpRelay module.
switch1.mrp.mrpPriority	int	0xA000	A MRM or MRA can have a priority ranging from the highest (0x0000) to the lowest (0xFFFF). MRMs should be assigned one of the following values: HIGHEST = 0x0000, HIGH = 0x4000, DEFAULT = 0x8000. If the node is an MRA, assign one of these: MRAHIGHEST = 0x9000, MRADEFAULT = 0xA000, MRALOWEST = 0xFFFF. MRAs determine the acting manager based on priority and MAC address.
switch1.mrp.nonblockingMrcSupported	bool	true	In MRM role: Specifies whether non-blocking MRCs are supported by the MRM, i.e. those that are not capable of setting a ring port to BLOCKED state.
switch1.mrp.reactOnLinkChange	bool	true	In MRM role: Determines if the manager reacts to link change frames sent by clients or if it solely relies on ring tests for status updates.
switch1.stp.helloTime	double
switch1.stp.forwardDelay	double
switch1.stp.maxAge	double
switch1.stp.bridgePriority	int
switch1.stp.visualize	bool
switch1.sc.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.sc.interfaceTableModule	string		Module path to the InterfaceTable module
switch1.sc.forwardServiceRegistration	bool	true
switch1.sc.forwardProtocolRegistration	bool	true
switch1.sc.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch1.sc.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch1.sc.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch1.llc.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.llc.registerProtocol	bool	false	FIXME //KLUDGE should redesign the placement of EthernetEncapsulation and LLC modules
switch1.cb.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.cb.interfaceTableModule	string		Module path to the InterfaceTable module
switch1.cb.forwardServiceRegistration	bool	true
switch1.cb.forwardProtocolRegistration	bool	true
switch1.cb.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch1.cb.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch1.cb.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch1.bridging.displayStringTextFormat	string	“proc: %p\ndisc: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.bridging.macTableModule	string
switch1.bridging.interfaceTableModule	string
switch1.bridging.switchingDelay	double	truncnormal(8.61us,5.42us)	Switches take a certain amount of time for processing each packet. This parameter sets the processsing delay applied before sending packets out.
switch1.bl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.bl.interfaceTableModule	string		Module path to the InterfaceTable module
switch1.bl.forwardServiceRegistration	bool	true
switch1.bl.forwardProtocolRegistration	bool	true
switch1.bl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch1.bl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch1.bl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch1.ethernet.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.ethernet.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
switch1.ethernet.interfaceTableModule	string		The path to the InterfaceTable module
switch1.ethernet.fcsMode	string	“declared”
switch1.ethernet.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
switch1.ethernet.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
switch1.li.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.li.interfaceTableModule	string		Module path to the InterfaceTable module
switch1.li.forwardServiceRegistration	bool	true
switch1.li.forwardProtocolRegistration	bool	true
switch1.li.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch1.li.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch1.li.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch1.eth.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
switch1.eth.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
switch1.eth.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
switch1.eth.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
switch1.eth.pcapRecorder.fileFormat	string	“pcapng”
switch1.eth.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
switch1.eth.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
switch1.eth.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
switch1.eth.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
switch1.eth.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
switch1.eth.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
switch1.eth.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch1.eth.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
switch1.eth.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
switch1.eth.macLayer.queue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.macLayer.queue.packetCapacity	int	-1	Maximum number of packets in the queue, no limit by default
switch1.eth.macLayer.queue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
switch1.eth.macLayer.queue.dropperClass	string	“”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
switch1.eth.macLayer.queue.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
switch1.eth.macLayer.queue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
switch1.eth.macLayer.server.displayStringTextFormat	string	“served %p pk (%l)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.macLayer.server.serveSchedulingPriority	int	0	Specifies the FES scheduling priority for the extra event that is pulling the packet, -1 means no extra event
switch1.eth.macLayer.outboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.macLayer.outboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch1.eth.macLayer.outboundEmitter.direction	string	“undefined”
switch1.eth.macLayer.outboundEmitter.signalName	string
switch1.eth.macLayer.fcsChecker.displayStringTextFormat	string	“dropped {numDroppedPackets}/{numProcessedPackets} pk ({droppedTotalLength}/{processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.macLayer.fcsChecker.backpressure	bool	false
switch1.eth.macLayer.fcsChecker.popFcs	bool	false
switch1.eth.macLayer.inboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.macLayer.inboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch1.eth.macLayer.inboundEmitter.direction	string	“undefined”
switch1.eth.macLayer.inboundEmitter.signalName	string
switch1.eth.phyLayer.phyHeaderInserter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.phyLayer.interFrameGapInserter.displayStringTextFormat	string	“delayed %p pk (%l)\nifg: %g”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.phyLayer.interFrameGapInserter.clockModule	string	“”	Relative path of a module that implements IClock(1,:ref:2 <neddoc-msg-inet-iclock>); optional
switch1.eth.phyLayer.interFrameGapInserter.initialChannelBusy	bool	false	Assume that the channel was busy before the simulation started
switch1.eth.phyLayer.interFrameGapInserter.duration	double	96s / dropUnit(parent.bitrate)
switch1.eth.phyLayer.outboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.phyLayer.outboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch1.eth.phyLayer.outboundEmitter.direction	string	“undefined”
switch1.eth.phyLayer.outboundEmitter.signalName	string
switch1.eth.phyLayer.transmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.phyLayer.transmitter.clockModule	string	“”	Relative path of a module that implements IClock(1,:ref:2 <neddoc-msg-inet-iclock>); optional
switch1.eth.phyLayer.transmitter.datarate	double	parent.bitrate
switch1.eth.phyLayer.phyHeaderChecker.displayStringTextFormat	string	“dropped {numDroppedPackets}/{numProcessedPackets} pk ({droppedTotalLength}/{processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.phyLayer.phyHeaderChecker.backpressure	bool	false
switch1.eth.phyLayer.inboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.phyLayer.inboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch1.eth.phyLayer.inboundEmitter.direction	string	“undefined”
switch1.eth.phyLayer.inboundEmitter.signalName	string
switch1.eth.phyLayer.receiver.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch1.eth.phyLayer.receiver.datarate	double	parent.bitrate
switch2.macTable.displayStringTextFormat	string	“addr: %a\nvlan: %v”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.macTable.agingTime	double	120s
switch2.macTable.forwardingTable	object	[]
switch2.macTable.forwardingTableFile	string	“”
switch2.macTable.interfaceTableModule	string
switch2.interfaceTable.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.interfaceTable.displayAddresses	bool	false	Whether to display IP addresses on links
switch2.l2NodeConfigurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.l2NodeConfigurator.interfaceTableModule	string
switch2.l2NodeConfigurator.l2ConfiguratorModule	string	“l2NetworkConfigurator”	The absolute path to the L2NetworkConfigurator; use “” if there is no configurator
switch2.status.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.status.initialStatus	string	“UP”	Initial status of the network node
switch2.clock.oscillator.displayStringTextFormat	string	“%c (%n + %d)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.clock.oscillator.emitNumTicksSignal	bool	!parent.useFutureEventSet	Enables emitting a signal at each oscillator tick, can be useful for validating the behavior of the more efficient implementation without events
switch2.clock.oscillator.oscillatorTickEventSchedulingPriority	int	0	Specifies the scheduling priority of the tick event
switch2.clock.oscillator.nominalTickLength	double		Specifies the elapsed time between oscillator ticks
switch2.clock.oscillator.tickOffset	double	0s	Shifts ticks to the past, must be in the range of [0, current tick length)
switch2.clock.oscillator.driftRate	double	0ppm	Constant fractional frequency offset
switch2.clock.underlyingClock.oscillator.displayStringTextFormat	string	“%c (%n + %d)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.clock.underlyingClock.oscillator.emitNumTicksSignal	bool	!parent.useFutureEventSet	Enables emitting a signal at each oscillator tick, can be useful for validating the behavior of the more efficient implementation without events
switch2.clock.underlyingClock.oscillator.oscillatorTickEventSchedulingPriority	int	0	Specifies the scheduling priority of the tick event
switch2.clock.underlyingClock.oscillator.nominalTickLength	double		Specifies the elapsed time between oscillator ticks
switch2.clock.underlyingClock.oscillator.tickOffset	double	0s	Shifts ticks to the past, must be in the range of [0, current tick length)
switch2.clock.underlyingClock.oscillator.driftRate	double	0ppm	Constant fractional frequency offset
switch2.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
switch2.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
switch2.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
switch2.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
switch2.pcapRecorder.fileFormat	string	“pcapng”
switch2.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
switch2.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
switch2.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
switch2.pcapRecorder.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
switch2.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
switch2.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
switch2.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
switch2.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch2.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
switch2.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
switch2.mrp.displayStringTextFormat	string	“role: %r\nnode: %n\nring: %g”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.mrp.linkDetectionDelay	double	truncnormal(385ms,325ms)	Switches do not detect a link change immediately. This parameter sets the simulated delay of a “link down” event. Note: the delay for “link up” is hardcoded to 1us in the code.
switch2.mrp.processingDelay	double	truncnormal(100us,80us)	Switches require a certain amount of time to process each received packet. This parameter sets the processing delay; it is applied in handleMessageWhenUp().
switch2.mrp.timingProfile	int	500ms	MRP defines four Maximum Recovery Time settings for rings: 500 ms, 200 ms, 30 ms, or 10 ms. This parameter sets a hard upper time limit guaranteed by the protocol, and the interval for test frames, topology changes, and link change times are adapted accordingly. It should be set to the same value on all nodes within a ring.
switch2.mrp.mrpRole	string	“disabled”	Each MRP node can either be disabled (value 0, no MRP function), be a MediaRedundancyClient (MRC, value 1), a MediaRedundancyManager (MRM, value 2), or a MediaRedundancyAutoManager (MRA, value 4). The model does not support the backward-compatible MRA (value 3) as it would be redundant. Each network may have only one MRM; all other nodes must assume the MRC role. MRAs can vote on which node should take the MRM role based on priority and MAC address value; other nodes dynamically switch to the MRC role. Mixing MRM and MRA is possible but not recommended.
switch2.mrp.ringPort1	int	0	Each MRP node has exactly two ring interfaces, which must be configured by the network administrator. The ringPort1 and ringPort2 parameters define the port index of the first and second ring port, respectively.
switch2.mrp.ringPort2	int	1
switch2.mrp.uuid0	int		An MRP ring has a UUID, split into two 64-bit parts. Every node in a ring must be configured with the same UUID.
switch2.mrp.uuid1	int
switch2.mrp.enableLinkCheckOnRing	bool	false	It is possible to enable active link checks on Layer 2 for each ring port, using CCM (Connectivity Check Message) messages defined in 802.1q Continuity Fault Management (CFM). Consider the additional load on the node and network when enabling this feature.
switch2.mrp.ccmInterval	double	10ms	CCM (Connectivity Check Message) link checks can be performed every 3.3 ms or every 10 ms.
switch2.mrp.interconnectionRingCheckAware	bool	true	MRP rings can be redundantly connected by interconnection nodes. To manage necessary communication, normal MRP nodes should be aware of the check methods used. Checks can be performed either by ring check (similar to the ring test mechanism) or by link check on Layer 2 (CCM messages).
switch2.mrp.interconnectionLinkCheckAware	bool	true
switch2.mrp.visualize	bool	true	Visualizes the ring by coloring connections in the network graphics. Labels the Ethernet interface with port role and status.
switch2.mrp.interfaceTableModule	string		The path to the InterfaceTable module.
switch2.mrp.macTableModule	string		The path to the MacForwardingTable module.
switch2.mrp.mrpRelayModule	string		The path to the MrpRelay module.
