IErrorModel¶

Package: inet.physicallayer.wireless.common.contract.packetlevel

module interface IErrorModel

The error model describes how the signal to noise ratio affects the amount of errors at the receiver.

Usage diagram¶

Inheritance diagram¶

Implemented by¶

Name	Type	Description
ApskErrorModel	compound module	This error model determines packet error rate, bit error rate, and symbol error rate by using the well-known formula that corresponds to the modulation. It assumes no forward error correction or any other technique is used in the physical signal.
ErrorModelBase	compound module	Serves as the base module for error models.
StochasticErrorModel	compound module	This error model provides parameters to specify the constant packet error rate, bit error rate, and symbol error rate for receptions independent of any interfering transmission or noise.
Ieee80211OfdmErrorModel	compound module	This is the error model for the layered IEEE 802.11 OFDM PHY infrastructure (IEEE 802.11-2012, Clause 18). OFDM means that the physical layer uses OFDM modulation.
Ieee80211BerTableErrorModel	compound module	(no description)
Ieee80211NistErrorModel	compound module	(no description)
Ieee80211YansErrorModel	compound module	(no description)
Ieee802154ErrorModel	compound module	(no description)

Used in compound modules¶

Name	Type	Description
NarrowbandReceiverBase	compound module	Serves as a base module for narrowband receiver models.

Properties¶

Name	Value	Description
display	i=block/broadcast

Source code¶

//
// The error model describes how the signal to noise ratio affects the amount of
// errors at the receiver.
//
moduleinterface IErrorModel
{
    parameters:
        @display("i=block/broadcast");
}

File: src/inet/physicallayer/wireless/common/contract/packetlevel/IErrorModel.ned