Channels¶

Name	Type	Description
Cable	channel	(no description)
Eth100G	channel	100 gigabit/sec Ethernet link
Eth100M	channel	100 megabit/sec Ethernet link
Eth10G	channel	10 gigabit/sec Ethernet link
Eth10M	channel	10 megabit/sec Ethernet link
Eth1G	channel	1 gigabit/sec Ethernet link
Eth200G	channel	200 gigabit/sec Ethernet link
Eth400G	channel	400 gigabit/sec Ethernet link
Eth40G	channel	40 gigabit/sec Ethernet link
EthernetLink	channel	EthernetLink provides a base channel type for Ethernet connections with configurable length and propagation delay. It extends the Cable type and calculates the delay based on the physical length of the cable and the speed of light in the medium.
EthernetMultidropLink	channel	EthernetMultidropLink models a shared Ethernet medium in a bus topology where multiple nodes connect to a single cable. This channel type is used for simulating 10BASE-T1S with PLCA (Physical Layer Collision Avoidance) Ethernet that use a multidrop configuration.
PeriodicLossChannel	channel	This channel uses the per parameter for periodic packet loss. That means it delivers exactly 1/per packets, followed by one drop. It does not use the BER paramater.
ThruputMeteringChannel	channel	This channel adds support for throughput metering to the datarate channel. A `cDatarateChannel` extended with throughput calculation. Values are displayed on the link, using the connection’s “t=” or “tt=” display string tag.