switch2.mrp.mrpPriority	int	0xA000	A MRM or MRA can have a priority ranging from the highest (0x0000) to the lowest (0xFFFF). MRMs should be assigned one of the following values: HIGHEST = 0x0000, HIGH = 0x4000, DEFAULT = 0x8000. If the node is an MRA, assign one of these: MRAHIGHEST = 0x9000, MRADEFAULT = 0xA000, MRALOWEST = 0xFFFF. MRAs determine the acting manager based on priority and MAC address.
switch2.mrp.nonblockingMrcSupported	bool	true	In MRM role: Specifies whether non-blocking MRCs are supported by the MRM, i.e. those that are not capable of setting a ring port to BLOCKED state.
switch2.mrp.reactOnLinkChange	bool	true	In MRM role: Determines if the manager reacts to link change frames sent by clients or if it solely relies on ring tests for status updates.
switch2.stp.helloTime	double
switch2.stp.forwardDelay	double
switch2.stp.maxAge	double
switch2.stp.bridgePriority	int
switch2.stp.visualize	bool
switch2.sc.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.sc.interfaceTableModule	string		Module path to the InterfaceTable module
switch2.sc.forwardServiceRegistration	bool	true
switch2.sc.forwardProtocolRegistration	bool	true
switch2.sc.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.sc.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.sc.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.llc.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.llc.registerProtocol	bool	false	FIXME //KLUDGE should redesign the placement of EthernetEncapsulation and LLC modules
switch2.cb.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.cb.interfaceTableModule	string		Module path to the InterfaceTable module
switch2.cb.forwardServiceRegistration	bool	true
switch2.cb.forwardProtocolRegistration	bool	true
switch2.cb.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.cb.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.cb.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.bridging.displayStringTextFormat	string	“proc: %p\ndisc: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.bridging.macTableModule	string
switch2.bridging.interfaceTableModule	string
switch2.bridging.switchingDelay	double	truncnormal(8.61us,5.42us)	Switches take a certain amount of time for processing each packet. This parameter sets the processsing delay applied before sending packets out.
switch2.bl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.bl.interfaceTableModule	string		Module path to the InterfaceTable module
switch2.bl.forwardServiceRegistration	bool	true
switch2.bl.forwardProtocolRegistration	bool	true
switch2.bl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.bl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.bl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.ethernet.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.ethernet.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
switch2.ethernet.interfaceTableModule	string		The path to the InterfaceTable module
switch2.ethernet.fcsMode	string	“declared”
switch2.ethernet.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
switch2.ethernet.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
switch2.li.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.li.interfaceTableModule	string		Module path to the InterfaceTable module
switch2.li.forwardServiceRegistration	bool	true
switch2.li.forwardProtocolRegistration	bool	true
switch2.li.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
switch2.li.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
switch2.li.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
switch2.eth.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
switch2.eth.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
switch2.eth.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
switch2.eth.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
switch2.eth.pcapRecorder.fileFormat	string	“pcapng”
switch2.eth.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
switch2.eth.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
switch2.eth.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
switch2.eth.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
switch2.eth.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
switch2.eth.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
switch2.eth.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch2.eth.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
switch2.eth.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
switch2.eth.macLayer.queue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.macLayer.queue.packetCapacity	int	-1	Maximum number of packets in the queue, no limit by default
switch2.eth.macLayer.queue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
switch2.eth.macLayer.queue.dropperClass	string	“”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
switch2.eth.macLayer.queue.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
switch2.eth.macLayer.queue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
switch2.eth.macLayer.server.displayStringTextFormat	string	“served %p pk (%l)”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.macLayer.server.serveSchedulingPriority	int	0	Specifies the FES scheduling priority for the extra event that is pulling the packet, -1 means no extra event
switch2.eth.macLayer.outboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.macLayer.outboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch2.eth.macLayer.outboundEmitter.direction	string	“undefined”
switch2.eth.macLayer.outboundEmitter.signalName	string
switch2.eth.macLayer.fcsChecker.displayStringTextFormat	string	“dropped {numDroppedPackets}/{numProcessedPackets} pk ({droppedTotalLength}/{processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.macLayer.fcsChecker.backpressure	bool	false
switch2.eth.macLayer.fcsChecker.popFcs	bool	false
switch2.eth.macLayer.inboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.macLayer.inboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch2.eth.macLayer.inboundEmitter.direction	string	“undefined”
switch2.eth.macLayer.inboundEmitter.signalName	string
switch2.eth.phyLayer.phyHeaderInserter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.phyLayer.interFrameGapInserter.displayStringTextFormat	string	“delayed %p pk (%l)\nifg: %g”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.phyLayer.interFrameGapInserter.clockModule	string	“”	Relative path of a module that implements IClock(1,:ref:2 <neddoc-msg-inet-iclock>); optional
switch2.eth.phyLayer.interFrameGapInserter.initialChannelBusy	bool	false	Assume that the channel was busy before the simulation started
switch2.eth.phyLayer.interFrameGapInserter.duration	double	96s / dropUnit(parent.bitrate)
switch2.eth.phyLayer.outboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.phyLayer.outboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch2.eth.phyLayer.outboundEmitter.direction	string	“undefined”
switch2.eth.phyLayer.outboundEmitter.signalName	string
switch2.eth.phyLayer.transmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.phyLayer.transmitter.clockModule	string	“”	Relative path of a module that implements IClock(1,:ref:2 <neddoc-msg-inet-iclock>); optional
switch2.eth.phyLayer.transmitter.datarate	double	parent.bitrate
switch2.eth.phyLayer.phyHeaderChecker.displayStringTextFormat	string	“dropped {numDroppedPackets}/{numProcessedPackets} pk ({droppedTotalLength}/{processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.phyLayer.phyHeaderChecker.backpressure	bool	false
switch2.eth.phyLayer.inboundEmitter.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.phyLayer.inboundEmitter.packetFilter	object	“*”	Which packets are considered, matches all packets by default
switch2.eth.phyLayer.inboundEmitter.direction	string	“undefined”
switch2.eth.phyLayer.inboundEmitter.signalName	string
switch2.eth.phyLayer.receiver.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
switch2.eth.phyLayer.receiver.datarate	double	parent.bitrate
server1.status.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.status.initialStatus	string	“UP”	Initial status of the network node
server1.environment.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.environment.initStage	int	0	Initialization stage for the setup command
server1.environment.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
server1.environment.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
server1.environment.setupCommand	string	“”	A host OS system command
server1.environment.teardownCommand	string	“”	A host OS system command
server1.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server1.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server1.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server1.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server1.pcapRecorder.fileFormat	string	“pcapng”
server1.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server1.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server1.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server1.pcapRecorder.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
server1.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server1.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server1.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server1.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server1.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server1.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server1.interfaceTable.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.interfaceTable.displayAddresses	bool	false	Whether to display IP addresses on links
server1.cb.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.cb.interfaceTableModule	string		Module path to the InterfaceTable module
server1.cb.forwardServiceRegistration	bool	true
server1.cb.forwardProtocolRegistration	bool	true
server1.cb.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.cb.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.cb.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.bl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.bl.interfaceTableModule	string		Module path to the InterfaceTable module
server1.bl.forwardServiceRegistration	bool	true
server1.bl.forwardProtocolRegistration	bool	true
server1.bl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.bl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.bl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.ethernet.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ethernet.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
server1.ethernet.interfaceTableModule	string		The path to the InterfaceTable module
server1.ethernet.fcsMode	string	“declared”
server1.ethernet.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
server1.ethernet.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
server1.li.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.li.interfaceTableModule	string		Module path to the InterfaceTable module
server1.li.forwardServiceRegistration	bool	true
server1.li.forwardProtocolRegistration	bool	true
server1.li.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.li.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.li.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.lo.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.lo.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server1.lo.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server1.lo.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server1.lo.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server1.lo.pcapRecorder.fileFormat	string	“pcapng”
server1.lo.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server1.lo.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server1.lo.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server1.lo.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server1.lo.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server1.lo.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server1.lo.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server1.lo.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server1.lo.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server1.lo.lo.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.lo.lo.interfaceTableModule	string		The path to the InterfaceTable module
server1.lo.lo.mtu	int	4470B
server1.wlan.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server1.wlan.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server1.wlan.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server1.wlan.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server1.wlan.pcapRecorder.fileFormat	string	“pcapng”
server1.wlan.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server1.wlan.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server1.wlan.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server1.wlan.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server1.wlan.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server1.wlan.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server1.wlan.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server1.wlan.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server1.wlan.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server1.wlan.mib.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.agent.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.agent.interfaceTableModule	string		The path to the InterfaceTable module
server1.wlan.agent.mibModule	string
server1.wlan.agent.activeScan	bool	true	Selects between active and passive scanning
server1.wlan.agent.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
server1.wlan.agent.probeDelay	double	100ms	Delay before sending a probe request during active scanning
server1.wlan.agent.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
server1.wlan.agent.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
server1.wlan.agent.authenticationTimeout	double	5s	Timeout for the authentication procedure
server1.wlan.agent.associationTimeout	double	5s	Timeout for the association procedure
server1.wlan.agent.startingTime	double	-1s	Agent starting time.
