ICcEnergyConsumer¶
Package: inet.power.contract
module interface ICcEnergyConsumer
This interface extends the corresponding energy model interface. It requires implementations to describe energy consumption and energy generation with current [A], and storage capacity with charge [C] and output voltage [V]. The Cc is an abbreviation that is used for charge and current-based interfaces.
See also: ICcEnergySource, ICcEnergyGenerator, ICcEnergySink, ICcEnergyStorage, ICcEnergyManagement
Inheritance diagram¶
Implemented by¶
Name |
Type |
Description |
|---|---|---|
simple module |
This current consumption module extends StateBasedCcEnergyConsumer and provides default values suitable for use in low-power wireless sensor nodes. Values are roughly based on the datasheet for the CC2500 RF transceiver. Used for accurate battery life simulation in wireless sensor networks. |
|
simple module |
Provides a radio energy consumer model. The current consumption is determined by the radio mode, the transmitter state, and the receiver state using constant parameters. |
|
simple module |
Provides a radio power consumer model for IEEE 802.11 radios. Default values are roughly based on CC3220 transceiver. The power consumption is determined by the radio mode, the transmitter state, and the receiver state using constant parameters. |
|
simple module |
This is an abstract base module for current-based energy consumer models. It defines shared signals and statistics. |
Extends¶
Name |
Type |
Description |
|---|---|---|
module interface |
The energy consumer models describe the energy consumption process of devices over time. For example, a radio consumes energy when it transmits or receives signals, or a CPU consumes energy when the network layer processes packets, or a display consumes energy when it’s turned on, etc. |
Properties¶
Name |
Value |
Description |
|---|---|---|
display |
i=block/plug |
Signals¶
Name |
Type |
Unit |
Description |
|---|---|---|---|
currentConsumptionChanged |
double |
Source code¶
//
// This interface extends the corresponding energy model interface. It requires
// implementations to describe energy consumption and energy generation with
// current [A], and storage capacity with charge [C] and output voltage [V].
// The Cc is an abbreviation that is used for charge and current-based interfaces.
//
// @see ~ICcEnergySource, ~ICcEnergyGenerator, ~ICcEnergySink, ~ICcEnergyStorage, ~ICcEnergyManagement
//
moduleinterface ICcEnergyConsumer extends IEnergyConsumer
{
parameters:
@display("i=block/plug");
@signal[currentConsumptionChanged](type=double);
}