server1.wlan.agent.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
server1.wlan.mgmt.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mgmt.interfaceTableModule	string		The path to the InterfaceTable module
server1.wlan.mgmt.numChannels	int	1	Number of channels to scan
server1.wlan.mgmt.mibModule	string
server1.wlan.mgmt.macModule	string		The path to the MAC module
server1.wlan.mac.dcf.channelAccess.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.channelAccess.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
server1.wlan.mac.dcf.channelAccess.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server1.wlan.mac.dcf.channelAccess.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server1.wlan.mac.dcf.channelAccess.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server1.wlan.mac.dcf.channelAccess.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server1.wlan.mac.dcf.channelAccess.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.channelAccess.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
server1.wlan.mac.dcf.channelAccess.inProgressFrames.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
server1.wlan.mac.dcf.channelAccess.inProgressFrames.ackHandlerModule	string	“^.^.ackHandler”
server1.wlan.mac.dcf.channelAccess.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.channelAccess.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
server1.wlan.mac.dcf.channelAccess.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
server1.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
server1.wlan.mac.dcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.rateSelection.multicastFrameBitrate	double	-1bps
server1.wlan.mac.dcf.rateSelection.responseAckFrameBitrate	double	-1bps
server1.wlan.mac.dcf.rateSelection.responseCtsFrameBitrate	double	-1bps
server1.wlan.mac.dcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
server1.wlan.mac.dcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
server1.wlan.mac.dcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
server1.wlan.mac.dcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
server1.wlan.mac.dcf.rateSelection.controlFrameBitrate	double	-1bps
server1.wlan.mac.dcf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.recoveryProcedure.shortRetryLimit	int	7
server1.wlan.mac.dcf.recoveryProcedure.longRetryLimit	int	4
server1.wlan.mac.dcf.originatorProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.originatorProtectionMechanism.rateSelectionModule	string
server1.wlan.mac.dcf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.originatorAckPolicy.rateSelectionModule	string
server1.wlan.mac.dcf.originatorAckPolicy.ackTimeout	double	-1s
server1.wlan.mac.dcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.recipientAckPolicy.rateSelectionModule	string
server1.wlan.mac.dcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.rtsPolicy.rateSelectionModule	string
server1.wlan.mac.dcf.rtsPolicy.ctsTimeout	double	-1s
server1.wlan.mac.dcf.rtsPolicy.rtsThreshold	int	2346B
server1.wlan.mac.dcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.dcf.ctsPolicy.rxModule	string
server1.wlan.mac.dcf.ctsPolicy.rateSelectionModule	string
server1.wlan.mac.hcf.edca.edcaf.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.edcaf.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
server1.wlan.mac.hcf.edca.edcaf.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server1.wlan.mac.hcf.edca.edcaf.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server1.wlan.mac.hcf.edca.edcaf.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server1.wlan.mac.hcf.edca.edcaf.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server1.wlan.mac.hcf.edca.edcaf.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.edcaf.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
server1.wlan.mac.hcf.edca.edcaf.inProgressFrames.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
server1.wlan.mac.hcf.edca.edcaf.inProgressFrames.ackHandlerModule	string	“^.ackHandler”
server1.wlan.mac.hcf.edca.edcaf.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.edcaf.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
server1.wlan.mac.hcf.edca.edcaf.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
server1.wlan.mac.hcf.edca.edcaf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.edcaf.txopProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.edcaf.txopProcedure.txopLimit	double	-1s
server1.wlan.mac.hcf.edca.edcaf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.edcaf.recoveryProcedure.shortRetryLimit	int	7
server1.wlan.mac.hcf.edca.edcaf.recoveryProcedure.longRetryLimit	int	4
server1.wlan.mac.hcf.edca.collisionController.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.shortRetryLimit	int	7
server1.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.longRetryLimit	int	4
server1.wlan.mac.hcf.hcca.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
server1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
server1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.maxAMsduSize	int	4065	-1 means infinity
server1.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
server1.wlan.mac.hcf.originatorMacDataService.mpduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
server1.wlan.mac.hcf.singleProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.singleProtectionMechanism.rateSelectionModule	string
server1.wlan.mac.hcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.rateSelection.multicastFrameBitrate	double	-1bps
server1.wlan.mac.hcf.rateSelection.responseAckFrameBitrate	double	-1bps
server1.wlan.mac.hcf.rateSelection.responseBlockAckFrameBitrate	double	-1bps
server1.wlan.mac.hcf.rateSelection.responseCtsFrameBitrate	double	-1bps
server1.wlan.mac.hcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
server1.wlan.mac.hcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
server1.wlan.mac.hcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
server1.wlan.mac.hcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
server1.wlan.mac.hcf.rateSelection.controlFrameBitrate	double	-1bps
server1.wlan.mac.hcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.originatorAckPolicy.rateSelectionModule	string
server1.wlan.mac.hcf.originatorAckPolicy.blockAckReqThreshold	int	5
server1.wlan.mac.hcf.originatorAckPolicy.maxBlockAckPolicyFrameLength	int	1000B
server1.wlan.mac.hcf.originatorAckPolicy.blockAckTimeout	double	-1s
server1.wlan.mac.hcf.originatorAckPolicy.ackTimeout	double	-1s
server1.wlan.mac.hcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.recipientAckPolicy.rateSelectionModule	string
server1.wlan.mac.hcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.rtsPolicy.rateSelectionModule	string
server1.wlan.mac.hcf.rtsPolicy.ctsTimeout	double	-1s
server1.wlan.mac.hcf.rtsPolicy.rtsThreshold	int	2346B
server1.wlan.mac.hcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.ctsPolicy.rxModule	string
server1.wlan.mac.hcf.ctsPolicy.rateSelectionModule	string
server1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
server1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.aMsduSupported	bool	true
server1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
server1.wlan.mac.hcf.originatorBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
server1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
server1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.aMsduSupported	bool	true
server1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
server1.wlan.mac.hcf.recipientBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
server1.wlan.mac.ds.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.ds.mibModule	string
server1.wlan.mac.rx.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.tx.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.wlan.mac.tx.rxModule	string
server1.ppp.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ppp.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server1.ppp.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server1.ppp.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server1.ppp.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server1.ppp.pcapRecorder.fileFormat	string	“pcapng”
server1.ppp.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server1.ppp.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server1.ppp.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server1.ppp.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server1.ppp.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server1.ppp.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server1.ppp.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server1.ppp.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server1.ppp.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server1.ppp.queue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ppp.queue.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
server1.ppp.queue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server1.ppp.queue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server1.ppp.queue.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server1.ppp.queue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server1.ppp.ppp.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ppp.ppp.interfaceTableModule	string		The path to the InterfaceTable module
server1.ppp.ppp.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
server1.ppp.ppp.mtu	int	4470B
server1.ppp.ppp.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
server1.ppp.ppp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
server1.eth.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.eth.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server1.eth.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server1.eth.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server1.eth.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server1.eth.pcapRecorder.fileFormat	string	“pcapng”
server1.eth.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server1.eth.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server1.eth.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server1.eth.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server1.eth.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server1.eth.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server1.eth.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server1.eth.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server1.eth.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server1.tun.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.tun.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server1.tun.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server1.tun.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server1.tun.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server1.tun.pcapRecorder.fileFormat	string	“pcapng”
server1.tun.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server1.tun.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server1.tun.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server1.tun.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server1.tun.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server1.tun.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server1.tun.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server1.tun.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server1.tun.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server1.tun.tun.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.tun.tun.interfaceTableModule	string		The path to the InterfaceTable module
server1.tun.tun.mtu	int	1500B
server1.virt.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.virt.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server1.virt.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server1.virt.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server1.virt.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server1.virt.pcapRecorder.fileFormat	string	“pcapng”
server1.virt.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server1.virt.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server1.virt.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server1.virt.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server1.virt.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server1.virt.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server1.virt.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server1.virt.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server1.virt.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server1.virt.tunnel.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.virt.tunnel.interfaceTableModule	string
server1.virt.tunnel.realInterface	string
server1.virt.tunnel.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
server1.virt.tunnel.address	string	“copy”
server1.virt.tunnel.vlanId	int	-1
server1.virt.tunnel.steal	bool	vlanId != -1
server1.ipv4.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.configurator.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv4.configurator.routingTableModule	string
server1.ipv4.configurator.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
server1.ipv4.configurator.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
server1.ipv4.routingTable.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv4.routingTable.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
server1.ipv4.routingTable.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
server1.ipv4.routingTable.forwarding	bool	true	Turns IP forwarding on/off
server1.ipv4.routingTable.multicastForwarding	bool	false	Turns multicast forwarding on/off
server1.ipv4.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
server1.ipv4.routingTable.routingFile	string	“”	Routing table file name
server1.ipv4.natTable.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.natTable.networkProtocolModule	string	“^.ip”
server1.ipv4.natTable.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
server1.ipv4.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.up.interfaceTableModule	string		Module path to the InterfaceTable module
server1.ipv4.up.forwardServiceRegistration	bool	true
server1.ipv4.up.forwardProtocolRegistration	bool	true
server1.ipv4.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.ipv4.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.ipv4.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.ipv4.igmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.igmp.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv4.igmp.routingTableModule	string
server1.ipv4.igmp.checksumMode	string	“declared”
server1.ipv4.igmp.enabled	bool	true
server1.ipv4.igmp.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
server1.ipv4.igmp.queryInterval	double	125s
server1.ipv4.igmp.queryResponseInterval	double	10s
server1.ipv4.igmp.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
server1.ipv4.igmp.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
server1.ipv4.igmp.startupQueryInterval	double	queryInterval / 4
server1.ipv4.igmp.startupQueryCount	int	robustnessVariable
server1.ipv4.igmp.lastMemberQueryInterval	double	1s
server1.ipv4.igmp.lastMemberQueryCount	int	robustnessVariable
server1.ipv4.igmp.unsolicitedReportInterval	double	10s
server1.ipv4.icmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.icmp.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv4.icmp.routingTableModule	string
server1.ipv4.icmp.checksumMode	string	“declared”
server1.ipv4.icmp.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
server1.ipv4.mp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.mp.interfaceTableModule	string		Module path to the InterfaceTable module
server1.ipv4.mp.forwardServiceRegistration	bool	true
server1.ipv4.mp.forwardProtocolRegistration	bool	true
server1.ipv4.mp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.ipv4.mp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.ipv4.mp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.ipv4.ip.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.ip.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv4.ip.routingTableModule	string
server1.ipv4.ip.arpModule	string
server1.ipv4.ip.icmpModule	string
server1.ipv4.ip.checksumMode	string	“declared”
server1.ipv4.ip.timeToLive	int	32
server1.ipv4.ip.multicastTimeToLive	int	32
server1.ipv4.ip.fragmentTimeout	double	60s
server1.ipv4.ip.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
server1.ipv4.ip.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
server1.ipv4.ip.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
server1.ipv4.ip.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
server1.ipv4.ip.maxLifetime	double	-1s	Packets older than the limit are discarded
server1.ipv4.arp.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.arp.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv4.arp.routingTableModule	string
server1.ipv4.arp.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
server1.ipv4.arp.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
server1.ipv4.arp.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
server1.ipv4.arp.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
server1.ipv4.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.ipsec.networkProtocolModule	string	“^.ip”
server1.ipv4.ipsec.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
server1.ipv4.ipsec.interfaceTableModule	string
server1.ipv4.ipsec.spdModule	string	“^.spd”
server1.ipv4.ipsec.sadModule	string	“^.sad”
server1.ipv4.ipsec.spdConfig	xml
server1.ipv4.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
server1.ipv4.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
server1.ipv4.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
server1.ipv4.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
server1.ipv4.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
server1.ipv4.ipsec.ahProtectOutDelay	double	0.0s
server1.ipv4.ipsec.ahProtectInDelay	double	0.0s
server1.ipv4.ipsec.espProtectOutDelay	double	0.0s
server1.ipv4.ipsec.espProtectInDelay	double	0.0s
server1.ipv4.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv4.lp.interfaceTableModule	string		Module path to the InterfaceTable module
server1.ipv4.lp.forwardServiceRegistration	bool	true
server1.ipv4.lp.forwardProtocolRegistration	bool	true
server1.ipv4.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.ipv4.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.ipv4.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.ipv6.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.configurator.interfaceTableModule	string
server1.ipv6.configurator.routingTableModule	string
server1.ipv6.configurator.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
server1.ipv6.configurator.configureRoutingTable	bool	true
server1.ipv6.routingTable.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv6.routingTable.routes	xml	xml(“<routingTable/>”)
server1.ipv6.routingTable.forwarding	bool	false
server1.ipv6.routingTable.isRouter	bool	this.forwarding
server1.ipv6.routingTable.multicastForwarding	bool	false
server1.ipv6.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
server1.ipv6.routingTable.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
server1.ipv6.routingTable.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
server1.ipv6.routingTable.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
server1.ipv6.routingTable.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
server1.ipv6.routingTable.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
server1.ipv6.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.up.interfaceTableModule	string		Module path to the InterfaceTable module
server1.ipv6.up.forwardServiceRegistration	bool	true
server1.ipv6.up.forwardProtocolRegistration	bool	true
server1.ipv6.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.ipv6.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.ipv6.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.ipv6.icmpv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.icmpv6.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv6.icmpv6.checksumMode	string	“declared”
server1.ipv6.icmpv6.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
server1.ipv6.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.lp.interfaceTableModule	string		Module path to the InterfaceTable module
server1.ipv6.lp.forwardServiceRegistration	bool	true
server1.ipv6.lp.forwardProtocolRegistration	bool	true
server1.ipv6.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.ipv6.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.ipv6.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.ipv6.neighbourDiscovery.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.neighbourDiscovery.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv6.neighbourDiscovery.checksumMode	string	“declared”
server1.ipv6.neighbourDiscovery.icmpv6Module	string
server1.ipv6.neighbourDiscovery.mipv6Module	string
server1.ipv6.neighbourDiscovery.routingTableModule	string
server1.ipv6.neighbourDiscovery.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
server1.ipv6.neighbourDiscovery.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
server1.ipv6.neighbourDiscovery.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
server1.ipv6.neighbourDiscovery.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
server1.ipv6.neighbourDiscovery.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
server1.ipv6.neighbourDiscovery.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
server1.ipv6.neighbourDiscovery.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
server1.ipv6.neighbourDiscovery.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
server1.ipv6.neighbourDiscovery.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
server1.ipv6.neighbourDiscovery.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
server1.ipv6.ipv6.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.ipv6.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv6.ipv6.routingTableModule	string
server1.ipv6.ipv6.ipv6NeighbourDiscoveryModule	string
server1.ipv6.ipv6.icmpv6Module	string
server1.ipv6.ipv6.procDelay	double	0s
server1.ipv6.ipv6.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
server1.ipv6.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.ipsec.interfaceTableModule	string
server1.ipv6.ipsec.spdModule	string	“^.spd”
server1.ipv6.ipsec.sadModule	string	“^.sad”
server1.ipv6.ipsec.spdConfig	xml
server1.ipv6.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
server1.ipv6.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
server1.ipv6.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
server1.ipv6.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
server1.ipv6.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
server1.ipv6.ipsec.ahProtectOutDelay	double	0.0s
server1.ipv6.ipsec.ahProtectInDelay	double	0.0s
server1.ipv6.ipsec.espProtectOutDelay	double	0.0s
server1.ipv6.ipsec.espProtectInDelay	double	0.0s
server1.ipv6.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.mipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.mipv6.interfaceTableModule	string		The path to the InterfaceTable module
server1.ipv6.mipv6.ipv6NeighbourDiscoveryModule	string
server1.ipv6.mipv6.bindingUpdateListModule	string
server1.ipv6.mipv6.bindingCacheModule	string
server1.ipv6.mipv6.isHomeAgent	bool
server1.ipv6.mipv6.isMobileNode	bool
server1.ipv6.mipv6.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
server1.ipv6.mipv6.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
server1.ipv6.mipv6.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
server1.ipv6.buList.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.bindingCache.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.pmipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.pmipv6.interfaceTableModule	string		path to the InterfaceTable module
server1.ipv6.pmipv6.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
server1.ipv6.pmipv6.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
server1.ipv6.pmipv6.isMobileAccessGateway	bool	false
server1.ipv6.pmipv6.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
server1.ipv6.pmipv6.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
server1.ipv6.pmipv6.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
server1.ipv6.pmipv6.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
server1.ipv6.pmipv6.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
server1.ipv6.mld.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.ipv6.mld.interfaceTableModule	string		path to the InterfaceTable module
server1.ipv6.mld.routingTableModule	string		path to the Ipv6RoutingTable module
server1.ipv6.mld.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
server1.ipv6.mld.enabled	bool	true	when false, MLD is inert on this node (see above)
server1.ipv6.mld.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
server1.ipv6.mld.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
server1.ipv6.mld.queryInterval	double	125s	querier: interval between periodic General Queries
server1.ipv6.mld.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
server1.ipv6.mld.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
server1.ipv6.mld.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
server1.ipv6.mld.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
server1.ipv6.mld.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
server1.ipv6.mld.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
server1.nl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.nl.interfaceTableModule	string		Module path to the InterfaceTable module
server1.nl.forwardServiceRegistration	bool	true
server1.nl.forwardProtocolRegistration	bool	true
server1.nl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.nl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.nl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.udp.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.udp.interfaceTableModule	string		The path to the InterfaceTable module
server1.udp.checksumMode	string	“declared”
server1.udp.defaultMulticastLoop	bool	true
server1.tcp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.tcp.checksumMode	string	“declared”
server1.tcp.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
server1.tcp.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
server1.tcp.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
server1.tcp.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
server1.tcp.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
server1.tcp.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
server1.tcp.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
server1.tcp.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
server1.tcp.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
server1.tcp.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
server1.tcp.msl	int	120s	Maximum Segment Lifetime
server1.tcp.tcpAlgorithmClass	string	“TcpReno”
server1.tcp.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
server1.tcp.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
server1.tcp.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
server1.tcp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
server1.tcp.ecnWillingness	bool	false	True if willing to use ECN
server1.tcp.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
server1.tcp.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
server1.tcp.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
server1.sctp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.sctp.interfaceTableModule	string
server1.sctp.routingTableModule	string
server1.sctp.checksumMode	string	“declared”
server1.sctp.numGapReports	int	3
server1.sctp.rtoInitial	double	3s
server1.sctp.rtoMin	double	1s
server1.sctp.rtoMax	double	60s
server1.sctp.rtoAlpha	double	0.125
server1.sctp.rtoBeta	double	0.250
server1.sctp.maxBurst	int	4
server1.sctp.maxBurstVariant	string	“maxBurst”
server1.sctp.initialWindow	int	0
server1.sctp.assocMaxRetrans	int	10
server1.sctp.pathMaxRetrans	int	5
server1.sctp.maxInitRetrans	int	8
server1.sctp.sackPeriod	double	200ms
server1.sctp.sackFrequency	int	2
server1.sctp.reactivatePrimaryPath	bool	false
server1.sctp.sendQueueLimit	int	0
server1.sctp.validCookieLifetime	double	10s
server1.sctp.enableHeartbeats	bool	true
server1.sctp.hbInterval	double	30s
server1.sctp.sendHeartbeatsOnActivePaths	bool	false
server1.sctp.nagleEnabled	bool	true
server1.sctp.naglePoint	int	1468
server1.sctp.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
server1.sctp.fastRecoverySupported	bool	true
server1.sctp.sctpAlgorithmClass	string	“SctpAlg”
server1.sctp.ccModule	int	0	RFC4960=0
server1.sctp.osbWithHeader	bool	false
server1.sctp.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
server1.sctp.ssModule	int	0	ROUND_ROBIN=0
server1.sctp.arwnd	int	65535
server1.sctp.swsLimit	int	3000	Limit for SWS
server1.sctp.udpEncapsEnabled	bool	false
server1.sctp.natFriendly	bool	false
server1.sctp.bytesToAddPerRcvdChunk	int	0	For flow control
server1.sctp.bytesToAddPerPeerChunk	int	0	For flow control
server1.sctp.tellArwnd	bool	false	For flow control
server1.sctp.messageAcceptLimit	int	0	For flow control
server1.sctp.fairStart	double	0s
server1.sctp.fairStop	double	0s
server1.sctp.streamsToPaths	string	“”
server1.sctp.startEndToEndDelay	int	0
server1.sctp.stopEndToEndDelay	int	10
server1.sctp.throughputInterval	double	1
server1.sctp.auth	bool	false
server1.sctp.chunks	string	“”
server1.sctp.padding	bool	false
server1.sctp.addIP	bool	false
server1.sctp.addTime	double	0s
server1.sctp.addAddress	string	“”
server1.sctp.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
server1.sctp.packetDrop	bool	false
server1.sctp.sackNow	bool	false
server1.sctp.highSpeedCC	bool	false
server1.sctp.checkSackSeqNumber	bool	false
server1.sctp.nrSack	bool	false
server1.sctp.disableReneging	bool	false
server1.sctp.gapReportLimit	int	100000000
server1.sctp.gapListOptimizationVariant	string	“none”
server1.sctp.smartOverfullSACKHandling	bool	false
server1.sctp.allowQoSTracking	bool	false
server1.sctp.qosTrackingInterval	double	1.0s
server1.sctp.cmtSendAllVariant	string	“normal”
server1.sctp.cmtRetransmissionVariant	string	“normal”
server1.sctp.cmtCUCVariant	string	“normal”
server1.sctp.cmtBufferSplitVariant	string	“none”
server1.sctp.cmtBufferSplittingUsesOSB	bool	false
server1.sctp.cmtUseSFR	bool	true
server1.sctp.cmtUseDAC	bool	true
server1.sctp.cmtUseFRC	bool	true
server1.sctp.cmtSmartT3Reset	bool	true
server1.sctp.cmtSmartFastRTX	bool	true
server1.sctp.cmtSmartReneging	bool	false
server1.sctp.cmtSlowPathRTTUpdate	bool	false
server1.sctp.cmtChunkReschedulingVariant	string	“none”
server1.sctp.cmtChunkReschedulingThreshold	double	0.5
server1.sctp.cmtMovedChunksReduceCwnd	bool	true
server1.sctp.movedChunkFastRTXFactor	double	2.0
server1.sctp.cmtSackPath	string	“standard”
server1.sctp.strictCwndBooking	bool	false
server1.sctp.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
server1.sctp.cmtCCPathGroups	string	“”
server1.sctp.rpPathBlocking	bool	false
server1.sctp.rpScaleBlockingTimeout	bool	false
server1.sctp.rpMinCwnd	int	1
server1.quic.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.quic.routingTableModule	string		Set by StandardHost.
server1.quic.sendZeroRttTokenAsServer	bool	false
server1.quic.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
server1.quic.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
server1.quic.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
server1.quic.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
server1.quic.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
server1.quic.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
server1.quic.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
server1.quic.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
server1.quic.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
server1.quic.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
server1.quic.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
server1.quic.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
server1.quic.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
server1.quic.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
server1.quic.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
server1.quic.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
server1.quic.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
server1.quic.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
server1.quic.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
server1.quic.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
server1.quic.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
server1.quic.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
server1.quic.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
server1.quic.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
server1.quic.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
server1.quic.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
server1.quic.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
server1.quic.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
server1.quic.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
server1.tn.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.tn.interfaceTableModule	string		Module path to the InterfaceTable module
server1.tn.forwardServiceRegistration	bool	true
server1.tn.forwardProtocolRegistration	bool	true
server1.tn.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.tn.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.tn.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server1.at.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server1.at.interfaceTableModule	string		Module path to the InterfaceTable module
server1.at.forwardServiceRegistration	bool	true
server1.at.forwardProtocolRegistration	bool	true
server1.at.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server1.at.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server1.at.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.status.displayStringTextFormat	string	“{stateStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.status.initialStatus	string	“UP”	Initial status of the network node
server2.environment.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.environment.initStage	int	0	Initialization stage for the setup command
server2.environment.globalNamespace	bool	false	Create new network namespaces under /var/run/netns/ (Linux only)
server2.environment.namespace	string	“”	Name of the host OS network namespace (optional) (Linux only)
server2.environment.setupCommand	string	“”	A host OS system command
server2.environment.teardownCommand	string	“”	A host OS system command
server2.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server2.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server2.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server2.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server2.pcapRecorder.fileFormat	string	“pcapng”
server2.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server2.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server2.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server2.pcapRecorder.moduleNamePatterns	string	“wlan[] eth[] ppp[*]”	Space-separated list of sibling module names to listen on
server2.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server2.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server2.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server2.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server2.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server2.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server2.interfaceTable.displayStringTextFormat	string	“{numInterfaces} interfaces”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.interfaceTable.displayAddresses	bool	false	Whether to display IP addresses on links
server2.cb.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.cb.interfaceTableModule	string		Module path to the InterfaceTable module
server2.cb.forwardServiceRegistration	bool	true
server2.cb.forwardProtocolRegistration	bool	true
server2.cb.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.cb.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.cb.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.bl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.bl.interfaceTableModule	string		Module path to the InterfaceTable module
server2.bl.forwardServiceRegistration	bool	true
server2.bl.forwardProtocolRegistration	bool	true
server2.bl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.bl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.bl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.ethernet.displayStringTextFormat	string	“passed up: {totalFromMAC}\nsent: {totalFromHigherLayer}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ethernet.registerProtocol	bool	false	FIXME //KLUDGE should redesign place of EthernetEncapsulation and LLC modules
server2.ethernet.interfaceTableModule	string		The path to the InterfaceTable module
server2.ethernet.fcsMode	string	“declared”
server2.ethernet.stopOperationExtraTime	double	-1s	Extra time after the lifecycle stop operation has finished
server2.ethernet.stopOperationTimeout	double	2s	Timeout value for the lifecycle stop operation
server2.li.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.li.interfaceTableModule	string		Module path to the InterfaceTable module
server2.li.forwardServiceRegistration	bool	true
server2.li.forwardProtocolRegistration	bool	true
server2.li.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.li.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.li.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.lo.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.lo.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server2.lo.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server2.lo.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server2.lo.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server2.lo.pcapRecorder.fileFormat	string	“pcapng”
server2.lo.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server2.lo.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server2.lo.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server2.lo.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server2.lo.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server2.lo.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server2.lo.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server2.lo.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server2.lo.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server2.lo.lo.displayStringTextFormat	string	“rcv:{numRcvdOK} snt:{numSent}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.lo.lo.interfaceTableModule	string		The path to the InterfaceTable module
server2.lo.lo.mtu	int	4470B
server2.wlan.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server2.wlan.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server2.wlan.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server2.wlan.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server2.wlan.pcapRecorder.fileFormat	string	“pcapng”
server2.wlan.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server2.wlan.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server2.wlan.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server2.wlan.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server2.wlan.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server2.wlan.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server2.wlan.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server2.wlan.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server2.wlan.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server2.wlan.mib.displayStringTextFormat	string	“Address: {address}{ssidStr}\n{modeStr}{stationTypeStr}{qosStr}{associatedStr}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.agent.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.agent.interfaceTableModule	string		The path to the InterfaceTable module
server2.wlan.agent.mibModule	string
server2.wlan.agent.activeScan	bool	true	Selects between active and passive scanning
server2.wlan.agent.channelsToScan	string	“”	List of channel numbers to scan (space delimited); empty means all channels
server2.wlan.agent.probeDelay	double	100ms	Delay before sending a probe request during active scanning
server2.wlan.agent.minChannelTime	double	150ms	Min interval to spend on a channel during active scanning
server2.wlan.agent.maxChannelTime	double	300ms	Channel time for passive scanning, and max channel time for active scanning
server2.wlan.agent.authenticationTimeout	double	5s	Timeout for the authentication procedure
server2.wlan.agent.associationTimeout	double	5s	Timeout for the association procedure
server2.wlan.agent.startingTime	double	-1s	Agent starting time.
server2.wlan.agent.defaultSsid	string	“”	List of allowed SSIDs to connect to; leave empty for no filtering
server2.wlan.mgmt.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mgmt.interfaceTableModule	string		The path to the InterfaceTable module
server2.wlan.mgmt.numChannels	int	1	Number of channels to scan
server2.wlan.mgmt.mibModule	string
server2.wlan.mgmt.macModule	string		The path to the MAC module
server2.wlan.mac.dcf.channelAccess.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.channelAccess.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
server2.wlan.mac.dcf.channelAccess.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server2.wlan.mac.dcf.channelAccess.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server2.wlan.mac.dcf.channelAccess.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server2.wlan.mac.dcf.channelAccess.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server2.wlan.mac.dcf.channelAccess.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.channelAccess.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
server2.wlan.mac.dcf.channelAccess.inProgressFrames.originatorMacDataServiceModule	string	“^.^.originatorMacDataService”
server2.wlan.mac.dcf.channelAccess.inProgressFrames.ackHandlerModule	string	“^.^.ackHandler”
server2.wlan.mac.dcf.channelAccess.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.channelAccess.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
server2.wlan.mac.dcf.channelAccess.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
server2.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
server2.wlan.mac.dcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.rateSelection.multicastFrameBitrate	double	-1bps
server2.wlan.mac.dcf.rateSelection.responseAckFrameBitrate	double	-1bps
server2.wlan.mac.dcf.rateSelection.responseCtsFrameBitrate	double	-1bps
server2.wlan.mac.dcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
server2.wlan.mac.dcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
server2.wlan.mac.dcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
server2.wlan.mac.dcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
server2.wlan.mac.dcf.rateSelection.controlFrameBitrate	double	-1bps
server2.wlan.mac.dcf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.recoveryProcedure.shortRetryLimit	int	7
server2.wlan.mac.dcf.recoveryProcedure.longRetryLimit	int	4
server2.wlan.mac.dcf.originatorProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.originatorProtectionMechanism.rateSelectionModule	string
server2.wlan.mac.dcf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.originatorAckPolicy.rateSelectionModule	string
server2.wlan.mac.dcf.originatorAckPolicy.ackTimeout	double	-1s
server2.wlan.mac.dcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.recipientAckPolicy.rateSelectionModule	string
server2.wlan.mac.dcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.rtsPolicy.rateSelectionModule	string
server2.wlan.mac.dcf.rtsPolicy.ctsTimeout	double	-1s
server2.wlan.mac.dcf.rtsPolicy.rtsThreshold	int	2346B
server2.wlan.mac.dcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.dcf.ctsPolicy.rxModule	string
server2.wlan.mac.dcf.ctsPolicy.rateSelectionModule	string
server2.wlan.mac.hcf.edca.edcaf.pendingQueue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.edcaf.pendingQueue.packetCapacity	int	100	Maximum number of packets in the queue, no limit by default
server2.wlan.mac.hcf.edca.edcaf.pendingQueue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server2.wlan.mac.hcf.edca.edcaf.pendingQueue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server2.wlan.mac.hcf.edca.edcaf.pendingQueue.comparatorClass	string	“inet::ieee80211::MgmtOverDataComparator”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server2.wlan.mac.hcf.edca.edcaf.pendingQueue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server2.wlan.mac.hcf.edca.edcaf.inProgressFrames.displayStringTextFormat	string	“{numInProgress} packets”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.edcaf.inProgressFrames.pendingQueueModule	string	“^.pendingQueue”
server2.wlan.mac.hcf.edca.edcaf.inProgressFrames.originatorMacDataServiceModule	string	“^.^.^.originatorMacDataService”
server2.wlan.mac.hcf.edca.edcaf.inProgressFrames.ackHandlerModule	string	“^.ackHandler”
server2.wlan.mac.hcf.edca.edcaf.contention.displayStringTextFormat	string	“{fsmState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.edcaf.contention.initialChannelBusy	bool	true	Assume that the channel was busy before the simulation started
server2.wlan.mac.hcf.edca.edcaf.contention.backoffOptimization	bool	true	We can pretend the frame has arrived into the queue a little bit earlier, and maybe able to start transmitting immediately
server2.wlan.mac.hcf.edca.edcaf.ackHandler.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.edcaf.txopProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.edcaf.txopProcedure.txopLimit	double	-1s
server2.wlan.mac.hcf.edca.edcaf.recoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.edcaf.recoveryProcedure.shortRetryLimit	int	7
server2.wlan.mac.hcf.edca.edcaf.recoveryProcedure.longRetryLimit	int	4
server2.wlan.mac.hcf.edca.collisionController.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.shortRetryLimit	int	7
server2.wlan.mac.hcf.edca.mgmtAndNonQoSRecoveryProcedure.longRetryLimit	int	4
server2.wlan.mac.hcf.hcca.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.subframeNumThreshold	int	-1	Minimum number of subframes needed to compose an A-MSDU. (-1 means it won’t be checked)
server2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.aggregationLengthThreshold	int	-1	The minimum length for an aggregated payload necessary to create an A-MSDU (-1 means it won’t be checked).
server2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.maxAMsduSize	int	4065	-1 means infinity
server2.wlan.mac.hcf.originatorMacDataService.msduAggregationPolicy.qOsCheck	bool	true	Turns on/off the check of the presence of the QoS flag (false means off – this is needed for aggregation in DCF mode).
server2.wlan.mac.hcf.originatorMacDataService.mpduAggregationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.originatorMacDataService.fragmentationPolicy.fragmentationThreshold	int	1500B
server2.wlan.mac.hcf.singleProtectionMechanism.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.singleProtectionMechanism.rateSelectionModule	string
server2.wlan.mac.hcf.rateSelection.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.rateSelection.multicastFrameBitrate	double	-1bps
server2.wlan.mac.hcf.rateSelection.responseAckFrameBitrate	double	-1bps
server2.wlan.mac.hcf.rateSelection.responseBlockAckFrameBitrate	double	-1bps
server2.wlan.mac.hcf.rateSelection.responseCtsFrameBitrate	double	-1bps
server2.wlan.mac.hcf.rateSelection.dataFrameBitrate	double	-1bps	Fastest
server2.wlan.mac.hcf.rateSelection.dataFrameBandwidth	double	nan Hz	Unspecified by default
server2.wlan.mac.hcf.rateSelection.dataFrameNumSpatialStreams	int	-1	Unspecified by default
server2.wlan.mac.hcf.rateSelection.mgmtFrameBitrate	double	-1bps	Fastest
server2.wlan.mac.hcf.rateSelection.controlFrameBitrate	double	-1bps
server2.wlan.mac.hcf.originatorAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.originatorAckPolicy.rateSelectionModule	string
server2.wlan.mac.hcf.originatorAckPolicy.blockAckReqThreshold	int	5
server2.wlan.mac.hcf.originatorAckPolicy.maxBlockAckPolicyFrameLength	int	1000B
server2.wlan.mac.hcf.originatorAckPolicy.blockAckTimeout	double	-1s
server2.wlan.mac.hcf.originatorAckPolicy.ackTimeout	double	-1s
server2.wlan.mac.hcf.recipientAckPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.recipientAckPolicy.rateSelectionModule	string
server2.wlan.mac.hcf.rtsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.rtsPolicy.rateSelectionModule	string
server2.wlan.mac.hcf.rtsPolicy.ctsTimeout	double	-1s
server2.wlan.mac.hcf.rtsPolicy.rtsThreshold	int	2346B
server2.wlan.mac.hcf.ctsPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.ctsPolicy.rxModule	string
server2.wlan.mac.hcf.ctsPolicy.rateSelectionModule	string
server2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
server2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.aMsduSupported	bool	true
server2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
server2.wlan.mac.hcf.originatorBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
server2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.delayedAckPolicySupported	bool	false
server2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.aMsduSupported	bool	true
server2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.maximumAllowedBufferSize	int	64
server2.wlan.mac.hcf.recipientBlockAckAgreementPolicy.blockAckTimeoutValue	double	0s	0 means that it depends on the originator
server2.wlan.mac.ds.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.ds.mibModule	string
server2.wlan.mac.rx.displayStringTextFormat	string	“{rxStatus}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.tx.displayStringTextFormat	string	“{txFramePrefix}{txState}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.wlan.mac.tx.rxModule	string
server2.ppp.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ppp.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server2.ppp.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server2.ppp.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server2.ppp.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server2.ppp.pcapRecorder.fileFormat	string	“pcapng”
server2.ppp.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server2.ppp.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server2.ppp.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server2.ppp.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server2.ppp.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server2.ppp.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server2.ppp.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server2.ppp.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server2.ppp.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server2.ppp.queue.displayStringTextFormat	string	“contains %p pk (%l) pushed %u\npulled %o removed %r dropped %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ppp.queue.packetCapacity	int	10000	Maximum number of packets in the queue, no limit by default
server2.ppp.queue.dataCapacity	int	-1b	Maximum total length of packets in the queue, no limit by default
server2.ppp.queue.dropperClass	string	“inet::queueing::PacketAtCollectionEndDropper”	Determines which packets are dropped when the queue is overloaded, packets are not dropped by default; the parameter must be the name of a C++ class which implements the IPacketDropperFunction C++ interface and is registered via Register_Class
server2.ppp.queue.comparatorClass	string	“”	Determines the order of packets in the queue, insertion order by default; the parameter must be the name of a C++ class which implements the IPacketComparatorFunction C++ interface and is registered via Register_Class
server2.ppp.queue.bufferModule	string	“”	Relative module path to the IPacketBuffer module used by this queue, implicit buffer by default
server2.ppp.ppp.displayStringTextFormat	string	“rate: %b\nsent: %s, rcvd: %r\nqueue: %q, drop: %d”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ppp.ppp.interfaceTableModule	string		The path to the InterfaceTable module
server2.ppp.ppp.sendRawBytes	bool	false	When true packets are serialized into a sequence of bytes before sending out
server2.ppp.ppp.mtu	int	4470B
server2.ppp.ppp.stopOperationExtraTime	double	-1s	Extra time after lifecycle stop operation finished
server2.ppp.ppp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
server2.eth.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.eth.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server2.eth.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server2.eth.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server2.eth.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server2.eth.pcapRecorder.fileFormat	string	“pcapng”
server2.eth.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server2.eth.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server2.eth.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server2.eth.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server2.eth.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server2.eth.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server2.eth.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server2.eth.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server2.eth.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server2.tun.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.tun.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server2.tun.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server2.tun.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server2.tun.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server2.tun.pcapRecorder.fileFormat	string	“pcapng”
server2.tun.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server2.tun.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server2.tun.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server2.tun.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server2.tun.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server2.tun.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server2.tun.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server2.tun.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server2.tun.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server2.tun.tun.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.tun.tun.interfaceTableModule	string		The path to the InterfaceTable module
server2.tun.tun.mtu	int	1500B
server2.virt.pcapRecorder.displayStringTextFormat	string	“rec: %n pks”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.virt.pcapRecorder.verbose	bool	true	Whether to log packets on the module output
server2.virt.pcapRecorder.recordEmptyPackets	bool	true	Specifies if zero length packets are recorded or not
server2.virt.pcapRecorder.enableConvertingPackets	bool	true	Specifies if converting packets to link type is allowed or not
server2.virt.pcapRecorder.pcapFile	string	“”	The PCAP file to be written, suggested value: pcapFile = “${resultdir}/${configname}-#${runnumber}” + fullpath() + “.pcap”
server2.virt.pcapRecorder.fileFormat	string	“pcapng”
server2.virt.pcapRecorder.snaplen	int	65535	Maximum number of bytes to record per packet
server2.virt.pcapRecorder.timePrecision	int	6	Time precision in recorded file. pcap supports only 6 (usec) or 9 (nanosec), pcapng supports more values (see ‘if_tsresol’ option in pcapng file format).
server2.virt.pcapRecorder.dumpBadFrames	bool	true	Enable dump of frames with hasBitError
server2.virt.pcapRecorder.sendingSignalNames	string	“transmissionEnded”	Space-separated list of outbound packet signals to subscribe to
server2.virt.pcapRecorder.receivingSignalNames	string	“receptionEnded”	Space-separated list of inbound packet signals to subscribe to
server2.virt.pcapRecorder.dumpProtocols	string	“ethernetmac ppp ieee80211mac”	Space-separated list of protocol names as defined in the Protocol class
server2.virt.pcapRecorder.packetFilter	object	“*”	Which packets are considered, matches all packets by default
server2.virt.pcapRecorder.helpers	string	“”	Usable PcapRecorder::IHelper helpers for accept packettype and store/convert packet as specified linktype
server2.virt.pcapRecorder.alwaysFlush	bool	false	Flush the pcapFile after each write to ensure that all packets are captured in case of a crash
server2.virt.tunnel.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.virt.tunnel.interfaceTableModule	string
server2.virt.tunnel.realInterface	string
server2.virt.tunnel.protocol	string	vlanId != -1 ? “ieee8021qctag” : “”
server2.virt.tunnel.address	string	“copy”
server2.virt.tunnel.vlanId	int	-1
server2.virt.tunnel.steal	bool	vlanId != -1
server2.ipv4.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.configurator.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv4.configurator.routingTableModule	string
server2.ipv4.configurator.networkConfiguratorModule	string	“configurator”	The absolute path to the Ipv4NetworkConfigurator; use “” if there is no configurator
server2.ipv4.configurator.configureRoutingTable	bool	true	Add routing entries to the routing table (uses the configurator module)
server2.ipv4.routingTable.displayStringTextFormat	string	“{routingTableStatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv4.routingTable.routerId	string	“auto”	For routers, the router id using IPv4 address dotted
server2.ipv4.routingTable.netmaskRoutes	string	“*”	Maintain netmask routes for interfaces
server2.ipv4.routingTable.forwarding	bool	true	Turns IP forwarding on/off
server2.ipv4.routingTable.multicastForwarding	bool	false	Turns multicast forwarding on/off
server2.ipv4.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
server2.ipv4.routingTable.routingFile	string	“”	Routing table file name
server2.ipv4.natTable.displayStringTextFormat	string	“{numNatEntries} entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.natTable.networkProtocolModule	string	“^.ip”
server2.ipv4.natTable.config	xml	xml(“<config></config>”)	XML configuration parameters for network address translation
server2.ipv4.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.up.interfaceTableModule	string		Module path to the InterfaceTable module
server2.ipv4.up.forwardServiceRegistration	bool	true
server2.ipv4.up.forwardProtocolRegistration	bool	true
server2.ipv4.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.ipv4.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.ipv4.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.ipv4.igmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.igmp.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv4.igmp.routingTableModule	string
server2.ipv4.igmp.checksumMode	string	“declared”
server2.ipv4.igmp.enabled	bool	true
server2.ipv4.igmp.robustnessVariable	int	2	IGMP is robust to (robustnessVariable-1) packet loss
server2.ipv4.igmp.queryInterval	double	125s
server2.ipv4.igmp.queryResponseInterval	double	10s
server2.ipv4.igmp.groupMembershipInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval
server2.ipv4.igmp.otherQuerierPresentInterval	double	(robustnessVariable * queryInterval) + (queryResponseInterval / 2)
server2.ipv4.igmp.startupQueryInterval	double	queryInterval / 4
server2.ipv4.igmp.startupQueryCount	int	robustnessVariable
server2.ipv4.igmp.lastMemberQueryInterval	double	1s
server2.ipv4.igmp.lastMemberQueryCount	int	robustnessVariable
server2.ipv4.igmp.unsolicitedReportInterval	double	10s
server2.ipv4.icmp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.icmp.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv4.icmp.routingTableModule	string
server2.ipv4.icmp.checksumMode	string	“declared”
server2.ipv4.icmp.quoteLength	int	8B	Number of bytes from original packet to quote in ICMP reply
server2.ipv4.mp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.mp.interfaceTableModule	string		Module path to the InterfaceTable module
server2.ipv4.mp.forwardServiceRegistration	bool	true
server2.ipv4.mp.forwardProtocolRegistration	bool	true
server2.ipv4.mp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.ipv4.mp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.ipv4.mp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.ipv4.ip.displayStringTextFormat	string	“{ipv4StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.ip.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv4.ip.routingTableModule	string
server2.ipv4.ip.arpModule	string
server2.ipv4.ip.icmpModule	string
server2.ipv4.ip.checksumMode	string	“declared”
server2.ipv4.ip.timeToLive	int	32
server2.ipv4.ip.multicastTimeToLive	int	32
server2.ipv4.ip.fragmentTimeout	double	60s
server2.ipv4.ip.limitedBroadcast	bool	false	Send out limited broadcast packets coming from the higher layer
server2.ipv4.ip.directBroadcastInterfaces	string	“”	List of interfaces where direct broadcast is enabled (by default direct broadcast is disabled on all interfaces)
server2.ipv4.ip.enableLocalOutMulticastRouting	bool	false	Enable using the multicast routing table for determining outgoing interfaces for local out packets
server2.ipv4.ip.enableTimestampOption	bool	false	When enabled, IP inserts a timestamp option into the IP header
server2.ipv4.ip.maxLifetime	double	-1s	Packets older than the limit are discarded
server2.ipv4.arp.displayStringTextFormat	string	“size:{arpCacheSize} sent:{numRequestsSent}\nrepl:{numRepliesSent} fail:{numFailedResolutions}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.arp.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv4.arp.routingTableModule	string
server2.ipv4.arp.retryTimeout	double	1s	Number of seconds ARP waits between retries to resolve an IPv4 address
server2.ipv4.arp.retryCount	int	3	Number of times ARP will attempt to resolve an IPv4 address
server2.ipv4.arp.cacheTimeout	double	120s	Number of seconds unused entries in the cache will time out
server2.ipv4.arp.proxyArpInterfaces	string	“*”	List of interfaces that proxy ARP is enabled on (all interfaces by default)
server2.ipv4.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.ipsec.networkProtocolModule	string	“^.ip”
server2.ipv4.ipsec.networkProtocol	string	“ipv4”	address family this instance protects (set to “ipv6” in Ipv6NetworkLayer)
server2.ipv4.ipsec.interfaceTableModule	string
server2.ipv4.ipsec.spdModule	string	“^.spd”
server2.ipv4.ipsec.sadModule	string	“^.sad”
server2.ipv4.ipsec.spdConfig	xml
server2.ipv4.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
server2.ipv4.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
server2.ipv4.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
server2.ipv4.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
server2.ipv4.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
server2.ipv4.ipsec.ahProtectOutDelay	double	0.0s
server2.ipv4.ipsec.ahProtectInDelay	double	0.0s
server2.ipv4.ipsec.espProtectOutDelay	double	0.0s
server2.ipv4.ipsec.espProtectInDelay	double	0.0s
server2.ipv4.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv4.lp.interfaceTableModule	string		Module path to the InterfaceTable module
server2.ipv4.lp.forwardServiceRegistration	bool	true
server2.ipv4.lp.forwardProtocolRegistration	bool	true
server2.ipv4.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.ipv4.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.ipv4.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.ipv6.configurator.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.configurator.interfaceTableModule	string
server2.ipv6.configurator.routingTableModule	string
server2.ipv6.configurator.networkConfiguratorModule	string	“”	The absolute path to the Ipv6NetworkConfigurator; use “” if there is no configurator
server2.ipv6.configurator.configureRoutingTable	bool	true
server2.ipv6.routingTable.displayStringTextFormat	string	“{numRoutes} routes\n{numDestCache} destcache entries”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.routingTable.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv6.routingTable.routes	xml	xml(“<routingTable/>”)
server2.ipv6.routingTable.forwarding	bool	false
server2.ipv6.routingTable.isRouter	bool	this.forwarding
server2.ipv6.routingTable.multicastForwarding	bool	false
server2.ipv6.routingTable.useAdminDist	bool	false	Use Cisco-like administrative distances
server2.ipv6.routingTable.advManagedFlag	bool	false	“Managed address configuration” (M) flag in RAs
server2.ipv6.routingTable.advOtherConfigFlag	bool	false	“Other configuration” (O) flag in RAs
server2.ipv6.routingTable.advLinkMtu	int	1280	MTU option in RAs (1280 = IPv6 minimum MTU, 0 = don’t include)
server2.ipv6.routingTable.advCurHopLimit	int	30	Cur Hop Limit field in RAs (0 = unspecified)
server2.ipv6.routingTable.advDefaultLifetime	double	-1s	Router Lifetime in RAs (-1 = auto: 3*maxRtrAdvInterval)
server2.ipv6.up.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.up.interfaceTableModule	string		Module path to the InterfaceTable module
server2.ipv6.up.forwardServiceRegistration	bool	true
server2.ipv6.up.forwardProtocolRegistration	bool	true
server2.ipv6.up.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.ipv6.up.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.ipv6.up.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.ipv6.icmpv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.icmpv6.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv6.icmpv6.checksumMode	string	“declared”
server2.ipv6.icmpv6.mldModule	string	“”	Path to the MLD module, or “” if MLD is not enabled; MLD messages are dropped when empty
server2.ipv6.lp.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.lp.interfaceTableModule	string		Module path to the InterfaceTable module
server2.ipv6.lp.forwardServiceRegistration	bool	true
server2.ipv6.lp.forwardProtocolRegistration	bool	true
server2.ipv6.lp.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.ipv6.lp.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.ipv6.lp.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.ipv6.neighbourDiscovery.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.neighbourDiscovery.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv6.neighbourDiscovery.checksumMode	string	“declared”
server2.ipv6.neighbourDiscovery.icmpv6Module	string
server2.ipv6.neighbourDiscovery.mipv6Module	string
server2.ipv6.neighbourDiscovery.routingTableModule	string
server2.ipv6.neighbourDiscovery.minIntervalBetweenRAs	double	200s	RFC 4861: MinRtrAdvInterval (0.33 * MaxRtrAdvInterval)
server2.ipv6.neighbourDiscovery.maxIntervalBetweenRAs	double	600s	RFC 4861: MaxRtrAdvInterval
server2.ipv6.neighbourDiscovery.advReachableTime	double	3600s	advertised reachable time in RAs; hosts use it as base for NUD
server2.ipv6.neighbourDiscovery.dupAddrDetectTransmits	int	1	RFC 4862 Section 5.1: number of NS sent for DAD (0 = disable DAD)
server2.ipv6.neighbourDiscovery.optimisticDad	bool	false	RFC 4429 Optimistic DAD: if true, an autoconfigured address may be used as a source address while DAD is still in progress; if false (RFC 4862), packets that would use it are deferred until DAD completes
server2.ipv6.neighbourDiscovery.detectL2Movement	bool	true	if true (default), (re)start Router Discovery (send Router Solicitations) whenever an interface associates at the link layer (e.g. a wireless handover to a new access point); lets a mobile node detect movement and obtain a new care-of address immediately, instead of relying on frequent unsolicited Router Advertisements (cf. MIPv6 fast RAs). Set to false to restore the legacy behaviour (movement detected only from periodic Router Advertisements)
server2.ipv6.neighbourDiscovery.retransTimer	double	1s	RFC 4861 Section 10: delay between retransmitted NS messages
server2.ipv6.neighbourDiscovery.baseReachableTime	double	30s	RFC 4861 Section 10: base value for computing random ReachableTime
server2.ipv6.neighbourDiscovery.routerBootupTime	double	uniform(0s, 0.3s)	random startup delay before a router assigns its link-local address; routers boot faster than hosts so that RAs are available by the time hosts solicit
server2.ipv6.neighbourDiscovery.hostBootupTime	double	uniform(0.4s, 1s)	random startup delay before a host assigns its link-local address
server2.ipv6.ipv6.displayStringTextFormat	string	“{ipv6StatusText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.ipv6.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv6.ipv6.routingTableModule	string
server2.ipv6.ipv6.ipv6NeighbourDiscoveryModule	string
server2.ipv6.ipv6.icmpv6Module	string
server2.ipv6.ipv6.procDelay	double	0s
server2.ipv6.ipv6.sendRedirects	bool	true	RFC 4861 Section 8.2: when a router forwards a packet back out the interface it arrived on, send the source an ICMPv6 Redirect. Disable on wireless multi-hop / ad-hoc networks (e.g. MANET routing), where the geographic next hop is not directly reachable by the source, so redirects are useless and trigger a storm.
server2.ipv6.ipsec.displayStringTextFormat	string	“IN: ACCEPT: {inAccept} DROP: {inDrop} BYPASS: {inBypass}\n OUT: PROTECT: {outProtect} DROP: {outDrop} BYPASS: {outBypass}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.ipsec.interfaceTableModule	string
server2.ipv6.ipsec.spdModule	string	“^.spd”
server2.ipv6.ipsec.sadModule	string	“^.sad”
server2.ipv6.ipsec.spdConfig	xml
server2.ipv6.ipsec.defaultProtection	string	“”	If not “”: value to use where <Protection> element is absent from the configuration
server2.ipv6.ipsec.defaultEspMode	string	“”	If not “”: value to use where <EspMode> element is absent from the configuration
server2.ipv6.ipsec.defaultEncryptionAlg	string	“”	If not “”: value to use where <EncryptionAlg> element is absent from the configuration
server2.ipv6.ipsec.defaultAuthenticationAlg	string	“”	If not “”: value to use where <defaultAuthenticationAlg> element is absent from the configuration
server2.ipv6.ipsec.defaultMaxTfcPadLength	int	0	Value to use where <MaxTfcPadLength> element is absent from the configuration
server2.ipv6.ipsec.ahProtectOutDelay	double	0.0s
server2.ipv6.ipsec.ahProtectInDelay	double	0.0s
server2.ipv6.ipsec.espProtectOutDelay	double	0.0s
server2.ipv6.ipsec.espProtectInDelay	double	0.0s
server2.ipv6.spd.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.sad.displayStringTextFormat	string	“entries: {numEntries}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.mipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.mipv6.interfaceTableModule	string		The path to the InterfaceTable module
server2.ipv6.mipv6.ipv6NeighbourDiscoveryModule	string
server2.ipv6.mipv6.bindingUpdateListModule	string
server2.ipv6.mipv6.bindingCacheModule	string
server2.ipv6.mipv6.isHomeAgent	bool
server2.ipv6.mipv6.isMobileNode	bool
server2.ipv6.mipv6.maxHaBindingLifeTime	double	3600s	max binding lifetime for HA registration
server2.ipv6.mipv6.maxRrBindingLifeTime	double	420s	max binding lifetime for CN (route optimization)
server2.ipv6.mipv6.useRouteOptimization	bool	true	whether a mobile node route-optimizes with correspondent nodes (RFC 3775); if false, their traffic always uses the bidirectional home-agent tunnel
server2.ipv6.buList.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.bindingCache.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.pmipv6.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.pmipv6.interfaceTableModule	string		path to the InterfaceTable module
server2.ipv6.pmipv6.ipv6NeighbourDiscoveryModule	string		path to the Ipv6NeighbourDiscovery module
server2.ipv6.pmipv6.isLocalMobilityAnchor	bool	false	(the IPv6 routing table is resolved automatically)
server2.ipv6.pmipv6.isMobileAccessGateway	bool	false
server2.ipv6.pmipv6.localMobilityAnchorAddress	string	“”	MAG: the address of the LMA to register mobile nodes with
server2.ipv6.pmipv6.mobileNodeProfiles	xml	xml(“<mobileNodes/>”)	MAG: mobile-node policy profiles, one per access interface, e.g. <mobileNodes> <mobileNode accessInterface=”wlan0” id=”mn1@example.com” homeNetworkPrefix=”2001:db8:1::” prefixLength=”64”/> </mobileNodes> (accessInterface may be omitted to match any access interface)
server2.ipv6.pmipv6.bindingLifetime	double	3600s	lifetime requested in Proxy Binding Updates
server2.ipv6.pmipv6.homeNetworkPrefixAdvValidLifetime	double	3600s	MAG: valid lifetime of the advertised home network prefix
server2.ipv6.pmipv6.homeNetworkPrefixAdvPreferredLifetime	double	1800s	MAG: preferred lifetime of the advertised home network prefix
server2.ipv6.mld.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.ipv6.mld.interfaceTableModule	string		path to the InterfaceTable module
server2.ipv6.mld.routingTableModule	string		path to the Ipv6RoutingTable module
server2.ipv6.mld.checksumMode	string	“declared”	how the ICMPv6 checksum is handled
server2.ipv6.mld.enabled	bool	true	when false, MLD is inert on this node (see above)
server2.ipv6.mld.unsolicitedReportInterval	double	10s	host: delay before the repeated Report after a join
server2.ipv6.mld.robustnessVariable	int	2	loss tolerance; only supplies the defaults of the three params marked (RV) below
server2.ipv6.mld.queryInterval	double	125s	querier: interval between periodic General Queries
server2.ipv6.mld.queryResponseInterval	double	10s	querier: max delay a host may wait before answering a General Query
server2.ipv6.mld.multicastListenerInterval	double	(robustnessVariable * queryInterval) + queryResponseInterval	querier: how long a group stays “has listeners” without a new Report (RV)
server2.ipv6.mld.startupQueryInterval	double	queryInterval / 4	querier: interval between the initial General Queries at startup
server2.ipv6.mld.startupQueryCount	int	robustnessVariable	querier: number of General Queries sent at startup (RV)
server2.ipv6.mld.lastListenerQueryInterval	double	1s	querier: interval between the group-specific Queries sent after a Done
server2.ipv6.mld.lastListenerQueryCount	int	robustnessVariable	querier: number of group-specific Queries sent after a Done (RV)
server2.nl.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.nl.interfaceTableModule	string		Module path to the InterfaceTable module
server2.nl.forwardServiceRegistration	bool	true
server2.nl.forwardProtocolRegistration	bool	true
server2.nl.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.nl.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.nl.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.udp.displayStringTextFormat	string	“passed up: {numPassedUp} pks\nsent: {numSent} pks{udpDroppedText}”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.udp.interfaceTableModule	string		The path to the InterfaceTable module
server2.udp.checksumMode	string	“declared”
server2.udp.defaultMulticastLoop	bool	true
server2.tcp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.tcp.checksumMode	string	“declared”
server2.tcp.advertisedWindow	int	14 * this.mss	In bytes, corresponds with the maximal receiver buffer capacity (Note: normally, NIC queues should be at least this size)
server2.tcp.delayedAcksEnabled	bool	false	Delayed ACK algorithm (RFC 1122) enabled/disabled
server2.tcp.nagleEnabled	bool	true	Nagle’s algorithm (RFC 896) enabled/disabled
server2.tcp.limitedTransmitEnabled	bool	false	Limited Transmit algorithm (RFC 3042) enabled/disabled (can be used for TcpReno/TcpTahoe/TcpNewReno/TcpNoCongestionControl)
server2.tcp.increasedIWEnabled	bool	false	Increased Initial Window (RFC 3390) enabled/disabled
server2.tcp.sackSupport	bool	false	Selective Acknowledgment (RFC 2018, 2883, 3517) support (header option) (SACK will be enabled for a connection if both endpoints support it)
server2.tcp.windowScalingSupport	bool	false	Window Scale (RFC 1323) support (header option) (WS will be enabled for a connection if both endpoints support it)
server2.tcp.windowScalingFactor	int	-1	Window Scaling Factor given as a shift count. Valid values are 0..14, and -1 for automatic selection (it chooses the smallest shift count that makes advertisedWindow representable in 16 bits)
server2.tcp.timestampSupport	bool	false	Timestamps (RFC 1323) support (header option) (TS will be enabled for a connection if both endpoints support it)
server2.tcp.mss	int	536	Maximum Segment Size (header option). Default 536 per RFC 1122.
server2.tcp.msl	int	120s	Maximum Segment Lifetime
server2.tcp.tcpAlgorithmClass	string	“TcpReno”
server2.tcp.dupthresh	int	3	Used for TcpTahoe, TcpReno, and SACK (RFC 3517) DO NOT change unless you really know what you are doing
server2.tcp.initialSsthresh	int	0xFFFFFFFF	Initial value for Slow Start threshold used in TahoeRenoFamily. The initial value of ssthresh SHOULD be set arbitrarily high (e.g., to the size of the largest possible advertised window) Without user interaction there is no limit…
server2.tcp.stopOperationExtraTime	double	0s	Extra time after lifecycle stop operation finished
server2.tcp.stopOperationTimeout	double	2s	Timeout value for lifecycle stop operation
server2.tcp.ecnWillingness	bool	false	True if willing to use ECN
server2.tcp.dctcpGamma	double	0.0625	A fixed estimation gain for calculating dctcp_alpha (RFC 8257 4.2)
server2.tcp.pmtudEnabled	bool	false	Path MTU Discovery (RFC 1191, RFC 1981) enabled/disabled
server2.tcp.pmtudTimeout	double	600s	Time after which the original MSS is restored to probe for increased path MTU (RFC 1191, Section 6.3)
server2.sctp.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.sctp.interfaceTableModule	string
server2.sctp.routingTableModule	string
server2.sctp.checksumMode	string	“declared”
server2.sctp.numGapReports	int	3
server2.sctp.rtoInitial	double	3s
server2.sctp.rtoMin	double	1s
server2.sctp.rtoMax	double	60s
server2.sctp.rtoAlpha	double	0.125
server2.sctp.rtoBeta	double	0.250
server2.sctp.maxBurst	int	4
server2.sctp.maxBurstVariant	string	“maxBurst”
server2.sctp.initialWindow	int	0
server2.sctp.assocMaxRetrans	int	10
server2.sctp.pathMaxRetrans	int	5
server2.sctp.maxInitRetrans	int	8
server2.sctp.sackPeriod	double	200ms
server2.sctp.sackFrequency	int	2
server2.sctp.reactivatePrimaryPath	bool	false
server2.sctp.sendQueueLimit	int	0
server2.sctp.validCookieLifetime	double	10s
server2.sctp.enableHeartbeats	bool	true
server2.sctp.hbInterval	double	30s
server2.sctp.sendHeartbeatsOnActivePaths	bool	false
server2.sctp.nagleEnabled	bool	true
server2.sctp.naglePoint	int	1468
server2.sctp.fragPoint	int	1452	Size of a message that has to be fragmented, i.e. maximum size of a fragment
server2.sctp.fastRecoverySupported	bool	true
server2.sctp.sctpAlgorithmClass	string	“SctpAlg”
server2.sctp.ccModule	int	0	RFC4960=0
server2.sctp.osbWithHeader	bool	false
server2.sctp.RTXMethod	int	0	0=Once after 3 Sacks; 1=once per RTT; 2=Switch off Fast Retransmit; 3=Always after 3 Sacks
server2.sctp.ssModule	int	0	ROUND_ROBIN=0
server2.sctp.arwnd	int	65535
server2.sctp.swsLimit	int	3000	Limit for SWS
server2.sctp.udpEncapsEnabled	bool	false
server2.sctp.natFriendly	bool	false
server2.sctp.bytesToAddPerRcvdChunk	int	0	For flow control
server2.sctp.bytesToAddPerPeerChunk	int	0	For flow control
server2.sctp.tellArwnd	bool	false	For flow control
server2.sctp.messageAcceptLimit	int	0	For flow control
server2.sctp.fairStart	double	0s
server2.sctp.fairStop	double	0s
server2.sctp.streamsToPaths	string	“”
server2.sctp.startEndToEndDelay	int	0
server2.sctp.stopEndToEndDelay	int	10
server2.sctp.throughputInterval	double	1
server2.sctp.auth	bool	false
server2.sctp.chunks	string	“”
server2.sctp.padding	bool	false
server2.sctp.addIP	bool	false
server2.sctp.addTime	double	0s
server2.sctp.addAddress	string	“”
server2.sctp.addIpType	string	“0”	SET_PRIMARY_ADDRESS=49156,ADD_IP_ADDRESS=49153,DELETE_IP_ADDRESS=49154
server2.sctp.packetDrop	bool	false
server2.sctp.sackNow	bool	false
server2.sctp.highSpeedCC	bool	false
server2.sctp.checkSackSeqNumber	bool	false
server2.sctp.nrSack	bool	false
server2.sctp.disableReneging	bool	false
server2.sctp.gapReportLimit	int	100000000
server2.sctp.gapListOptimizationVariant	string	“none”
server2.sctp.smartOverfullSACKHandling	bool	false
server2.sctp.allowQoSTracking	bool	false
server2.sctp.qosTrackingInterval	double	1.0s
server2.sctp.cmtSendAllVariant	string	“normal”
server2.sctp.cmtRetransmissionVariant	string	“normal”
server2.sctp.cmtCUCVariant	string	“normal”
server2.sctp.cmtBufferSplitVariant	string	“none”
server2.sctp.cmtBufferSplittingUsesOSB	bool	false
server2.sctp.cmtUseSFR	bool	true
server2.sctp.cmtUseDAC	bool	true
server2.sctp.cmtUseFRC	bool	true
server2.sctp.cmtSmartT3Reset	bool	true
server2.sctp.cmtSmartFastRTX	bool	true
server2.sctp.cmtSmartReneging	bool	false
server2.sctp.cmtSlowPathRTTUpdate	bool	false
server2.sctp.cmtChunkReschedulingVariant	string	“none”
server2.sctp.cmtChunkReschedulingThreshold	double	0.5
server2.sctp.cmtMovedChunksReduceCwnd	bool	true
server2.sctp.movedChunkFastRTXFactor	double	2.0
server2.sctp.cmtSackPath	string	“standard”
server2.sctp.strictCwndBooking	bool	false
server2.sctp.cmtCCVariant	string	“off”	CMT Congestion Control Variant off = use over every path the default RFC4960 CC (New Reno) lia = First resource pooling congestion control RFC6356 adapted for SCTP - https://datatracker.ietf.org/doc/rfc6356/ olia = alternative MPTCP CC, adapted for SCTP- https://tools.ietf.org/html/draft-khalili-mptcp-congestion-control-05 cmtrpv1 = First resource pooling based CC for SCTP - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/AINA2010.pdf cmtrpv2 = Updated version of cmtrpv1 - https://www.tdr.wiwi.uni-due.de/fileadmin/fileupload/I-TDR/SCTP/Paper/ConTEL2011.pdf
server2.sctp.cmtCCPathGroups	string	“”
server2.sctp.rpPathBlocking	bool	false
server2.sctp.rpScaleBlockingTimeout	bool	false
server2.sctp.rpMinCwnd	int	1
server2.quic.displayStringTextFormat	string	“”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.quic.routingTableModule	string		Set by StandardHost.
server2.quic.sendZeroRttTokenAsServer	bool	false
server2.quic.congestionControl	string	“NewReno”	Sets the congestion control algorithm (NewReno or No).
server2.quic.accurateIncreaseInNewRenoCongestionAvoidance	bool	true	For NewReno in Congestion Avoidance, if true, increases cwnd after cwnd-acked bytes; if false, increases cwnd on every acked packet by acked_bytes/cwnd.
server2.quic.sendQueueLimit	int	64MB	Sets the limit of the send queue in bytes.
server2.quic.sendQueueLowWaterRatio	double	.4	Defines the send queue low water mark relative to the limit.
server2.quic.initialMaxData	int	15MB	Connection level flow control credit. Used as own and peer’s value.
server2.quic.initialMaxStreamData	int	6MB	Stream level flow control credit for any stream (unidirectional, bidirectional local and remote). Used as own and peer’s value.
server2.quic.maxDataFrameThreshold	double	0.5*initialMaxData	Defines when MaxDataFrame in ConnectionFlowControl will be send.
server2.quic.maxStreamDataFrameThreshold	double	0.5*initialMaxStreamData	Defines when MaxStreamDataFrame in StreamFlowControl will be send.
server2.quic.roundConsumedDataValue	bool	false	If true, FlowControlResponder rounds consumedData in streamRcvBuffer to the next packetSize.
server2.quic.sendMaxDataFramesImmediately	bool	false	If true, a MAX_(STREAM)_DATA frame is sent immediately, after generation. Otherwise, sending the frame is delayed until the sending process starts due to another event.
server2.quic.bundleAckForNonAckElicitingPackets	bool	false	If true, bundles ack for non-ack-eliciting packets in an outgoing packet.
server2.quic.numReceivedAckElicitingsBeforeAck	int	2	Number of ack eliciting packets a receiver waits for, before it sends an ACK, immediately.
server2.quic.useIBit	bool	false	If true, an ACK frame is sent immediately upon an ack-eliciting packet with the I-Bit set.
server2.quic.useDplpmtud	bool	false	If true, uses DPLPMTUD (RFC8899) to determine the PMTU.
server2.quic.maxPmtu	int	65535B	With useDplpmtud, it is used as upper limit for the PMTU search. Without useDplpmtud, the PMTU is set to the minimum of the MTU of the outgoing interface and this value.
server2.quic.dplpmtudMinPmtu	int	0	Specifies the minimum PMTU to use (if 0, it uses 1200 B for IPv4 or 1280 B for IPv6 as minimum PMTU).
server2.quic.dplpmtudMaxProbes	int	3	Specifies the number of probe packet sent for one candidate before given up.
server2.quic.dplpmtudUsePtb	bool	true	If true, uses ICMP Packet Too Big (PTB) messages for DPLPMTUD.
server2.quic.dplpmtudCandidateSequence	string	“OptBinary”	Specifies the sequence of candidates used for the search algorithm of DPLPMTUD (Up, Down, OptUp, Binary, OptBinary, Jump).
server2.quic.skipPacketNumberForDplpmtudProbePackets	bool	false	Specifies whether to skip a packet number for a DPLPMTUD probe packet in order to avoid ack delay.
server2.quic.useCwndForParallelProbes	int	0	If 0, no parallel probe packets; if 1, uses the availbale cwnd to send additional probe packets and if 2 prefers to send probe packets over other packets.
server2.quic.sendDataDuringInitalDplpmtudBase	bool	true	If false, waits for DPLPMTUD switching initially to SEARCH before start sending application data.
server2.quic.dplpmtudUsePmtuValidator	bool	true	If true, activates the PMTU Validator that trys to detect when the current PMTU estimation is larger than the actual PMTU.
server2.quic.pmtuValidatorLostPacketsThreshold	int	2	Specifies the number of lost data packets before assuming a decreased PMTU.
server2.quic.pmtuValidatorTimeThreshold	double	-1s	Specifies the time threshold between two lost packets. If negative, pmtuValidatorSrttFactorThreshold is used instead.
server2.quic.pmtuValidatorSrttFactorThreshold	int	1	If pmtuValidatorTimeThreshold is negative, this number multiplied by SRTT is used instead.
server2.quic.pmtuValidatorInvalidOnPersistentCongestion	int	1	If 0, disabled. If 1, the PMTU validator uses persistent congeation as signal for a decreased PMTU. If 2, only two consecutive persisten congestions used as signal. If 3, …
server2.quic.reducePacketTimeThreshold	double	0s	Specifies after which time with no acks, packets with reduced size are sent. If zero, packet size reduction is disabled. If negative, reducePacketPtoFactorThreshold is used instead.
server2.quic.reducePacketPtoFactorThreshold	int	3	If reducePacketTimeThreshold is negative, this number multiplied by PTO is used instead.
server2.tn.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.tn.interfaceTableModule	string		Module path to the InterfaceTable module
server2.tn.forwardServiceRegistration	bool	true
server2.tn.forwardProtocolRegistration	bool	true
server2.tn.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.tn.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.tn.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default
server2.at.displayStringTextFormat	string	“processed {numProcessedPackets} pk ({processedTotalLength})”	Determines the text that is written on top of the submodule, supports displaying pars, watches, and module-specific information
server2.at.interfaceTableModule	string		Module path to the InterfaceTable module
server2.at.forwardServiceRegistration	bool	true
server2.at.forwardProtocolRegistration	bool	true
server2.at.interfaceMapping	object	{}	Maps network interface names to connected submodule names (e.g. {“eth0”: “bridging”}), overrides automatically learned dispatching; * overrides all learned network interfaces, ? overrides default
server2.at.serviceMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ethernetmac”: “bridging”}), overrides automatically learned dispatching; * overrides all learned services, ? overrides default
server2.at.protocolMapping	object	{}	Maps protocols to connected submodule names (e.g. {“ipv4”: “bridging”}), overrides automatically learned dispatching; * overrides all learned protocols, ? overrides default

Source code¶

network DumbbellNetwork extends WiredNetworkBase
{
    parameters:
        *.eth[*].bitrate = default(100Mbps);
    submodules:
        client1: <default("StandardHost")> like IEthernetNetworkNode {
            @display("p=300,150");
        }
        client2: <default("StandardHost")> like IEthernetNetworkNode {
            @display("p=300,350");
        }
        switch1: <default("EthernetSwitch")> like IEthernetNetworkNode {
            @display("p=500,250");
        }
        switch2: <default("EthernetSwitch")> like IEthernetNetworkNode {
            @display("p=700,250");
        }
        server1: <default("StandardHost")> like IEthernetNetworkNode {
            @display("p=900,150");
        }
        server2: <default("StandardHost")> like IEthernetNetworkNode {
            @display("p=900,350");
        }
    connections:
        client1.ethg++ <--> EthernetLink <--> switch1.ethg++;
        client2.ethg++ <--> EthernetLink <--> switch1.ethg++;
        switch2.ethg++ <--> EthernetLink <--> server1.ethg++;
        switch2.ethg++ <--> EthernetLink <--> server2.ethg++;
        switch1.ethg++ <--> EthernetLink <--> switch2.ethg++;
}

File: src/inet/networks/ethernet/DumbbellNetwork.ned